Effect of Relative Thickness Reduction and Heat Treatment on AMS 5596 Sheet Mechanical Properties After Flow Forming

• Autorzy: Kut S. , Maj P. , Mrugała T.

Identyfikatory

DOI

10.24425/amm.2019.129498

• Języki publikacji: EN

Abstrakty

EN

In the paper the results of experimental research of the process of flow forming of cylindrical drawpieces were presented. The drawpieces were made of the 3.1 mm thick AMS 5596 sheet by drawing process. Tests were performed on two-roller metal spinning machine of a vertical axis Leifeld SFC 800 V500.The main purpose of this research was to determine the relationship between relative thickness reduction and the mechanical properties of tested material. Knowledge of these dependencies is especially useful in designing machines’ components manufactured by flow forming, in the selection of parameters of realization of this technological process as well. Mechanical properties were determined on the basis of uniaxial tensile of the micro samples obtained from the drawpieces: (I) after cold flow forming, (II) after cold flow forming and in-process heat treatment. Obtained results were shown graphically in the diagrams and their analysis was carried out. In addition, the microstructure of the sheet material tested after drawing and flow forming is presented.

Słowa kluczowe

EN

metal spinning; AMS 5596 sheet; flow forming; heat treatment; yield strength

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2019
• Tom: Vol. 64, iss. 3
• Strony: 1087--1094
• Opis fizyczny: Bibliogr. 13 poz., fot., rys., tab., wzory

Twórcy

autor

Kut S.

• Rzeszów University of Technology, Faculty of Mechanical Engineering and Aeronautics, 12 Powstańców Warszawy Str., 35-959 Rzeszów, Poland

autor

Maj P.

• Warsaw University of Technology, Faculty of Materials Science and Engineering, 141 Wołoska Str., 02-507 Warsaw, Poland

autor

Mrugała T.

• Pratt & Withney Rzeszów, 120 Hetmańska Str., 35-078 Rzeszów, Poland

Bibliografia

• [1] C. C. Wong, T. A. Dean, J. Lin, Int. J. Mach. Tool. Manu. 43, 1419 (2003).
• [2] O. Music, J. M. Allwood, K. Kawai, J. Mater. Process. Technol. 210, 3 (2010).
• [3] D. F. Paulonis, J. J. Schirra, Alloy 718 at Pratt & Whitney Historical perspective and future challenges, Superalloys 718, 625, 706 and Various Derivatives ed. By E. A. Loria, TMS (2001).
• [4] R. E. Schafrik, D. D. Ward, J. R. Groh, Application of Alloy 718 in GE Aircraft Engines: Past, present and next five years, Superalloys 718, 625, 706 and Various Derivatives ed. By E. A. Loria, TMS (2001).
• [5] P. Maj, P. Błyskun, S. Kut, B. Romelczyk-Baishya, T. Mrugała, B. Adamczyk, J. Mizera, J. Mater. Process. Technol. 253, 64 (2018).
• [6] M. R. Bache, C. Coleman, M. P. Coleman, V. Gray, C. Boettcher, Fatigue Fract. Eng. Mater. Struct. 41, 2249 (2018).
• [7] M. Sivanandini, S. S. Dhami, B. S. Pabla, International Journal of Scientific & Engineering Research 3 (5), 1 (2012).
• [8] Sukhwinder Singh Jolly and D. S. Bedi, Analysis of Power and Forcesin making of long tubes in Hard-to-work materials in: Proceedings of the World Congress on Engineering 2010 Vol II WCE 2010, June 30-July 2, 2010, London, U.K.ISBN: 978-988-18210-7-2 ISSN: 2078-0958 (Print); ISSN: 2078- 0966 (Online) (2010).
• [9] Z. E. Ma, Optimal angle of attack in tube spinning, J. Mater. Process. Technol. 37, 217 (1993).
• [10] S. C. Chang, C. A. Huang, S. Y. Yu, Y. Chang, W. C. Han, T. S. Shieh, H. C. Chung, H. T. Yao, G. D. Shyu, H. Y. Hou, C. C. Wang, W. S. Wang, J. Mater. Process. Technol. 80-81, 676 (1998).
• [11] J. Yao, M. Murata, J. Mater. Process. Technol. 128, 274 (2002).
• [12] H. R. Molladavoudi, F. Djavanroodi, Int. J. Adv. Manuf. Technol. 52, 949 (2011).
• [13] M. Haghshenas, R. J. Klassen, Materials Science & Engineering A 641, 249 (2015).

Uwagi

EN

1. Project co-financed by the European Regional Development Fund under the Operational Programme Innovative Economy and the National Centre for Research and Development Poland (NCBR ) – Grant No. INNOLOT/I/9/NCBR/2013 (2013-2018) – CASELOT.

PL

2. Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2019).