Changes In Properties of Hot-Dip Zinc Coating Resulting from Heat Treatment

• Autorzy: Jędrzejczyk D. , Szatkowska E.

Identyfikatory

DOI

10.24425/amm.2019.126239

• Języki publikacji: EN

Abstrakty

EN

This paper analyses the heat treatment of the hot-dip zinc coating deposited on both cast iron and steel. The aim of research is to increase coating hardness and wear resistance without decreasing its anticorrosion properties. Hot-dip zinc coating was deposited in industrial conditions (acc. PN-EN ISO 10684) on disc shape samples and bolts M12x60. The achieved results were assessed on the basis of microscopic observation (with the use of an optical and scanning microscope), EDS (point and linear) analysis and micro-hardness measurements. It was discovered that the heat treatment of zinc coating results in an increase in hardness which is caused by the corresponding changes in microstructure.

Słowa kluczowe

EN

hot-dip zinc galvanizing; heat treatment; coating hardness

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2019
• Tom: Vol. 64, iss. 1
• Strony: 201--206
• Opis fizyczny: Bibliogr. 20 poz., fot., rys., tab.

Twórcy

autor

Jędrzejczyk D.

• University of Bielsko-Biala, 43-309 Bielsko-Biała, 2 Willowa Str., Poland

autor

Szatkowska E.

• University of Bielsko-Biala, 43-309 Bielsko-Biała, 2 Willowa Str., Poland
• Bosmal Automotive Research and Development Institute Ltd, 93 Sarni Stok Str., Bielsko-Biala, Poland

Bibliografia

• [1] Data of the International Lead and Zinc Study Group, reports for: 2008, 2015.
• [2] O. Kubaschewski, Iron-Binary Phase Diagrams, Springer-Verlag, Berlin (1982).
• [3] P. B. Burton, P. Perrot, Phase Diagram of Binary Iron Alloys. American Society for Metals, Metal Park. OH (1993).
• [4] T. B. Massalski, Binary Alloy Phase Diagrams. ASM International (1990).
• [5] A. R. Marder, Prog. Mater. Sci. 45 (3), 191-271 (2000).
• [6] P. Pokorný, J. Cinert, Z. Pala, Materials and technology 50 (2), 253-256 (2016).
• [7] A. Bohran-Tavakoli, Zeitschrift für Metallkunde 75, 350-355 (1984).
• [8] C. E. Jordan, A. R. Marder, Metallurgical and Materials Transactions 25A, 937-947 (1994).
• [9] C. R. Xavier, U. R. Seixas, P. R. Rios, ISIJ International 36, 1316-1317 (1996).
• [10] W. Wołczyński, B. Kucharska, G. Garzeł, A. Sypień, Z. Pogoda, T. Okane, Arch. Metall. Mater. 60 (1), 199-207 (2015).
• [11] W. Wołczyński, Z. Pogoda, G. Garzeł, B. Kucharska, A. Sypień, T. Okane, Arch. Metall. Mater. 59 (3), 1223-1233 (2014).
• [12] W. Wołczyński, Z. Pogoda, G. Garzeł, B. Kucharska, A. Sypień, T. Okane, Arch. Metall. Mater. 59 (4), 1393-1404 (2014).
• [13] P. Perrot, J. C. Tissier, J. Y. Dauphin, Zeitschrift für Metallkunde 83, 786-790 (1992).
• [14] D. Kopyciński, E. Guzik, Inżynieria Materiałowa 29 (6), 780-783 (2008).
• [15] D. W. Evans, 2014 Coal Operators’ Conference, Northfields Ave, Australia, 177-185 (2014).
• [16] B. Sonntag, K. Thom, K. N. Dambrowsky, B. Dingwerth, Galvanotechnik 7, 1499-1513 (2009).
• [17] O. Fayomi, A. Popoola, International Journal of Electrochemical Science 7, 6555-6570 (2012).
• [18] L. Szabadi, G. Kalácska, L. Pék, I. Pálinkás, Sustainable Construction and Design, 82-91 (2011).
• [19] M. Azadeh, M. R. Toroghinejad, ISIJ International 49 (12), 1945-1951 (2009).
• [20] F. Fang, X. F. Du, Y. M. Chen, IOP Conf. Series: Materials Science and Engineering 292 Materials Science and Engineering 292, 1-4 (2017).

Uwagi

PL

Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2019).