Corrosion Properties of Ca65-xMg17.5Zn17.5+x (x = 0, 2.5, 5) Alloys

• Autorzy: Babilas R. , Wojciechowski P. , Bajorek A. , Sakiewicz P. , Cesarz-Andraczke K.

Identyfikatory

DOI

10.24425/amm.2019.129492

• Języki publikacji: EN

Abstrakty

EN

The aim of the paper is to study the effect of zinc addition on the corrosion behavior of Ca_65-xMg_17.5Zn_17.5+x(x = 0, 2.5, 5 at.%) alloys in simulated physiological fluids at 37°C. The electrochemical measurements allowed to determine a corrosion potential, which showed a positive shift from –1.60 V for Ca₆₅Mg_17.5Zn_17.5 alloy to –1.58 V for Ca₆₀Mg_17.5Zn_22.5 alloy, adequately. The more significant decrease of hydrogen evolution was noticed for Ca₆₀Mg_17.5Zn_22.5 alloy (22.4 ml/cm²) than for Ca_62.5Mg_17.5Zn₂₀ and Ca₆₅Mg_17.5Zn_17.5 samples (29.9 ml/cm² and 46.4 ml/cm²), consequently. The corrosion products after immersion tests in Ringer’s solution during 1 h were identified by X-ray diffraction and X-ray photoelectron spectroscopy as calcium, magnesium oxides, carbonates, hydroxides and calcium hydrate.

Słowa kluczowe

EN

Ca-based alloys; corrosion; hydrogen evolution; X-ray photoelectron spectroscopy

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2019
• Tom: Vol. 64, iss. 3
• Strony: 1033--1040
• Opis fizyczny: Bibliogr. 29 poz., fot., rys., tab.

Twórcy

autor

Babilas R.

• Silesian University of Technology, Institute of Engineering Materials and Biomaterials 18A Konarskiego Str., 44-100 Gliwice, Poland

autor

Wojciechowski P.

• Silesian University of Technology, Institute of Engineering Materials and Biomaterials 18A Konarskiego Str., 44-100 Gliwice, Poland

autor

Bajorek A.

• University of Silesia, A. Chelkowski Institute of Physics, 4 Uniwersytecka Str., 40-007 Katowice, Poland

autor

Sakiewicz P.

• Silesian University of Technology, Institute of Engineering Materials and Biomaterials 18A Konarskiego Str., 44-100 Gliwice, Poland

autor

Cesarz-Andraczke K.

• Silesian University of Technology, Institute of Engineering Materials and Biomaterials 18A Konarskiego Str., 44-100 Gliwice, Poland

Bibliografia

• [1] A. Takeuchi, A. Inoue, Mater. Trans. 46, 2817-2829 (2005), DOI: 10.2320/matertrans.46.2817.
• [2] S. Cai, T. Lei, N. Li, F. Feng, Mater. Sci. Eng. C 32, 2570-2577 (2012), DOI: 10.1016/j.msec.2012.07.042.
• [3] H.R.B. Rad, M. H. Idris, M.R.A. Kadir, S. Farahany, Mater. Des. 33, 88-97 (2012), DOI: 10.1016/j.matdes.2011.06.057.
• [4] J. D. Cao, N. T. Kirkland, K. J. Laws, N. Birbilis, M. Ferry, Acta Biomater. 8, 2375-2383 (2012) , DOI: 10.1016/j.actbio.2012.03.009.
• [5] Y. B. Wang, X. H. Xie, H. F. Li, X. L. Wang, M. Z. Zhao, E. W. Zhang, Y. J. Bai, Y. F. Zheng, L. Qin, Acta Biomater. 7, 3196-3208 (2011), DOI: 10.1016/j.actbio.2011.04.027.
• [6] A. Monfared, A. Ghaee, S. Ebrahimi-Barough, J. Non-Cryst. Solids 489, 71-76 (2018), DOI: 10.1016/j.jnoncrysol.2018.03.031.
• [7] O. Baulin, D. Fabrègue, H. Kato, A. Liens, T. Wada, J. M. Pelletier, J. Non-Cryst. Solids 481, 397-402 (2018), DOI: 10.1016/j.jnoncrysol.2017.11.024.
• [8] M. K. Datta, D. Chou, D. Hong, P. Saha, S. J. Chung, B. Lee, A. Sirinterlikci, M. Ramanatha, A. Roy, P. Kumta, Mater. Sci. Eng. B 176, 1637-1643 (2011), DOI: 10.1016/j.mseb.2011.08.008.
• [9] N. Hua, W. Chen, Q. Wang, Q. Guo, Y. Huang, T. Zhang, J. All. Compd. 745, 111-120 (2018), DOI: 10.1016/j.jall-com.2018.02.138.
• [10] W. Jiao, K. Zhao, X. K. Xi, D. Q. Zhao, M. X. Pan, W. H. Wang, J. Non-Cryst. Solids 356, 1867-1870 (2010), DOI: 10.1016/j.jnoncrysol.2010.07.017.
• [11] W. Jiao, H. F. Li, K. Zhao, H. Y. Bai, Y. B. Wang, Y. F. Zheng, J. Non-Cryst. Solids 357, 3830-3840 (2011), DOI: 10.1016/j.jnoncrysol.2011.08.003.
• [12] K. Zhao, J. F. Li, D. Q. Zhao, M. X. Pan, W. H. Wang, Scripta Mater. 61, 1091-1094 (2009), DOI: 10.1016/j.scriptamat.2009.08.042.
• [13] Y. B. Wang, H. F. Li, Y. F. Zheng, M. Li, Mater. Sci. Eng. C 32, 599-606 (2012), DOI: 10.1016/j.msec.2011.12.018.
• [14] C. L. Qin, Q. F. Hu, Y. Y. Li, Z. F. Wang, W. M. Zhao, D. V. Louzguine-Luzgin, A. Inoue, Mater. Sci. Eng. C 69, 513-521 (2016), DOI: 10.1016/j.msec.2016.07.022.
• [15] O. Baulin, D. Fabrègue, H. Kato, T. Wada, S. Balvay, D. J. Hartmann, J. Pelletier, J. Non-Cryst. Solids 500, 78-83 (2018), DOI: 10.1016/j.jnoncrysol.2018.06.026.
• [16] K. Han, J. Qiang, Y. Wang, P. Häussler, J. All. Compd. 729, 144-149 (2017), DOI: 10.1016/j.jallcom.2017.09.144.
• [17] H. F. Li, X. H. Xie, K. Zhao, Y. B. Wang, Y. F. Zheng, W. H. Wang, L. Qin, Acta Biomater. 9, 8561-8573 (2013), DOI: 10.1016/j.actbio.2013.01.029.
• [18] H. F. Li, K. Zhao, Y. B. Wang, Y. F. Zheng, W. H. Wang, J. Biomed Mater. Res. B Appl. Biomater. 100, 368-377 (2012), DOI: 10.1002/jbm.b.31958.
• [19] R. Nowosielski, A. Bajorek, R. Babilas, J. Non-Cryst. Solids 447, 126-133 (2016), DOI: 10.1016/j.jnoncrysol.2016.05.037.
• [20] L. Hu, B. Y. Liu, F. Ye, B. C. Wei, G. L. Chen, Intermetallics 19, 662-665 (2011), DOI: 10.1016/j.intermet.2011.01.003.
• [21] B. Zberg, P. J. Uggowitzer, J. F. Löffler, Nature Mater. 8, 887 (2009), DOI: 10.1038/nmat2542.
• [22] J. Schroers, G. Kumar, T. M. Hodges, S. Chan, T. R. Kyriakides, JOM 61, 21-29 (2009), DOI: 10.1007/s11837-009-0128-1.
• [23] H. F. Li, Y. F. Zheng, Acta Biomater. 36, 1-20 (2016), DOI: 10.1016/j.actbio.2016.03.047.
• [24] E. S. Park, D. H. Kim, Met. Mater. Int. 11, 19 (2005), DOI: 10.1007/BF03027480.
• [25] O. N. Senkov, J. M. Scott, J. Non-Cryst. Solids 351, 3087-3094 (2005), DOI: 10.1016/j.jnoncrysol.2005.07.022.
• [26] S. Gorsse, G. Orveillon, O. N. Senkov, and D. B. Miracle, Phys. Rev. B 73, 1-33 (2006), DOI: 10.1103/PhysRevB.73.224202.
• [27] H. F. Li, Y. B. Wang, Y. Cheng, Y. F. Zheng, Mater. Let. 64, 1462-1464 (2010), DOI: 10.1016/j.matlet.2010.03.060.
• [28] S. Feliu (Jr), I. Lorente, Appl. Surf. Sci. 347, 736-746 (2015), DOI: 10.1016/j.apsusc.2015.04.189.
• [29] G. Song, Corrosion Prevention of Magnesium Alloys, 1-st ed., Woodhead Publishing limited, Philadelphia, 2013.

Uwagi

EN

1. The work was supported by the Faculty of Mechanical Engineering, Silesian University of Technology statutory grants in 2018 and partially supported by National Science Centre under research project no.: 2013/09/B/ST8/02129.

PL

2. Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2019).