Tribological Examination of Different Steel Materials after Special Heat Treatment and Salt Bath Nitriding

• Autorzy: Opaliński M. , Mazuro P. , Klasik A. , Rostek E.

Identyfikatory

DOI

10.1515/amm-2016-0303

• Języki publikacji: EN

Abstrakty

EN

The main aim of the presented research was examination of new tribological pairs made of different types of steel. Materials of disc probes were submitted to unusual heat treatment processes and salt bath nitriding. The research is focused on the friction coefficients and mass losses of the material probes. Based on the results it was noticed that the best wear resistant pair was bearing steel 100Cr6 coupled with high speed steel S705. The lowest friction coefficient appeared for the pair bearing steel 100Cr6 and maraging steel C350.

Słowa kluczowe

EN

tribology; mechanical properties; steel alloys; friction coefficient

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2016
• Tom: Vol. 61, iss. 4
• Strony: 1881--1888
• Opis fizyczny: Bibliogr. 14 poz., rys., tab., wykr., wzory

Twórcy

autor

Opaliński M.

• Warsaw University of Technology, Institute of Heat Engineering, 21/25 Nowowiejska Str., 00-665 Warszawa, Poland

autor

Mazuro P.

• Warsaw University of Technology, Institute of Heat Engineering, 21/25 Nowowiejska Str., 00-665 Warszawa, Poland

autor

Klasik A.

• Motor Transport Institute, 80 Jagielońska Str., 03-301 Warszawa, Poland

autor

Rostek E.

• Motor Transport Institute, 80 Jagielońska Str., 03-301 Warszawa, Poland

Bibliografia

• [1] M. Szczeciński, P. Mazuro, W. Skrobek, Scavenging process CFD computations in a two stroke opposed-piston engine, PTNSS–2015–3404, 563 (2015).
• [2] J-P. Pirault, M. Flint, Opposed piston engines: evolution, use, and future applications, SAE International, p6, Warrendale 2010.
• [3] W. Kozaczewski, Konstrukcja grupy tłokowo-cylindrowej silników spalinowych, WKiŁ, 7-19, Warszawa 2004.
• [4] J. Włodarski, Tłokowe silniki spalinowe – procesy trybologiczne, WKiŁ, 29, Warszawa 1982.
• [5] Instrukcja obsługi T-11 Tester typu tarcza-trzpień, Instytut Technologii Eksploatacji, Państwowy Instytut Badawczy, Radom 2008.
• [6] K. Niewiarowski, Tłokowe silniki spalinowe, WKiŁ, 345-346, Warszawa 1968.
• [7] M. Hebda, Trybologia, WKiŁ, 144, Warszawa 1980.
• [8] C.M. Taylor, Engine Tribology, Tribology series 26, Elsevier, 213, Amsterdam 1993.
• [9] M. Wieczorowski, Wykorzystanie analizy topograficznej w pomiarach nierówności powierzchni, Wydawnictwo Politechniki Poznańskiej, 429, 2009.
• [10] J. Petzing, J. Coupland, R. Leach, A national measurement good practice guide no.116, NPL Middlesex 2010.
• [11] http://www.hartowniats.pl.
• [12] http://www.bohler.pl.
• [13] http://www.uddeholm.com.
• [14] P. Andersson, J. Tamminenm, C-K. Sandström, Piston ring tribology. A literature survey. VTT Tiedotteita – Research Notes 2178. 82, Espoo 2002.

Uwagi

EN

Presented work is a part of the research which received funding from the Polish-Norwegian Research Program operated by the National Centre of Research and Development under the Norwegian Financial Mechanism 2009-20014 in the frame of Project Contract No Pol-Nor/199058/94