Routing corners of building structures - by the method of vector addition - measured with RTN GNSS surveying technology

• Autorzy: Krzyżek R.

Identyfikatory

DOI

10.1515/arsa-2015-0015

• Języki publikacji: EN

Abstrakty

EN

The paper deals with the problem of surveying buildings in the RTN GNSS mode using modernized indirect methods of measurement. As a result of the classical realtime measurements using indirect methods (intersection of straight lines or a point on a straight line), we obtain a building structure (a building) which is largely deformed. This distortion is due to the inconsistency of the actual dimensions of the building (tie distances) relative to the obtained measurement results. In order to eliminate these discrepancies, and thus to ensure full consistency of the building geometric structure, an innovative solution was applied - the method of vector addition - to modify the linear values (tie distances) of the external face of the building walls. A separate research problem tackled in the article, although not yet fully solved, is the issue of coordinates of corners of a building obtained after the application of the method of vector addition.

Słowa kluczowe

EN

RTN; RTX GNSS; surveys of buildings; indirect methods of measurement; vector addition; measurement control network

• Wydawca: Centrum Badań Kosmicznych PAN ; De Gruyter
• Czasopismo: Artificial Satellites : Journal of Planetary Geodesy
• Rocznik: 2015
• Tom: Vol. 50, No. 4
• Strony: 181--200
• Opis fizyczny: Bibliogr. 17 poz., rys., tab.

Twórcy

autor

Krzyżek R.

• AGH University of Science and Technology, Faculty of Mining Surveying and Environmental Engineering, Department of Geomatics 30 Mickiewicza Al., 30-059 Krakow, Poland

Bibliografia

• Angrisano A., Gaglione S., Gioia C. (2013). Performance assessment of GPS/GLONASS single point positioning in an urban environment. Acta Geodaetica et Geophysica, Vol. 48, Issue 2, 149-161.
• Bakuła M. (2013). Study of Reliable Rapid and Ultrarapid Static GNSS Surveying for Determination of the Coordinates of Control Points in Obstructed Conditions. Journal of Surveying Engineering, Vol. 139, No. 4, 188-193.
• Beluch J., Krzyżek R. (2005). GPS RTK technology used for indirect methods of topographical surveys. Technical Sciences. Supplement/University of Warmia and Mazury in Olsztyn, suppl. 2, 47-60.
• Figurski M., Bogusz J., Bosy J., Kontny B., Krankowski A., Wielgosz P. (2011). "ASG+": project for improving Polish multifunctional precise satellite positioning system, Reports on Geodesy, Vol. 2 No. 91, 51-57.
• Ge L., Lee I. (2006). The performance of RTK GPS for surveying under challenging environmental conditions. Earth, Planets and Space, Vol. 58, Issue 5, 515-522.
• Krzyżek R. (2014). Reliability analysis of the results of RTN GNSS surveys of building structures using indirect methods of measurement. Geodesy and Cartography, Vol. 63, no. 2, 161-181.
• Krzyżek R. (2013). Verification of applicability of the Trimble RTX satellite technology with xFill function in establishing surveying control networks. Geodesy and Cartography, Vol. 62, no. 2, 217-233.
• Krzyżek R. (2015). Modernization of the method of line-line intersection using RTN GNSS technology for determining the position of corners of buildings. Artificial Satellites, Journal of Planetary Geodesy, Vol. 50, no. 1, 41-57.
• Kowalczyk K. (2011). Analysis of the errors generated during the measurement of situational details RTK GPS method. Acta Scientiarum Polonorum Geodesia et Descriptio Terrarum, 10(1), 5-22.
• Kowalczyk K. (2011). Evaluation of usefulness of measurements of inaccessible points using GPS RTK method with consideration of base errors. Przegląd Geodezyjny, 10, 7-12.
• Leonardo R., Landau H., Nitschke M., Glocker M., Seeger S., Chen X., Deking A., Ben Tahar M., Zhang F., Ferguson K., Stolz R., Talbot M., Lu G., Allison T., Brandl M., Gomez V., Cao W., Kipka A., Trimble Terrasat GmbH Germany. (2011). RTX Positioning: The next generation of cm-accurate Real-Time GNSS Positioning. White Paper_RTX.
• MIA. (2011). Regulation of Minister of Interior and Administration - in case of technical standards of performing detailed surveys and working out and sending results of these surveys to National Geodetic and Cartographic Database (in Polish). Journal of Laws of 2011 No. 263, entry 1572. Warsaw: Government Legislation Centre.
• Paziewski J., Krukowska M., Wielgosz, P. (2014). Preliminary results on performance of new ultra-fast static positioning module - POZGEO-2 in areas outside the ASG-EUPOS network, Geodesy and Cartography, Vol. 63, no. 1, 101-109.
• Pelc-Mieczkowska R. (2012). Analysis of GPS/RTK positioning reliability in hard observational conditions. Zeszyty Naukowe Politechniki Rzeszowskiej, z. 59 (1/II), 217-226.
• Pirti, A., Yucel, M. & Gumus, K. (2013). Testing Real Time Kinematis GNSS (GPS and GPS/GLONASS) methods in obstructed and unobstructed sites, Geodetski Vestnik Vol. 57, no. 3, 498-512.
• Teng Y., Wang J. (2015). A closed-form formula to calculate geometric dilution of precision (GDOP) for multi-GNSS constellations. GPS Solution, 10 February.
• Zhang X., Li P. (2014). Integrating GPS and GLONASS to accelerate convergence and initialization times of precise point positioning. GPS Solution, Vol. 18, Issue 3, 461-471.

Uwagi

Opracowanie rekordu ze środków MNiSW, umowa Nr 461252 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2020).