FMR study of samples obtained by nitriding and nitrides reduction of nanocrystalline iron

• Autorzy: Typek J. , Guskos N. , Zolnierkiewicz G. , Guskos A. , Kielbasa K. , Pelka R. , Arabczyk W.

Identyfikatory

DOI

10.1515/msp-2016-0014

• Języki publikacji: EN

Abstrakty

EN

Samples obtained by nitriding of promoted nanocrystalline iron and the nitrides reduction at various nitriding potential in terms of thermodynamic parameters were investigated by electron paramagnetic resonance/ferromagnetic resonance (EPR/FMR) method at room temperature. Experimental FMR spectra were fitted by the Dysonian-type resonance lines arising from the presence of different Fe–N phases. The obtained FMR parameters allowed us to identify the component phases and to determine their magnetic properties. In general, the proposed simple method of decomposition of the FMR spectra produced results on the phase content in investigated samples that were consistent with XRD measurements and additionally, magnetic characteristics of the studied nanomagnets.

Słowa kluczowe

EN

FMR; nitriding; Fe–N-phases; magnetic properties

• Wydawca: De Gruyter
• Czasopismo: Materials Science Poland
• Rocznik: 2016
• Tom: Vol. 34, No. 1
• Strony: 6--12
• Opis fizyczny: Bibliogr. 33 poz., rys., tab.

Twórcy

autor

Typek J.

• Institute of Physics, West Pomeranian University of Technology, al.Piastow 48, 70-311,Poland

autor

Guskos N.

• Institute of Physics, West Pomeranian University of Technology, al.Piastow 48, 70-311,Poland

autor

Zolnierkiewicz G.

• Institute of Physics, West Pomeranian University of Technology, al.Piastow 48, 70-311,Poland

autor

Guskos A.

• Institute of Physics, West Pomeranian University of Technology, al.Piastow 48, 70-311,Poland

autor

Kielbasa K.

• Institute of Inorganic Chemical Technology and Environmental Engineering, West Pomeranian University of Technology, Pulaskiego 10, 70-322 Szczecin, Poland

autor

Pelka R.

• Institute of Inorganic Chemical Technology and Environmental Engineering, West Pomeranian University of Technology, Pulaskiego 10, 70-322 Szczecin, Poland

autor

Arabczyk W.

• Institute of Inorganic Chemical Technology and Environmental Engineering, West Pomeranian University of Technology, Pulaskiego 10, 70-322 Szczecin, Poland

Bibliografia

• [1] Xi Y.T., Liu D.X., Han D., Surf. Coat. Tech., 202 (2008), 2577.
• [2] Lampman S., Introduction to Surface Hardening of Steels, ASM Handbook Vol. 4, ASM International, 1994, p. 607.
• [3] O’Brien J.M., Plasma (Ion) Nitriding of Steels, ASM Handbook Vol. 4, ASM International, 1995, p. 944.
• [4] Fontalvo G.A., Mitterer C., Reithofer G., Surf. Eng., 20 (2004), 474.
• [5] Alphonsa I., Chainani A., Raole P.M., Ganguli B., John P.I., Surf. Coat. Tech., 150 (2002), 263.
• [6] Zhan Q., Yu R., He L.L., Li D.X., Thin Solid Films, 411 (2002), 225.
• [7] Iwatsubo S., Naoe M., Vacuum, 66 (2002), 251.
• [8] Abdellateef M.A., Heiden C., Lemke H., Eihossary F.M., Baerner K., J. Magn. Magn. Mater., 256 (2003), 214.
• [9] Zheng W.T., Sun C.Q., Prog. Solid State Chem., 34 (2006), 1.
• [10] Wang L.L., Wang X., Zheng W.T., Ma N., Li H.B., Guan Q.F., Jin D.H., Zong Z.G., J. Alloy. Compd., 443 (2007), 43.
• [11] Kielbasa K., Pelka R., Arabczyk W., J. Phys. Chem. A, 114 (2010), 4531.
• [12] Pelka R., Kielbasa K., Arabczyk W., Cent. Eur.J. Chem., 9 (2011), 240.
• [13 ]Moszynski D., Moszynska I., Arabczyk W., Mater. Lett., 78 (2012), 32.
• [14] Utsushikawa Y., Niizuma K., J. Alloy. Compd., 222 (1995), 188.
• [15] Coey J.M.D., Smith P.A.I., J. Magn. Magn. Mater., 200 (1999), 405.
• [16] Costa-Kramer J.L., Borsa D.M., Garciamartin J.M., Martin-Gonzalez M.S., Boerma D.O., Briones F., Phys. Rev. B, 69 (2004), 144402.
• [17] Helminiak A., Arabczyk W., Zolnierkiewicz G., Guskos N., Typek J., Rev. Adv. Mat. Sci., 29 (2011), 166.
• [18] Narkiewicz U., Guskos N., Arabczyk W., Typek J., Bodziony T., Konicki W., Gąsiorek G., Kucharewicz I., Anagnostakis E.A., Carbon, 42 (2004), 1127.
• [19] Guskos N., Anagnostakis E.A., Gasiorek G., Typek J., Bodzionny T., Narkiewicz U., Arabczyk W., Konicki W., Mol. Phys. Rep., 39 (2004), 58.
• [20] Guskos N., Typek J., Narkiewicz U., Maryniak M., Aidinis K., Rev. Adv. Mater. Sci., 8 (2004), 10.
• [21] Guskos N., Typek J., Maryniak M., Narkiewicz U., Kucharewicz I., Wrobel R., Mater. Sci.-Poland, 23 (2005), 1001.
• [22] Bodziony T., Guskos N., Typek J., Roslaniec Z., Narkiewicz U., Maryniak M., Mater. Sci.-Poland, 23 (2005), 1055.
• [23] Narkiewicz U., Arabczyk W., PeŁech I., Guskos N., Typek J., Maryniak M., Wozniak M.J., Matysiak H., Kurzydlowski K.J., Mater. Sci.-Poland, 24 (2006), 1067.
• [24] Guskos N., Maryniak M., Typek J., Pełech I., Narkiewicz U., Rosłaniec Z., Kwiatkowska M., Solid State Phenom., 128 (2007), 213.
• [25] Lendzion-Bieluń Z., Jędrzejewski R., Pol.J. Chem. Technol., 15 (2013), 27.
• [26] Lendzion-Bieluń Z., Arabczyk W., Figurski M., Appl. Catal. B, 227 (2002), 255.
• [27] Moszynska I., Moszynski D., Arabczyk W., Przem. Chem., 88 (2009), 526.
• [28] Pelka R., Arabczyk W., J. Nanomater., 2013 (2013), 645050.
• [29] Pelka R., Kielbasa K., Arabczyk W., Curr. Nanosci., 9 (2013), 711.
• [30] Sukhov A., Usadel K.D., Nowak U., J. Magn. Magn. Mater., 320 (2008), 31.
• [31] Feher G., Kip A.F., Phys. Rev., 98 (1955), 337.
• [32] Veinger A.I., Zabrodskii A.G., Tsinek T.V., Goloshchapov S.I., Semenikhin P.V., Tech. Phys., 58 (2013), 1806.
• [33] Typek J., Wardal K., Zolnierkiewicz G., Guskos N., Sibera D., Narkiewicz U., J. Magn. Magn. Mater., 361 (2014), 18.

Uwagi

Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę.