Change of frequency characteristics of a filter using a reactor with smoothly adjustable inductance

• Autorzy: Hudym Vasyl , Kosovska Vira , Al Issa Huthifa A. , Shchur Taras , Miroshnyk Oleksandr , Ziarkowski Slawomir

Identyfikatory

DOI

10.35784/iapgos.5810

Warianty tytułu

PL

Zmiana charakterystyki częstotliwościowej filtra z wykorzystaniem dławika o płynnie regulowanej indukcji

• Języki publikacji: EN

Abstrakty

EN

Experimental studies of the proposed reactor by the authors were carried out through direct measurements of electrical quantities. Structurally, the reactor is designed as a stator of an electric machine with a single pair of poles and a rotor without windings in the form similar to an elliptical shape with flat sides. The magnitude of the inductance varies by rotating the rotor within the range from zero to ninety degrees, where zero degrees corresponds to the alignment of the stator pole axis with the longer axis of the rotor. The effectiveness of using such a reactor to complement passive controlled harmonic current filters is confirmed by corresponding calculations. It is shown that one controlled filter can replace two or more precisely tuned filters capable of absorbing only certain current harmonics.

PL

Badania eksperymentalne proponowanego przez autorów reaktora przeprowadzono poprzez bezpośrednie pomiary wielkości elektrycznych. Konstrukcyjnie reaktor zaprojektowano jako stojan maszyny elektrycznej z pojedynczą parą biegunów i wirnikiem bez uzwojeń w kształcie zbliżonym do kształtu eliptycznego o płaskich bokach. Wielkość indukcyjności zmienia się poprzez obrót wirnika w zakresie od zera do dziewięćdziesięciu stopni, gdzie zero stopni odpowiada zrównaniu osi bieguna stojana z dłuższą osią wirnika. Efektywność zastosowania takiego dławika jako uzupełnienia pasywnych filtrów prądu harmonicznego potwierdzona jest odpowiednimi obliczeniami. Pokazano, że jeden kontrolowany filtr może zastąpić dwa lub więcej precyzyjnie dostrojonych filtrów zdolnych do pochłaniania tylko określonych harmonicznych prądu.

Słowa kluczowe

EN

electric reactor; smooth adjustment of reactor inductance; passive harmonic and interharmonic current filter

PL

dławik elektryczny; płynna regulacja indukcyjności dławika; pasywny filtr harmonicznych i interharmonicznych prądu

• Wydawca: Wydawnictwo Politechniki Lubelskiej
• Czasopismo: Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Środowiska
• Rocznik: 2024
• Tom: T. 14, nr 2
• Strony: 28--33
• Opis fizyczny: Bibliogr. 27 poz., wykr.

Twórcy

autor

Hudym Vasyl

• Lviv National Environmental University, Department of Electrical Engineering Systems, Dubliany, Ukraine

• https://orcid.org/0000-0002-7470-3644

autor

Kosovska Vira

• Lviv Polytechnic National University, Department of Entrepreneurship and Environmental Expertise of Goods, Lviv, Ukraine

• https://orcid.org/0000-0001-6627-1856

autor

Al Issa Huthifa A.

• Al-Balqa Applied University, Department of Electrical and Electronics Engineering, Al Salt, Jordan

• https://orcid.org/0000-0002-0768-8325

autor

Shchur Taras

• Cyclone Manufacturing Inc, Mississauga, Ontario, Canada

• https://orcid.org/0000-0003-0205-032X

autor

Miroshnyk Oleksandr

• State Biotechnological University, Department of Electricity Supply and Energy Management, Kharkiv, Ukraine

• https://orcid.org/0000-0002-6144-7573

autor

Ziarkowski Slawomir

• Spektrum, Kraków, Poland

• https://orcid.org/0009-0009-5253-7225+

Bibliografia

• [1] Al_Issa H., Drechny M., Trrad I., Qawaqzeh M., Kuchanskyy V., Rubanenko O., Kudria S., Vasko P., Miroshnyk O., Shchur T.: Assessment of the Effect of Corona Discharge on Synchronous Generator Self-Excitation. Energies 15(6), 2022, 2024 [https://doi.org/10.3390/en15062024].
• [2] Al-Jufout S., Al-Rousan W., Wang C.: Optimization of induction motor equivalent circuit parameter estimation based on manufacturer’s data. Energies, 11(7), 2018, 1792 [https://doi.org/10.3390/en11071792].
• [3] Arkkio A., Rasilo P., Repo A.-K.: Dynamic electromagnetic torque model and parameter estimation for a deep-bar induction machine. IET Electric Power Applications, 2(3), 2008, 183–192 [https://doi.org/10.1049/iet-epa:20070264].
• [4] Boglietti, A., Cavagnino A., Lazzari M.: Computational algorithms for induction motor equivalent circuit parameter determination. Part II: Skin effect and magnetizing characteristics. IEEE Transactions on Industrial Electronics 58(9), 2011, 3734–3740 [https://doi.org/10.1109/TIE.2010.2084975].
• [5] Diaz A., Saltares R., Rodriguez C., Nunez R., Ortiz-Rivera E., GonzalezLlorente J.: Induction motor equivalent circuit for dynamic simulation. IEEE International Electric Machines and Drives Conference, May 2009, 858– 863 [https://doi.org/10.1109/IEMDC.2009.5075304].
• [6] Gencer C., Gedikpinar M.: A computer-aided educational tool for induction motors. Computer Applications in Engineering Education 20(3), 2012, 503–509 [https://doi.org/10.1002/cae.20418].
• [7] Havrylenko Y., Kholodniak Y., Halko S., Vershkov O., Bondarenko L., Suprun O., Miroshnyk O., Shchur T., Śrutek M., Gackowska M.: Interpolation with Specified Error of a Point Series Belonging to a Monotone Curve. Entropy 23, 2021, 493 [https://doi.org/10.3390/e23050493].
• [8] Havrylenko Y., Kholodniak Y., Halko S., Vershkov O., Miroshnyk O., Suprun O., Dereza O., Shchur T., Śrutek M.: Representation of a Monotone Curve by a Contour with Regular Change in Curvature. Entropy 23, 2021, 923 [https://doi.org/10.3390/e23070923].
• [9] Helonde A., Mankar M.: Identifying three phase induction motor equivalent circuit parameters from nameplate data by different analytical methods. International Journal of Trend in Scientific Research and Development 3(3), 2019, 642–645 [https://doi.org/10.31142/ijtsrd22934].
• [10] Hesari S., Noruziazghandi M., Shojaei A., Neyestani M.: Investigating the intelligent methods of loss minimization in induction motors. Telecommunication Computing Electronics and Control (TELKOMNIKA) 16(3), 2018, 1034–1053 [https://doi.org/10.12928/telkomnika.v16i3.8293].
• [11] Hudym V. I.: Tekhnichni zasoby znyzhennya harmonik v elektropostachal’nykh systemakh. Tekhnichna elektrodynamika 3, 1996, 30–35.
• [12] Hudym V. I., Dovbnia V. I.: Eksperymental’ne doslidzeniya parametriv I kharakterystyk filtrovokho reaktora z dodatkovyu obmotkoyu. Energetitsni ta elektromekhanichni systemy. Visnyk DULP 347, 1998, 11–17.
• [13] Hudym V. I., Jagello A., Mamciarz D.: Elektritsnyy reatstor z plavno rehul’ovanoyu induktyvnistyu. Patent Ukrayiny 118500, 25.01.2019.
• [14] Karaiev O. et al.: Mathematical modelling of the fruit-stone culture seeds calibration process using flat sieves. Acta Technologica Agriculturae 24(3), 2021, 119–123 [https://doi.org/10.2478/ata-2021-0020].
• [15] Khasawneh A. et al.: Optimal Determination Method of the Transposition Steps of An Extra-High Voltage Power Transmission Line. Energies 14, 2021, 6791 [https://doi.org/10.3390/en14206791].
• [16] Maddi Z., Aouzellag D.: Dynamic modelling of induction motor squirrel cage for different shapes of rotor deep bars with estimation of the skin effect. Progress in Electromagnetics Research M 59, 2017, 147–160 [https://doi.org/10.2528/PIERM17060508]
• [17] Miroshnyk O. et al.: Investigation of Smart Grid Operation Modes with Electrical Energy Storage System. Energies 16, 2023, 2638 [https://doi.org/10.3390/en16062638].
• [18] Monjo L., Córcoles F., Pedra J.: Parameter estimation of squirrel‐cage motors with parasitic torques in the torque-slip curve. IET Electric Power Applications 9(5), 2015, 377–387 [https://doi.org/10.1049/iet-epa.2014.0208].
• [19] Nasir B.: An accurate determination of induction machine equivalent circuit components. 1st International Multi-Disciplinary Conference Theme: Sustainable Development and Smart Planning, IMDC-SDSP 2020, Cyperspace, 2020 [https://doi.org/10.4108/eai.28-6-2020.2297941].
• [20] Petrov A. et al.: Adjusted electrical equivalent circuit model of induction motor with broken rotor bars and eccentricity faults. IEEE 11th International Symposium on Diagnostics for Electrical Machines, Power Electronics and Drives, 2017, 58–64 [https://doi.org/10.1109/DEMPED.2017.8062334].
• [21] Pusca R. et al.: Finite element analysis and experimental study of the near-magnetic field for detection of rotor faults in induction motors. Progress in Electromagnetics Research B, 50, 2013, 37–59 [https://doi.org/10.2528/PIERB13021203].
• [22] Qawaqzeh M. Z. et al.: Research of Emergency Modes of Wind Power Plants Using Computer Simulation. Energies 2021, 14, 4780 [https://doi.org/10.3390/en14164780].
• [23] Smith A., Healey R., Williamson S.: A transient induction motor model including saturation and deep bar effect. IEEE Transactions on Energy Conversion 11(1), 1996, 8–15 [https://doi.org/10.1109/60.486570].
• [24] Solar L. et al.: A new exact equivalent circuit of the medium voltage three-phase induction motor. International Journal of Electrical and Computer Engineering 10(6), 2020, 6164–6171 [https://doi.org/10.11591/ijece.v10i6.pp6164-6171].
• [25] Terzioğlu H., Selek M.: Determination of equivalent circuit parameters of induction motors by using heuristic algorithms. Selcuk University Journal of Engineering, Science and Technology 5(2), 2017, 170–182 [https://doi.org/10.15317/Scitech.2017.80].
• [26] Tezcan M. et al.: Investigation of the effects of the equivalent circuit parameters on induction motor torque using three different equivalent circuit models. Matec Web of Conferences 157, 2018 [https://doi.org/10.1051/matecconf/201815701019].
• [27] Zynovkyn V.V., Lyutыy A.P., Balabukha N.S.: Эlektrotekhnolohycheskye rezhymы эnerhoemkykh potrebyteley rezkoperemennыkh nahruzok y ykh vlyyanye na эlektrooborudovanye system эlektrosnabzhenyya. Tekhnichna elektrodynamika 5, 2000, 64–67.