Dependence of mechanical and tribotechnical properties of multilayered TiN/ZrN coatings on deposition

• Autorzy: Bondar O. V. , Stolbovoy V. A. , Kylyshkanov M. K. , Plotnikov S. V. , Erdybaeva N. K. , Piotrowska K. , Czarnacka K. , Karwat C.

Warianty tytułu

PL

Zależność właściwości mechanicznych i trybologicznych wielowarstwowych powłok TiN/ZrN od warunków osadzania

• Języki publikacji: EN

Abstrakty

EN

C-PVD method (vacuum arc deposition of a cathodes) was used for deposition of multilayered coatings, based on TiN/ZrN systems, with different thickness of bilayers. Total thickness of the coatings was 11 – 19 μm, thickness of bilayers varied from 39 to 305 nm for different samples depending on deposition conditions. Microstructure of the coatings, mechanical and tribotechnical properties, and wear resistance were explored. Influence of the bilayer thickness on such properties of the coatings, as hardness, elasticity modulus, wear resistance and wear ratio were explored.

PL

Metoda C-PVD (napylanie próżniowo-łukowe katod) została użyta do osadzania wielowarstwowych powłok, na bazie układów TiN/ZrN o zmiennej grubości pojedynczych warstw. Całkowita grubość powłoki wynosiła 11 – 19 μm, przy czym grubość pojedynczych warstw wahała się od 39 do 305 nm dla różnych próbek zależnie od warunków osadzania. Zbadano mikrostrukturę powłok, właściwości mechaniczne i trybologiczne oraz odporność na zużycie.

Słowa kluczowe

EN

C-PVD method; multilayer; bilayer; hardness; wear

PL

metoda C-PVD; powłoka wielowarstwowa; powłoka dwuwarstwowa; twardość; zużycie

• Wydawca: Wydawnictwo SIGMA-NOT
• Czasopismo: Przegląd Elektrotechniczny
• Rocznik: 2015
• Tom: R. 91, nr 12
• Strony: 233--236
• Opis fizyczny: Bibliogr. 33 poz., rys., tab., wykr.

Twórcy

autor

Bondar O. V.

• Sumy State University, Sumy,Ukraine

autor

Stolbovoy V. A.

• National Scientific Centre “KhFTI”, Kharkiv, Ukraine

autor

Kylyshkanov M. K.

• East- Kazakhstan Technical University, Ust’-Kamenogorsk, Kazakhstan

autor

Plotnikov S. V.

• East- Kazakhstan Technical University, Ust’-Kamenogorsk, Kazakhstan

autor

Erdybaeva N. K.

• East- Kazakhstan Technical University, Ust’-Kamenogorsk, Kazakhstan

autor

Piotrowska K.

• Lublin University of Technology, Mechanical Department, Institute of Technological Systems of Information, Lublin, Poland

autor

Czarnacka K.

• University of Life Sciences in Lublin, Department of Technology Fundamentals, Lublin, Poland

autor

Karwat C.

• Lublin University of Technology, Department of Electrical Devices and High Voltage Technology, Lublin, Poland

Bibliografia

• [1] Madan A., Kim I.-W., Cheng S.-C., Yashar P., Dravid V.P., Barnet S.A., Stabilization of cubic AlN in epitaxial AlN/TiN superlattices, Physical Review Letters 78 (1997), 1743-1749.
• [2] Nordin M., Larsson M., Hogmark S., Mechanical and tribological properties of multilayered PVD TiN/CrN, TiN/MoN, TiN/NbN and TiN/TaN coatings on cemented carbide, Surf. Coat. Technol. 106 (1998), 234-241.
• [3] Lao J., Shao N., Mei F., Li G., Gu M., Mutual promotion effect of crystal growth in TiN/SiC nanomultilayers, Appl. Phys. Lett. 86 (2005), 011902-1–011902-3.
• [4] Soderberg H., Oden M., Larsson T., Hultman L., Molina-Aldareguia J.M., Epitaxial stabilization of cubic-SiNx in TiN/SiNx multilayers, Appl. Phys. Lett. 88, no 19 (2006), 191902-1–191902-3.
• [5] Gassner G., Mayrhofer P.H., Kutschey K., Mitterer C., Kathrei M., Magneli phase formation of PVD Mo-N and W-N coatings, Surf. Coat. Technol. 201 (2006), 3335-3344.
• [6] Abadias G., Michel A., Tromas C., Jaouen C., Dub S.N., Stress, interfacial effects and mechanical properties of nanoscale multilayered coatings, Surf. Coat. Technol. 202 (2007), 844-853.
• [7] Vladescu A., Kiss A., Popescu A., Braic M., Balaceanu M., Braic V. et al., Influence of bilayer period on the characteristics of nanometre-scale ZrN/TiAlN multilayers, J. Nanosci. Nanotechnol. 8 (2008), 717-738.
• [8] Wen M., Meng Q., Hu C., Au T., Su Y., Yu W. et al., Structure and mechanical properties of σ-NbN/SiNx and σ´-NbN/SiNx nano-multilayer films deposited by reactive magnetron sputtering, Surf. Coat. Technol. 203 (2009), 1702-1708.
• [9] Stueber M., Holleck H., Leiste H., Seemann K., Ulrich S., Ziebert C., Concepts for the design of advanced nanoscale PVD multilayer protective thin films, J. Alloy Compd. 483 (2009), 321-354.
• [10] Martev I.N., Dechev D.A., Ivanov N.P., Uzunov Ts. D., Kashchieva E.P., Nanolaminated TiN/Mo2N hard multilayer coatings, J. Phys.: Conference Series. 223, no 1 (2010), 012-019.
• [11] Meng Q., Wen M., Liu P., Zhang K., Zheng W., Correlation between interfacial electronic structure and mechanical properties of ZrN/SiNx films, Mater. Letters 94 (2013), 61-64.
• [12] Zhang Guojun, Fan Tianxiang, Wang Tao, Chen Hailin, Microstructure, mechanical and tribological behavior of MoN/SiNx multilayer coatings prepared by magnetron sputtering, Appl. Surf. Sci. 274 (2013), 231–236.
• [13] Oila A., Bull S.J., Experimental assessment of the elastic properties of thin TiN/AlN superlattice and nano-multilayer coatings, Surf. Coat. Technol. 257 (2014), 87-94.
• [14] Lin C.-K., Hsu C.-H., Cheng Y.-H., Ou K.-L., Lee S.-L., A study on the corrosion and erosion behaviour of electroless nickel and TiAlN/ZrN duplex coatings on ductile iron, Appl. Surf. Sci. 324 (2015), 13-19.
• [15] Puchi-Cabrera E.S., Staia M.H., Lost A., Modelling the composite hardness of multilayer coated system, Thin Solid Films 578 (2015), 53-62.
• [16] Braic M., Balaceanu M., Parau A.C., Dinu M., Vladescu A. Investigation of multilayered TiSiC/NiC protective coatings, Vacuum 120, no A (2015), 60-66.
• [17] Pogrebnjak A.D., Beresnev V.M., Bondar O.V., Abadias G., Chartier P., Postolnyi B.A., Andreev A.A., Sobol O.V., The effect of nanolayer thickness on the structure and properties of multilayer TiN/MoN coatings, Tech. Phys. Lett. 40, no 3 (2014), 215-218.
• [18] Beresnev V.M., Bondar O.V., Postol’nyi B.A., Lisovenko M.A., Abadias G., Chartier P, Kolesnikov D.A., Borisyuk V.N., Mukushev B.A., Zhollybekov B.R., Andreev A.A. Comparison of Tribological Characteristics of Nanostructured TiN, MoN, and TiN/MoN ArcPVD Coatings, J. Frict. Wear. 35, no 5 (2014), 374-382.
• [19] Pogrebnjak A.D., Eyidi D., Abadias G., Bondar O.V., Beresnev V.M., Sobol O.V., Structure and properties of arc evaporated TiN/MoN multilayered systems, Int. J. Refract. Met. Hard Mater. 48 (2015), 222-228.
• [20] Misaelides P., Hatzidimitriou A., Noli F., Pogrebnjak A.D., Tyurin Y.N., Kosionidis S. Preparation, Characterization, and corrosion behavior of protective coatings on stainless steel samples deposited by plasma detonation techniques, Surf. Coat. Tech. 180-181 (2004), 290-296.
• [21] Pogrebnjak A.D., Proskurovskii D.I., Modification of metal surface layer properties using pulsed electron beams, Phys. Stat. Solidi (A) Appl. Res. 145, no1 (1994), 9-49.
• [22] Lavrentiev V.I., Pogrebnjak A.D., High-dose Ion Implantation into Metals, Surf. Coat. Tech. 99 (1-2) (1998), 24-32.
• [23] Pogrebnjak A.D., Bakharev O.G., Pogrebnjak Jr N.A., Tsvintarnaya Yu.V., Shablja V.T., Sandrik R., Zecca A., Certain features of high-dose and intensive implantation of Al ions in iron, Phys. Let. A, 265, no 3, (2000), 225-232.
• [24] Kołtunowicz T.N., Żukowski P., Bondariev V., Fedotova J.A., Fedotov A.K., The effect of annealing on the impedance of (FeCoZr)x(CaF2)(100-x) nanocomposite films produced by the ion-beam sputtering in vacuum, Vacuum (2015) DOI: 10.1016/j.vacuum.2015.01.030
• [25] Svito I.A., Fedotova J.A., Milosavljević M., Zhukowski P., Koltunowicz T.N., Saad A., Kierczynski K., Fedotov A.K., Influence of sputtering atmosphere on hopping conductance in granular nanocomposite (FeCoZr)x(Al2O3)1-x films, J. Alloys Compd. 615, no 1 (2014), S344-S347.
• [26] Koltunowicz T.N., Zhukowski P., Bondariev V., Saad A., Fedotova J.A., Fedotov A.K., Milosavljevic M., Kasiuk J.V., Enhancement of negative capacitance effect in (FeCoZr)x(CaF2)(100-x) nanocomposite films deposited by ion beam sputtering in argon and oxygen atmosphere, J. Alloys Compd. 615, no 1 (2014), S361-S365.
• [27] Bratushka S.N., Opielak M., Liscak S., Structure and properties of Co-Cr coatings after a pulsed jet treatment, Przegl. Elektrotech. 88, no 10A (2012), 314-318.
• [28] Pogrebnjak A.D., Bagdasaryan A.A., Yakushchenko I.V., Beresnev V.M., The structure and properties of high-entropy alloys and nitride coatings based on them, Rus. Chem. Rev. 83, no 11 (2014), 1027-1061.
• [29] Pogrebnjak A.D., Yakushchenko I.V., Bagdasaryan A.A., Bondar O.V., Krause-Rehberg R., Abadias G., Chartier P., Oyoshi K., Takeda Y., Beresnev V.M., Sobol O.V., Microstructure, physical and chemical properties of nanostructured (Ti-Hf-Zr-V-Nb)N coatings under different deposition conditions, Mater. Chem. Phys. 147, no3 (2014), 1079-1091.
• [30] Poliak N.I., Anishchik V.M., Valko N.G., Karwat C., Kozak C., Opielak M., Mechanical properties of Zn-Ni-SiO2 coating deposited under X-ray irradiation, Acta Phys. Pol., A 125, no 6 (2014), 1415-1417.
• [31] Kirik G.V., Kozak C., Opielak M., Protective coatings based on Zr-Ti-Si-N their physical and mechanical properties and phase composition, Przegl. Elektrotech. 88, no10A (2012), 319-321.
• [32] Pogrebnjak A.D., Kravchenko Yu.A., Kislitsyn S.B., Ruzimov Sh.M., Noli F., Misaelides P., Hatzidimitriou A., TiN/Cr/Al2O3 and TiN/Al2O3 hybrid coatings structure features and properties resulting from combined treatment, Surf. Coat. Technol. 201, no 6 (2006), 2621-2632.
• [33] Musil J., Hard nanocomposite coatings: thermal stability, oxidation resistance and toughness, Surf. Coat. Technol. 207 (2012), 50-65.