Mikroskopia sił atomowych jako narzędzie do oceny jakości powierzchni soczewek kontaktowych

• Autorzy: Tomaszewska A.

Identyfikatory

DOI

10.16926/tiib.2016.04.37

Warianty tytułu

EN

Atom force microscopy as a tool for the evaluation of the quality of contact lenses surface

• Języki publikacji: PL

Abstrakty

PL

Na przestrzeni ostatnich lat badania właściwości powierzchni soczewek kontaktowych odgrywają coraz większe znaczenie w kontekście oceny komfortu i bezpieczeństwa ich stosowania. Nieocenionym narzędziem wydaje się być mikroskopia sił atomowych (AFM), umożliwiająca charakteryzację powierzchni soczewek kontaktowych w warunkach zbliżonych do naturalnych. W artykule dokonano przeglądu oryginalnych prac badawczych, odzwierciedlających aktualny stan wiedzy na temat możliwości zastosowań techniki AFM do badania soczewek kontaktowych.

EN

Over the course of the last years the studies of the surface properties of contact lenses have been playing an increasing role in the context of the evaluation of their comfortable and safe application. Atom force microscopy (AFM) seems an invaluable tool, enabling the characterization of contact lenses surface under conditions similar to natural. The following paper provides with the revision of original research reflecting up-to-day state of scientific knowledge of the possibility to apply AFM technique for contact lens studies.

Słowa kluczowe

PL

soczewki kontaktowe; AFM; komfort; bezpieczeństwo

EN

contact lenses; AFM; comfort; safety

• Wydawca: Wydawnictwo Uniwersytetu Humanistyczno-Przyrodniczego im. Jana Długosza w Częstochowie
• Czasopismo: Prace Naukowe Akademii im. Jana Długosza w Częstochowie. Technika, Informatyka, Inżynieria Bezpieczeństwa
• Rocznik: 2016
• Tom: T. 4
• Strony: 455--468
• Opis fizyczny: Bibliogr. 23 poz., tab.

Twórcy

autor

Tomaszewska A.

• Instytut Fizyki, Wydział Matematyczno-Przyrodniczy Akademia im. Jana Długosza w Częstochowie al. Armii Krajowej 13/15, 42-200 Częstochowa

Bibliografia

• [1] Bettuelli M, Trabattoni S., Fagnola M, Tavazzi S., Introzzi L., Farris S., Surface properties and wear performances of siloxane-hydrogel contact lenses, [in:] Journal of Biomedical Materials Research B: Applied Biomaterials, Vol. 101, 2013, p. 1585–1593, DOI: http://dx.doi.org/10.1002/jbm.b.32901.
• [2] Bonnel D.A., Scanning Probe Microscopy and Spectroscopy. Theory, Techniques and Applications. A. John Wiley&Sons, 2001.
• [3] Bruinsma G.M., van der Mei H.C., Busscher H.J., Bacterial adhesion to surface hydrophilic and hydrophobic contact lenses, [in:] Biomaterials, Vol. 22, 2001, p. 3217–3224, DOI: http://dx.doi.org/10.1016/S0142-9612(01)00159-4.
• [4] Caglayan M.O., Atomic force microscopy as a characterization tool for contact lenses: Indentation tests and grain analysis, [in:] International Journal of Polymeric Materials and Polymeric Biomaterials, Vol. 63, 2014, p. 680–684, DOI: http://dx.doi.org/10.1080/00914037.2013.854242.
• [5] Chyasnavichyus M, Young S.L., Tsukruk V.V., Mapping micromechanical properties of soft polymer contact lenses, [in:] Polymer, Vol. 55, 2014, p. 6091–6101, DOI: http://dx.doi.org/10.1016/j.polymer.2014.09.053.
• [6] Gasson A., Morris J.A., The contact lens manual. A practical guide to fitting, Elsevier, 2010.
• [7] Giraldez M.J., Yebra-Pimentel E., Contact Lens surface roughness and bacterial adhesion. Ocular diseases. InTechOpen 2012.
• [8] Giraldez M.J.., Serra C., Lira M., Real Oliviera M. E. C.D., YebraPimental E., Soft contact lens surface profile by atomic force microscopy, Optometry and Vision Science, Vol. 87, 2010, p. 475–481.
• [9] Gonzalez- Meijome J.M., Lopez- Alemany A., Almeida J.B., Parafita M.A., Microscopic observation of unworn siloxane- hydrogel soft contact lenses by atomic force microscopy, [in:] Journal of Biomedical Materials Research Part B: Applied Biomaterials, Vol. 76, 2006, p. 412–418, DOI: http://dx.doi.org/10.1002/jbm.b.30387.
• [10] Gonzalez-Meijome J.M., Lopez- Alemany A., Almeida J.B., Parafita M.A., Surface AFM microscopy of unworn and worn samples of silicone hydrogel contact lenses, Journal of Biomedical Materials Research Part B: Applied Biomaterials, Vol. 88, 2009, p. 75–82, DOI: http://dx.doi.org/10.1002/jbm.b.31153.
• [11] Guryča V., Hobzova R., Pradny M., Sirc J., Michalek J., Surface morphology of contact lenses probed with microscopy techniques, [in:] Contact Lens& Anterior Eye, Vol. 30, 2007, p. 215–222.
• [12] Kim S.H., Marmo Ch., Somorjai G.A., Friction studies of hydrogel contact lenses using AFM: non-crosslinked polymers of low friction at the surface, [in:] Biomaterials, Vol. 22, 2001, p. 3285–3294.
• [13] Kim S.H., Opdahl A., Marmo Ch., Somorjai G.A., AFM and SFG studies of pHEMA-based hydrogel contact lens surafces in saline solution: adhesion, friction, and the presence of non-crosslinked polimer chains at the surface, [in:] Biomaterials, Vol. 23, 2002, p. 1657–1666.
• [14] Koffas T.S., Opdahl A., Marmo Ch., Somorjai G.A., Effect of equilibrium bulk water content on the humidity-dependent surface mechanical properties of hydrophilic contact lenses studied by atomic force microscopy, [in:] Langmuir, Vol. 19, 2003, p. 3453–3460.
• [15] Kopaczyńska M., Mikroskopia sił atomowych (AFM)-biomedyczne zastosowanie pomiarów w nanoskali, Oficyna Wydawnicza Politechniki Wrocławskiej, Wrocław 2010.
• [16] Lira M., Santos L., Azeredo J., Yebra-Pimentel E.,. Real Oliviera M. E. C.D, Comparative Study of silicone-hydrogel contact lenses surfaces before and after wear using atomic force microscopy, [in:] Journal of Biomedical Materials Research B: Applied Biomaterials, Vol. 85, 2008, p. 361–367.
• [17] Lorenz K.O., Kakkassery J., Boree D., Pinto D., Atomic force microscopy and scanning electron microscopy analysis of daily disposable limbal ring contact lenses, [in:] Clinical and Experimental Optometry, Vol. 97, 2014, p. 411–417.
• [18] Maldonado-Codina C, Efron N., Impact of manufacturing technology and material composition on the surface characteristics of hydrogel contact lenses, [in:] Optometry, Vol. 88:6, 2005, p. 396–404.
• [19] Opdahl A., Kim S.H., Koffas T.S., Marmo Ch., Somorjai G.A., Surface mechanical properties of pHEMA contact lenses: Viscoelastic and adhesive property changes on exposure to controlled humidity, [in:] Journal of Biomedical Materials Research, Vol. 67 A, 2003, p. 350–356, DOI: http://dx.doi.org/10.1002/jbm.a.10054.
• [20] Rebeix V., Sommer F., Marcin B., Baude D., Duc T.M., Artificial tear adsorption on soft contact lenses: methods to test surfactant efficacy, [in:] Biomaterials, Vol. 21, 2000, p. 1197–1205, DOI: http://dx.doi.org/10.1016/S0142-9612(99)00221-5.
• [21] Tălu S., Characterization of surface roughness of unworn hydrogel contact lenses at a nanometric scale using methods of modern metrology, [in:] Polymer Engineering and Science, Vol. 53, 2013, p. 2141–2150.
• [22] Tălu S., Stach S., Multifractal characterization of unworn hydrogel contact lenses, [in:] Polymer Engineering and Science, Vol. 54, 2014, p.1066–1080.
• [23] Torrent-Burgues J., Sanz F., AFM in mode Peak Force applied to the study of un-worn contact lenses, [in:] Colloids and Surfaces B: Biointerfaces, Vol. 121, 2014, p. 388–394, DOI: http://dx.doi.org/10.1016/j.colsurfb.2014.06.026.

Uwagi

Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę (zadania 2017).