A review and analysis of the historical development of machine tools into complex intelligent mechatronic systems

• Autorzy: Guergov S.

Identyfikatory

DOI

10.5604/01.3001.0010.8828

• Języki publikacji: EN

Abstrakty

EN

This paper presents an analytical review of the development of machine tools (MT) into complex mechatronic systems. The basic periods, inventions and achievements in their historical development are marked which are represented in seven stages depending on the most essential changes for each period. Other fundamental and important discoveries and inventions are given along with the immediate achievements and changes which have affected the development of MT. A diagram of the changes in the relationship between the MT mechanical, electronic and software components is presented depending on the rate of development of the different stages as well as an opinion is shared on the conceptual schema of the environment of a future intelligent MT.

Słowa kluczowe

EN

intelligence; machine tool; mechatronic system; historical perspective

• Wydawca: Wydawnictwo Wrocławskiej Rady FSNT NOT
• Czasopismo: Journal of Machine Engineering
• Rocznik: 2018
• Tom: Vol. 18, No. 1
• Strony: 107--119
• Opis fizyczny: Bibliogr. 41 poz., rys.

Twórcy

autor

Guergov S.

• Technical University – Sofia, Bulgaria

Bibliografia

• [1] MOMMERTZ K.H., ALLWANG K., 1981, Bohren, Drehen und Fräsen. Geschichte der Werkzeugmaschinen, Rowohlt, ISBN-10: 3499177048.
• [2] http://rec.gerodot.ru/athens_nat/akm.htm
• [3] http://www.rudibg.com/products.aspx?id=1
• [4] SATO et al., 2000, High speed and high productive drilling by intelligent machine tools – Integration of the cutting conditions planning and adaptive control for drilling, Proc. of the Japan - USA Symposium on Flexible Automation, 13061.
• [5] GILBERT K.R., 1966, Science Museum, Catalogue of Exhibits with Historical Introduction –The machine tool collection, Her Majesty’s Stationery Office London.
• [6] http://turner.narod.ru/dir1/histori.htm
• [7] ENGELMAN R., 2016, The second industrial revolution 1870-1914, http://ushistoryscene.com/article/second-industrial-revolution/
• [8] MOKYR J., STROTZ R.H., 2003, The second industrial revolution 1870-1914, Northwestern University. Sheridan Rd. Evanston IL 60208.
• [9] WOODBURY R., 1959, History of the gear-cutting machine: a historical study in geometry and machines, Technology Press, Massachusetts Institute of Technology, Technology & Engineering.
• [10] https://www.fold3.com/document/115488562/
• [11] http://202.114.32.200:8080/courseware/208405/20840511/context/Text/EC14_3.htm
• [12] ARNOLD H., 2001, The recent history of the machine tool industry and the effects of technological change, University of Munich, Institute for Innovation Research and Technology Management.
• [13] Thermal deformation in machine tools/ed. by Yoshimi Ito, 2010 e-library, e-book, http://mediareading. host/www_zukunftthueringen_de/thermal-deformation-in-machine-tools.pdf, Retrieved 2017-11-28.
• [14] http://www.iki.bas.bg/econ.studies/1998_2/2Chobanova.pdf
• [15] PROSPECTUS of the Agency of Industrial Science & Technology MITI, FMSC National R&D program Flexible Manufacturing System Complex Provided with Laser – Tsukuba Test Plant, Tokyo, Japan.
• [16] YOSHIKAWA H., 1984, Flexible manufacturing systems in Japan, IFAC, Budapest, Hungary, https://ac.els-cdn.com/S1474667017613314/1-s2.0-S1474667017613314-main.pdf?_tid=53b1bce0-df21-11e7-8e83-00000aacb 35e&acdnat=1513072169_40281c0f8f075019bb5eda8d43863793
• [17] ABERNATHY W. J., 1978, The productivity dilemma: Roadblock to innovation in the automobile industry, The Johns Hopkins, University Press. Baltimore, MD.
• [18] HAYES R.H., WHEELWRIGHT S.C., 1984, Restoring our competitive edge: Competing through manufacturing, Wiley. New York, NY.
• [19] WHEELWRIGHT S., 1981, Japan-where operations really are strategic, Harvard Business Review, 59.
• [20] https://www.industry.siemens.com/topics/global/en/magazines/special-editions/Documents/motionworld_50%20J ahre_SINUMERIK-en.pdf
• [21] KAKINO et al., 1998, High speed and high productive drilling by intelligent machine tools, Proc. of the Japan - USA Symposium on Flexible Automation, 1, 285-289.
• [22] SATO T., et al., 2002, Proposal of the extended system framework of intelligent machine tool, Japan-USA Symposium on Flexible Automation, Hiroshima, Japan, July 14-19.
• [23] THE ECONOMIST, 2013, 3D printing: 3D printing scales up.
• [24] JEDRZEJEWSKI J., KWASNY W., 2015, Development of machine tool operational properties, Journal of Machine Tools, 15/1, 5-24.
• [25] KOREN Y., HEISEL U., JOVANE F., MORIWAKI T., PRITSCHOW G., ULSOY G., VAN BRUSSEL H., 1999, Reconfigurable manufacturing systems, Annals of the CIRP, 48/2, 527–540.
• [26] MEHRABI M.,A.G., ULSOY Y., KOREN P., HEYTLER, 2005, Trends and perspectives in flexible and reconfigurable manufacturing systems, Department of Mechanical Engineering and Applied Machanics, University of Michigan, MI 48109-2125.
• [27] SETHI A., SETHI S., 1990, Flexibility in manufacturing: A survey, The International Journal of FMS, Kluwer Academic Publishers, Boston, 289-328.
• [28] THARUMARAJAH A., WELLS A.J., NEMES L., 2017, Comparison of emerging manufacturing concepts, CSIRO Manufacturing Science & Technology, Preston, Victoria, Australia.
• [29] WINIARSKI Z., KOWAL Z., JEDRZEJEWSKI J, KWASNY W, 2017, Precise modelling of machine tool drives with ball screw thermal behaviour, Journal of Machine Tools, 17/1, 31-45.
• [30] https://www.indextraub.com/
• [31] http://americanmachinist.com/enterprise-software/mes-increases-machine-availability-mazak. Retrieved 2017-02-28
• [32] https://www.mazakusa.com/machines/technology/smooth-technology/
• [33] http://smartmanufacturing.com/process/#phase1
• [34] GOPALAKRISHNAN V., FEDEWA D., MEHRABI M.G., KOTA S., ORLANDEA N., 2002, Parallel structures and their applications in reconfigurable machining systems, Journal of Manufacturing Science and Engineering, 124, 483-485.
• [35] http://machinebuilding-bulgaria.com/article/1792-mazak-predstavi-novi-hibridni-metaloobrabotvashti-mashini
• [36] SINGLETON D., 2013, History of Manufacturing Software, ERP Analyst, Software Advice.
• [37] World Machine Tool Survey, 2016, gardnerweb.com/research|513 527 8800, http://www.gardnerweb.com/cdn/ cms/2016%20WMTS%20Report.pdf
• [38] BAMBACH M., 2016, Recent trends in metal forming: from process simulation and microstructure control in classical forming processes to hybrid combinations between forming and additive manufacturing, Journal of Machine Engineering, 16/ 2, 5-17.
• [39] UHLMANN E, HOHWIELER E, GEISERT C., 2017, Intelligent production systems in the era of Industrie 4.0 – changing mindsets and business models, Journal of Machine Engineering, 17/ 2, 5-23.
• [40] ITO Y, 2017, Layout design for flexible machining systems in FCIPS and convertibility to CPS module in smart factory, Journal of Machine Tools, 17/4, 5-28.
• [41] UHLMANN E., HOHWIELER E., GEISERT C., 2017, Intelligent production systems in the era of Industry 4.0 – changing mindsets and business models, Journal of Machine Tools, 17/2, 5-24.

Uwagi

Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2018).