Computational model of the basic efficiency parameters of the bucket wheel excavator working in a block with a vertical obstacle

• Autorzy: Nowak-Szpak Anna

Identyfikatory

DOI

10.37190/msc212814

• Języki publikacji: EN

Abstrakty

EN

The article presents the results of the numerical experiments designed to determine the effect of obstacles in the form of the drainage wells/piezometer on the basic efficiency parameters of the excavator’s work. Simulation research on built model included defining the basic parameters of the excavator working in the front block on stabile front (as a comparison) and on the non-stable front for two variants of drainage infrastructure exposing.

Słowa kluczowe

EN

bucket wheel excavator; efficiency; computational model; open cast mining

• Wydawca: Wydział Geoinżynierii, Górnictwa i Geologii, Instytut Górnictwa Politechniki Wrocławskiej
• Czasopismo: Mining Science
• Rocznik: 2021
• Tom: Vol. 28
• Strony: 189--201
• Opis fizyczny: Bibliogr. 22 poz., rys., tab.

Twórcy

autor

Nowak-Szpak Anna

• Faculty of Geoengineering, Mining and Geology, Wroclaw University of Science and Technology, Department of Mining and Geodesy, Na Grobli 15, 50-421 Wroclaw, Poland

• https://orcid.org/0000-0001-6102-5277

Bibliografia

• BEBIC M., RISTIĆ L., 2018, Speed Controlled Belt Conveyors: Drives and Mechanical Considerations, Advances in Electrical and Computer Engineering, 18 (1), January, 51–60, DOI: 10.4316/AECE.2018.01007.
• BRÎNAŞ I., ANDRAŞ A., RADU S.M., POPESCU F.D., ANDRAŞ I., MARC B.I., CIOCLU A.R., 2021, Determination of the Bucket Wheel Drive Power by Computer Modeling Based on Specific Energy Consumption and Cutting Geometry, Energies, 14, 3892; https://doi.org/10.3390/en14133892
• DANIČIĆ D., LAZAREVIĆ Ž., MITROVIĆ S., 2016, Proactive Approach as Contribution to System of Preventing Fatigue Failures of Bucket Wheel Excavator, Conference: 13th International Symposium Continuous Surface Mining ISCSM 2016At, Belgrade, Serbia.
• GALETAKIS M., ROUMPOS C.A., 2015, Multi-Objective Response Surface Analysis for the Determination of the Optimal Cut-Off Quality and Minimum Thickness for Selective Mining of Multiple-Layered Lignite Deposits, Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, Vol. 37, No. 4, pp. 428–439.
• GŁADYSIEWICZ L., KRÓL R., KISIELEWSKI W., KASZUBA D., 2017, Experimental determination of belt conveyors artificial friction coefficient, Acta Montanistica Slovaca, 22 (2), 206–214.
• ILIĆ S., 2020, Calculation the capacity of bucket wheel excavator the selective mining of overburden, Underground Mining Engineering, 36, 19–28, DOI: 10.5937/podrad2036019I.
• KRESSNER M., ş.a., 2006, Cutting Resistance an Cutting Tool Design on Bucket Wheel Excavators. Proceedings of ISCSM 2006, 8TH International Symposium, Continuous Surface Mining, Aachen, September 24th–27th.
• KAWALEC W., KRÓL R., 2021, Generating of Electric Energy by a Declined Overburden Conveyors in a Continous Surface Mine, Energies, 14, 4030.
• KAWALEC W., SUCHORAB N., KONIECZNA-FUŁAWKA M., KRÓL R., 2020, Specific energy consumption of a belt conveyor system in a continuous surface mine, Energies, 13 (19), DOI: 10.3390/en13195214.
• KOŁKIEWICZ W., SZATAN M., 1993, Strumień urobku jako nośnik informacji o jakości procesu roboczego odkrywkowego układu technologicznego typu KTZ, Górnictwo Odkrywkowe, pp. 3–15.
• NAN M.S., ANDRAŞ I., JULA D., 2008, Study of the Working Regime of the Bucket Wheel Excavators in the Conditions of Romanian Open Pit Lignite Mines. [In:] 8th Wseas International Conference On Simulation, Modelling and Optimization (SMO ’08), Santander, 2008.
• NOWAK-SZPAK A., 2017, Systemy zdalnego kierowania ruchem maszyn górniczych w kopalniach odkrywkowych – propozycja identyfikacyjno-symulacyjnego programu projektowania pracy koparki kołowej, Górnictwo Odkrywkowe, 2017, LVIII.6, pp. 4–13.
• PACTWA, K., WOŹNIAK, J., 2015, The meaning of geostatistical research in the light of the concept of assessing values of lignite deposits. Mining Science 22 no. 2 105-112. doi:10.5277/ms150208.
• POLTEGOR-INSTYTUT, 2013, https://www.igo.wroc.pl/technologia-wyznaczania-parametrow-pracykoparek-kolowych-w-zmiennych-warunkach-geologicznych-i-geometrycznych-zabierki/
• RAAZ V., 2002, Assessment of the Digging Force and Optimum Selection of the Mechanical and Operational Parameters of Bucket Wheel Excavators for Mining of Overburden, Coal and Partings, Krupp Fördertechnik GmbH, Essen, Germany.
• RAŠIĆ N., BEBIĆ M., RISTIĆ L., MIHAILOVIĆ I., JEVTIĆ D., ŠTATKIĆ S., 2016, Improved efficiency of bucket wheel excavator operation with advances in the control algorithm. [In:] Proc. 4th International Symposium on Environmental Friendly Energies and Applications (EFEA), September, pp. 1–6, DOI: 10.1109/EFEA.2016.7748809.
• STOBIECKI Z., PIERZCHAŁA K., 2018, Metody oceny stanu technicznego obiektów odwodnienia wgłębnego w KWB Bełchatów, Górnictwo Odkrywkowe, LIX, 2, pp. 28–33.
• SUCHORAB, N. 2019. Specific energy consumption – the comparison of belt conveyors. Mining Science 26. 263-274. DOI:10.37190/msc192619.
• SZCZEPIŃSKI J., 2018, ,Uwarunkowania hydrogeologiczne wydobycia kopalin w kopalniach odkrywkowych węgla brunatnego, Górnictwo Odkrywkowe, LIX, 2, pp. 22–26.
• URAL S., 2001, The Effects of Operational Parameters on the Output Efficiency of the Bucket Wheel Excavator. [In:] Proc. 17th Int. Mining Congress and Exhibition of Turkey-Imcet, Ankara, Turkey, pp. 663–669.
• WYGODA M., NOWAK-SZPAK A., SZEPIETOWSKI S.W., BEDNARCZYK Z., CIOCH W., 2014, Mechatroniczne zabezpieczenia i sterowanie maszyn w rezultatach realizacji projektu rozwojowego. Mechatroniczny system sterowania, diagnostyki i zabezpieczeń w maszynach górnictwa odkrywkowego. Górnictwo Odkrywkowe, R. LV, 1, pp. 67–77.
• ZHAO-XUE C., YAN-LONG C., 2014, Determination and analysis of the theoretical production of a bucket wheel excavator, Arch. Min. Sci., 59 (1), 283–291.