Optimal reliability for components under thermomechanical cyclic loading

• Autorzy: Bittner L. , Gottschalk H.
• Języki publikacji: EN

Abstrakty

EN

We consider the existence of optimal shapes in a context of the thermo-mechanical system of partial differential equations (PDE) using the recent approach based on elliptic regularity theory (Gottschalk and Schmitz, 2015; Agmon, Douglis and Nirenberg, 1959,1964; Gilbarg and Trudinger, 1977). We give an extended and improved definition of the set of admissible shapes based on a class of sufficiently differentiable deformation maps applied to a baseline shape. The obtained set of admissible shapes again allows to prove a uniform Schauder estimate for the elasticity PDE. In order to deal with thermal stress, a related uniform Schauder estimate will be derived for the heat equation. Special emphasis is put on Robin boundary conditions, which are motivated by the convective heat transfer processes. It is shown that these thermal Schauder estimates can serve as an input to the Schauder estimates for the elasticity equation (Gottschalk and Schmitz, 2015). This is needed to prove the compactness of the (suitably extended) solutions of the entire PDE system in some state space that carries a C2-Hölder topology for the temperature field and a C3-Hölder topology for the displacement. From this, one obtains the property of graph compactness, which is the essential tool to prove the existence of optimal shapes. Due to the topologies employed, the method works for objective functionals that depend on the displacement and its derivatives up to third order, as well as on the temperature field and its derivatives up to second order. This general result in shape optimization is then applied to the problem of optimal reliability, i.e. the problem of finding shapes that have minimal failure probability under cyclic thermomechanical loading.

Słowa kluczowe

EN

shape optimization; probabilistic failure times; optimal reliability

• Wydawca: Systems Research Institute, Polish Academy of Sciences
• Czasopismo: Control and Cybernetics
• Rocznik: 2016
• Tom: Vol. 45, no. 4
• Strony: 421--455
• Opis fizyczny: Bibliogr. 26 poz., rys.

Twórcy

autor

Bittner L.

• School of Mathematics and Science Bergische Universität Wuppertal

autor

Gottschalk H.

• School of Mathematics and Science Bergische Universität Wuppertal

Bibliografia

• [1] Agmon, S., A. Douglis, and Nirenberg, L. (1959) Estimates near the boundary for solutions of elliptic partial differential equations satisfying general boundary conditions i. Communications On Pure And Applied Mathematics, XII: 623–727.
• [2] Agmon, S., Douglis, A., and Nirenberg, L. (1964) Estimates near the boundary for solutions of elliptic partial differential equations satisfying general boundary conditions ii. Communications On Pure And Applied Mathematics, XVII: 35–92.
• [3] Alt, H. W. (2006). Lineare Funktionalanalysis. Springer.
• [4] Bäker, M., Harders, H., and Rösler, J. (2008) Mechanisches Verhalten der Werkstoffe. Vieweg+Teubner, 3rd edition.
• [5] Bolten, M., Gottschalk, H., and Schmitz, S. (2015) Minimal failure probability for ceramic design via shape control. Journal of Optimization Theory and Applications, 166:983–1001.
• [6] Bucur, D. and Buttazzo, G. (2005) Variational Methods in Shape Optimization Problems.
• [7] Birkhäuser. Chenais, D. (1975) On the existence of a solution in a domain identification problem. Journal of Mathematical Analysis and Applications, 52:189–289.
• [8] Ciarlet, P. (1988) Mathematical Elasticity - Volume I: Three-Dimensional Elasticity. Studies in Mathematics and its Applications, 20. NorthHolland.
• [9] Delfour, M. C. and Zolesio (2011) Shape and Geometries. Advances in design and control. SIAM.
• [10] Ern, A. and Guermond, J.-L. (2004) Theory and Practice of Finite Elements. Springer, New York. Escobar, L. A. and Meeker, W. Q. (1998) Reliability Statistics. Wiley.
• [11] Evans, L. C. (2010) Partial Differential Eqations. American Mathematical Society, 2. edition.
• [12] Gilbarg, D. and Trudinger, N. S. (1977) Elliptic Partial Differential Equations of Second Order. Springer, Berlin–Heidelberg-New York.
• [13] Gottschalk, H. and Schmitz, S. (2015) Optimal reliability in design for fatigue life. Journal of Control and Optimization, 52 (5): 2727–2752.
• [14] Haslinger, J. and Mäkinen, R. A. E. (2003) Introduction to Shape Optimization. SIAM.
• [15] Hetnarski, R. B. and Eslami, M. R. (2009) Thermal Stresses - Advanced Theory and Applications. Springer, Berlin–Heidelberg–New York.
• [16] Incropera, F. P. and DeWitt, D. P. (1998) Fundamentals of Mass and Heat Transfer (4th ed.). Wiley & Sons.
• [17] Kallenberg, O. (1983) Random Measures. Akademie–Verlag, Berlin.
• [18] Kays, W. M., Crawford, M. E., and Weigand, B. (2004) Convective Heat and Mass Transfer (4th ed).
• [19] McGraw–Hill. Mäde, L., Schmitz, S., Rollmann, G., Gottschalk, H., and Beck, T. (2017) Probabilistic lcf risk evaluation of a turbine vane by combined size effect and notch support modeling. ASME-Turbo Expo, GT2017–64408.
• [20] Pflug, G. C. and Römisch, W. (2007) Modeling, Measuring and Managing Risk. World Scientific.
• [21] Ramberg, W. and Osgood, W. R. (1943) Description of stress-strain-curves by three parameters. Technical Notes - National Advisory Committee For Aeronautics, 902, Whashington DC.
• [22] Schmitz, S. (2014) A Local and Probabilistic Model for Low-Cycle Fatigue: New Aspects of Structural Analysis. Hartung–Gorre.
• [23] Schmitz, S., Beck, T., Krause, R., Rollmann, G., Seibel, T., and Gottschalk, H. (2013a) A probabilistic model for lcf. Computational Materials Science, 79:584–590.
• [24] Schmitz, S., Seibel, T., Gottschalk, H., Beck, T., Rollmann, G., and Krause, R. (2013b) Probabilistic analysis of the lcf crack initiation life for a turbine blade under thermo–mechanical loading. Proc. Int. Conf LCF 7. Deutscher Verband für Materialforschung und Prüfung, Berlin.
• [25] Sokolowski, J. and Zolesio, J.-P. (1992) Introduction to Shape Optimization - Shape Sensitivity Analysis. Springer, Berlin Heidelberg.
• [26] Watanabe, S. (1964) On discontinuous additive functionals and Lévy measures of a Markov process. Japan. J. Math., 34:53–70.

Uwagi

PL

Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę (zadania 2017).