Influence of Particle Sizes and Volume Fractions on Fatigue Crack Growth Rates of Aerospace Al-Alloys Composites

• Autorzy: Uygur Ilyas

Identyfikatory

DOI

10.24425/amm.2024.149098

• Języki publikacji: EN

Abstrakty

EN

Recently, the need to develop fuel efficient transport systems has led to the development of a range of materials of low density, high stiffness and high strength each can be made at a reasonable cost. The aluminium based alloys are particularly important because of their improved mechanical, physical and technical properties. Fatigue failures have been recognised since the early days of the industrial revolution. Fatigue response of most of materials is related with the microstructural variations in the structure. Hence, in this study, influence of particle size and volume fractions on fatigue properties of Al-alloy composites was investigated. It was found that particle size and volume fraction of reinforcement particles play significant role on fatigue propagation rates, stress intensity threshold values, crack tip opening distance and crack tip plastic zone sizes.

Słowa kluczowe

EN

fatigue crack propagation; particle size; volume fraction; Al-alloy composites

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2024
• Tom: Vol. 69, iss. 1
• Strony: 337--341
• Opis fizyczny: Bibliogr. 26 poz., fot., rys., tab.

Twórcy

autor

Uygur Ilyas

• Duzce University, Faculty of Engineering, Department of Mechanical Eng. 81620, Duzce

• https://orcid.org/0000-0002-8744-5082

Bibliografia

• [1] I. Uygur, PhD thesis, Environmentally assisted fatigue response of Al-Cu-Mg-Mn with SiC particulate metal matrix composites, University of Wales, SWANSEA, U.K. (1999).
• [2] I. Uygur, Iranian J. Sci. & Techn. B28 (B2), 239-248 (2004).
• [3] I. Uygur, H. Saruhan, SDU Int. J. of Techn. Sci. 8 (1), 167-174 (2004) in Turkish.
• [4] S. Kumar, R. Kumar, K.K. Goyal, N. Sharma, Materialstodays: Proceedings 63, 395-399 (2022).
• [5] I. Uygur, W.J. Evans, M. Bache, B. Gulenc, Metallofiz. Nove. Technol. 26 (7), 927-939 (2004).
• [6] J. Xia, J.J. Lewandowski, M.A. Willard, Mater. Sci. and Eng. A 770 (1), 138518 (2020).
• [7] I. Uygur, M.K. Kulekci, Turkish J. of Eng. & Env. Sci. 26 (3), 265-274 (2002).
• [8] Q. Zhang, D.L. Chen, Int. J. of Fatigue 27 (4), 417-427 (2005).
• [9] I. Uygur, Arch. Metall. Mater. 56 (1), 109-115 (2011).
• [10] Y. Wang, H. Ma, Y. Zhang, Eng. Frac. Mech. In Press 108947 (2022).
• [11] I. Uygur, A. Cicek, E. Toklu, R. Kara, S. Saridemir, Arch. Metall. Mater. 59 (1), 97-103 (2014).
• [12] M.R. Bache, W.J. Evans, I. Uygur, Mater. Sci. and Tech. 14 (2), 1065-1069 (1998).
• [13] M.R. Bache, W.J. Evans, A.J. Shakesheff, J. Shields, I. Uygur, Mater. Sci. and Tech. 16 (2), 825-830 (2000).
• [14] S. Bruzzi, P.E. McHugh, Int. J. of Fatigue 26, 795-804 (2004).
• [15] A.A. Ikbal, Y. Arai, W. Araki, Trans. Nonferrous Met. Soc. China 24, 1-13 (2014).
• [16] N. Chawla, V.V. Ganesh, Int. J. of Fatigue 32, 856-863 (2010).
• [17] B.F. Jogi, P.K. Brahmankar, V.S. Nanda, R.C. Prasad, J. of Mater. Proces. Tech. 2001, 380-384 (2008).
• [18] O. Botstein, R. Arone, B. Shpigler, Mater. Sci. and Eng. A 128 (1), 15-22 (1990).
• [19] D.L. Davidson, Eng. Frac. Mech. 33 (6), 965-977 (1990).
• [20] E. Amsterdam, J.W.E. Wiegman, M. Nawijin, J.T.M. De Hosson, Int. J. of Fatigue 161, 106919 (2022).
• [21] J.K. Shang, W. Yu, R.O. Ritchie, Mater. Sci. and Eng. A 102 (2), 181-192 (1988).
• [22] J.K. Shang, R.O. Ritchie, Acta Metall. 37, 2267-2278 (1989).
• [23] J.J. Bonnen, C.P. You, J.E. Allison, W.J. Jones, Fatigue behawior of discontinuously reinforced aluminum matrix composites, in Proceed. of 4th Conf. “Fatigue90”, Honolulu, (1990).
• [24] S. Suresh (Ed.), Fatigue of materials, Cambridge Uni. Press, Cambridge, (1991).
• [25] W. Yu, J. Wang, Z. Wang, Fatigue both SiCp Al-6061, in Proceed. of 4th Conf. “Fatigue90”, Honolulu, (1990).
• [26] M.H. Hashimi, S.S.M. Koloor, M.F. Abdul-Hamid, M.N. Tamin, Eng. Frac. Mech. 270, 108589 (2022).