Modelling of Multi-Bolted Systems at the Pretension Stage, Part 1, Mechanical Characteristics of the Contact between the Joined Elements

• Autorzy: Grzejda Rafał , Kwiatkowski Konrad

Identyfikatory

DOI

10.24425/amm.2024.149802

• Języki publikacji: EN

Abstrakty

EN

The subject of the paper is the modelling of multi-bolted connections that are at the pretensioning stage. Taking a systematic approach to the modelling issue, the connection was treated as a composite of four subsystems: a bolt set, a pair of joined elements and a contact layer between them. The first part of the paper describes experimental studies to determine the contact stiffness of a pair of elements separated from an exemplary asymmetric multi-bolted connection. The normal loading and unloading direction of the contact joint was considered. The tests were performed with the use of an INSTRON 8850 servo-hydraulic testing machine equipped with an extensometer. A normal stiffness characteristic in the form of an exponential function was proposed for the tested contact joint. It will be applied in the second part of the paper, in which finite element modelling of the multi-bolted connection will be presented.

Słowa kluczowe

EN

multi-bolted connection; systemic approach; contact joint; pretension stage; normal direction

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2024
• Tom: Vol. 69, iss. 2
• Strony: 717--721
• Opis fizyczny: Bibliogr. 42 poz., fot., rys.

Twórcy

autor

Grzejda Rafał

• West Pomeranian University of Technology in Szczecin, Faculty of Mechanical Engineering and Mechatronics, 19 Piastów Av., 70-310 Szczecin, Poland

• https://orcid.org/0000-0002-8323-1335

autor

Kwiatkowski Konrad

• West Pomeranian University of Technology in Szczecin, Faculty of Mechanical Engineering and Mechatronics, 19 Piastów Av., 70-310 Szczecin, Poland

• https://orcid.org/0000-0002-9013-0719

Bibliografia

• [1] L. Rakotondrainibe, J. Desai, P. Orval, G. Allaire, Eur. J. Mech. / A Solids 93, 104499 (2022).
• [2] P. Baranowski, K. Damaziak, J. Małachowski, Eksploat. Niezawodn. - Maint. Reliab. 15 (4), 337-342 (2013).
• [3] E. Bachtiak-Radka, S. Dudzińska, D. Grochała, S. Berczyński, W. Olszak, Surf. Topogr.: Metrol. Prop. 5 (1), 015001 (2017).
• [4] E. Bachtiak-Radka, S. Dudzińska, D. Grochała, S. Berczyński, Mechanik 92 (12), 778-780 (2019).
• [5] J. Kluczyński, L. Śnieżek, K. Grzelak, A. Oziębło, K. Perkowski, J. Torzewski, I. Szachogłuchowicz, K. Gocman, M. Wachowski, B. Kania, Bull. Pol. Acad. Sci.: Tech. Sci. 68 (6), 1413-1424 (2020).
• [6] A. Klimek, J. Kluczyński, J. Łuszczek, A. Bartnicki, K. Grzelak, M. Małek, Materials 15 (6), 1995 (2022).
• [7] T. Smolnicki, D. Derlukiewicz, M. Stańco, Autom. Constr. 17 (3), 218-223 (2008).
• [8] R. Walczak, J. Pawlicki, A. Zagórski, Arch. Metall. Mater. 61 (3), 1409-1416 (2016).
• [9] P. Gutowski, M. Leus, Tribol. Int. 55, 108-118 (2012).
• [10] P. Wysmulski, H. Debski, Compos. Struct. 245, 112356 (2020).
• [11] P. Rozylo, H. Debski, Compos. Struct. 245, 112388 (2020).
• [12] P. Rozylo, Compos. Struct. 262, 113598 (2021).
• [13] B. Czajka, P. Różyło, Adv. Sci. Technol. Res. J. 16 (2), 216-224 (2022).
• [14] R. Grzejda, K. Kwiatkowski, A. Parus, Int. Appl. Mech. 59 (3), 363-369 (2023).
• [15] K. Konowalski, Adv. Manuf. Sci. Technol. 33 (3), 53-68 (2009).
• [16] R. Buczkowski, M. Kleiber, Comput. Methods Appl. Mech. 195 (37-40), 5141-5161 (2006).
• [17] S. Stupkiewicz, M. Lewandowski, J. Lengiewicz, Int. J. Solids Struct. 51 (23-24), 3931-3943 (2014).
• [18] N.N. Balaji, W. Chen, M.R.W. Brake, Mech. Syst. Signal Process. 139, 106615 (2020).
• [19] A. Baltazar, S.I. Rokhlin, C. Pecorari, J. Mech. Phys. Solids 50 (7), 1397-1416 (2002).
• [20] J.-Y. Kim, A. Baltazar, S.I. Rokhlin, J. Mech. Phys. Solids 52 (8), 1911-1934 (2004).
• [21] S. Kucharski, G. Starzyński, Wear 440-441, 203075 (2019).
• [22] K. Grudziński, R. Kostek, Nonlinear Dynam. 50 (4), 809-815 (2007).
• [23] R. Grzejda, Diagnostyka 15 (2), 61-64 (2014).
• [24] R. Grzejda, J. Comput. Appl. Math. 393, 113534 (2021).
• [25] H. Xiao, Y. Sun, Int. J. Solids Struct. 155, 240-247 (2018).
• [26] P. Jaszak, Int. J. Press. Vessel. Pip. 176, 103954 (2019).
• [27] P. Jaszak, J. Skrzypacz, A. Borawski, R. Grzejda, Materials 15 (12), 4354 (2022).
• [28] G. Shi, Y. Shi, Y. Wang, M.A. Bradford, Eng. Struct. 30 (10), 2677-2686 (2008).
• [29] J. Cao, Z. Zhang, J. Mech. Sci. Technol. 33 (10), 4715-4725 (2019).
• [30] H. Wang, Q. Wu, H. Qian, K. Han, F. Fan, Eng. Struct. 197, 109407 (2019).
• [31] M.M. Nia, S. Moradi, J. Constr. Steel Res. 187, 106929 (2021).
• [32] T. Sadowski, M. Kneć, P. Golewski, Int. J. Adhes. Adhes. 30 (5), 338-346 (2010).
• [33] M. Chybiński, Ł. Polus, Structures 34, 1942-1960 (2021).
• [34] R. Grzejda, Eksploat. Niezawodn. - Maint. Reliab. 24 (2), 269-274 (2022).
• [35] R. Grzejda, M. Warzecha, K. Urbanowicz, Lubricants 10 (5), 75 (2022).
• [36] I.J. Drygala, M.A. Polak, J.M. Dulinska, Eng. Struct. 184, 176-185 (2019).
• [37] P. Wysmulski, Materials 15 (21), 7631 (2022).
• [38] P. Wysmulski, Compos. Struct. 301, 116184 (2022).
• [39] P. Wysmulski, Compos. Struct. 305, 116446 (2023).
• [40] R. Grzejda, A. Parus, IEEE Access 9, 47372-47379 (2021).
• [41] R. Grzejda, A. Parus, FME Trans. 49 (3), 634-642 (2021).
• [42] W.C. Oliver, G.M. Pharr, J. Mater. Res. 19 (1), 3-20 (2004).