Effect of Alloying Elements on Plastic Workability and Corrosion Behavior of Ti-X (X = 6 Co, 8 Cr, 4 Fe, 6 Mn, 10 Mo, and 36 Nb) Binary Alloys

• Autorzy: Zhao Z. , Lee K.

Identyfikatory

DOI

10.1515/amm-2017-0174

• Języki publikacji: EN

Abstrakty

EN

The purpose of this study was to investigate the effect of the alloying elements on the plastic workability and corrosion behavior of Ti-X (wt.%) (X = 6 Co, 8 Cr, 4 Fe, 6 Mn, 10 Mo, and 36 Nb) binary alloys. The alloys with a molybdenum equivalence of 10 wt.% were fabricated by a vacuum arc re-melting process and were then homogenized at a temperature 20°C greater than the beta transus temperature for 14.4 ks. The plastic workability was investigated under uniaxial cold rolling, while the corrosion behavior was examined in Ringer’s solution at 37°C. Among the Ti-X alloys, the Ti-8 wt.% Cr and Ti-6 wt.% Mn alloys showed an outstanding plastic workability and corrosion resistance, respectively.

Słowa kluczowe

EN

molybdenum equivalence; titanium binary alloys; plastic workability; corrosion behaviour; potentiodynamic

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2017
• Tom: Vol. 62, iss. 2B
• Strony: 1185--1190
• Opis fizyczny: Bibliogr. 18 poz. (Błędna numeracja), rys., tab.

Twórcy

autor

Zhao Z.

• School of Materials Science and Engineering, Chonnam National University, Gwangju 61186, Korea (Republic of)

autor

Lee K.

• School of Materials Science and Engineering, Chonnam National University, Gwangju 61186, Korea (Republic of)

Bibliografia

• [1] J. Zhang, F. Sun, Y. Hao, N. Gozdecki, E. Lebrun, P. Vermaut, R. Portier, T. Gloriant, P. Laheurte, F. Prima, Mater. Sci. Eng. A 563, 78-85 (2013).
• [3] L.J. Xu, Y.Y. Chen, Z.G. Liu, F.T. Kong, Journal of Alloys and Compounds 453, 320-324 (2008).
• [4] Y. Zhentao, Z. Lian, Mater. Sci. Eng. A 438-440, 391-394 (2006).
• [5] Y.-L. Zhou, D.-M. Luo, Journal of Alloys and Compounds 509, 6267-6272 (2011).
• [6] W.-F. Ho, T.-Y. Chiang, S.-C. Wu, H.-C. Hsu, J. Alloy. Compd. 468, 533-538 (2009).
• [7] P.F. Santos, M. Niinomi, K. Cho, M. Nakai, H. Liu, N. Ohtsu, M. Hirano, M. Ikeda, T. Narushima, Acta Biomater. 26, 366-376 (2015).
• [8] R. Wang, G. Welsch, J. Biomed. Mater. Res. B Appl. Biomater 101, 1419-1427 (2013).
• [9] J. Lu, Y. Zhao, H. Niu, Y. Zhang, Y. Du, W. Zhang, W. Huo, Mater. Sci. Eng. C Mater. Biol. Appl. 62, 36-44 (2016).
• [10] A. Zafari, X.S. Wei, W. Xu, K. Xia, Acta Mater. 97, 146-155 (2015).
• [11] Y.L. Yang, W.Q. Wang, F.L. Li, W.Q. Li, Y.Q. Zhang, Mater. Sci. Forum 618-619, 169-172 (2009).
• [12] D. Doraiswamy, S. Ankem, Acta Mater. 51, 1607-1619 (2003).
• [13] H.Y. Kim, Y. Ikehara, J.I. Kim, H. Hosoda, S. Miyazaki, Acta Mater. 54, 2419-2429 (2006).
• [14] X.H. Min, S. Emura, T. Nishimura, L. Zhang, S. Tamilselvi, K. Tsuchiya, K. Tsuzaki, Mater. Sci. Eng. A 527, 1480-1488 (2010).
• [15] H.S. Kim, S.J. Yoo, J.W. Ahn, D.H. Kim, W.J. Kim, Mater. Sci. Eng. A 528, 8479-8485 (2011).
• [16] A. Robin, O.A.S. Carvalho, S.G. Schneider, S. Schneider, Mater. Corros. 59, 929-933 (2008).
• [17] A. Cremasco, W.R. Osório, C.M.A. Freire, A. Garcia, R. Caram, Electrochim. Acta 53, 4867-4874 (2008).
• [18] J.-W. Kim, M.-J. Hwang, M.-K. Han, Y.-G. Kim, H.-J. Song, Y.-J. Park, Mater. Chem. Phys. 180, 341-348 (2016).
• [19] S. Takemoto, M. Hattori, M. Yoshinari, E. Kawada, K. Asami, Y. Oda, Dent. Mater. 25, 467-472 (2009).

Uwagi

PL

Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę (zadania 2017)