PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Chromatic dispersion compensation in existing fiber optic telecommunication lines with the growing bit rates needs of DWDM system

Autorzy
Treść / Zawartość
Identyfikatory
Warianty tytułu
PL
Kompensacja dyspersji chromatycznej w istniejących światłowodowych liniach telekomunikacyjnych z rosnącym zapotrzebowaniemprzepływności wsystemach DWDM
Języki publikacji
EN
Abstrakty
EN
The article presents an analysis of the methods of chromatic dispersion compensation in the existing, already built fiber optic telecommunications lines, based on ITU G.652 A and B fibers with the constantly growing demand for bit rates in DWDM systems. Due to the enormous investment costs, it is impossible to replace the cables used with NZDSF, hence the chapter analyzes methods of improving the bandwidth without replacing all cables. Typical models of the optimization of chromatic dispersion in the existing lines are presented.
PL
. W artykule przedstawiono problematykę kompensacji dyspersji chromatycznej w istniejących, już wybudowanych światłowodowych liniach telekomunikacyjnych, opartych o włókna w standardzie ITU G.652 A i B z ciągle rosnącym zapotrzebowaniem na przepływności w systemach DWDM. Ze względu na ogromne koszty inwestycyjne wymiana zastosowanych kabli na NZDSF jest niemożliwa, stąd w artykule analizowane sa sposoby poprawy pasma bez wymiany wszystkich kabli. Przedstawiono typowe modele procesu optymalizacji dyspersji chromatycznej w istniejących liniach.
Rocznik
Strony
38--41
Opis fizyczny
Bibliogr. 16 poz., rys., wykr.
Bibliografia
  • [1] Andreev V. et al.: Chromatic dispersion monitoring based on Bragg notch filter central frequency polyharmonic probing. Proc. SPIE 11146/2019, 111461M, 7–9.
  • [2] Bo L. et al.: Optical frequency comb generation for DWDM transmission over 25- to 50-km standard single-mode fiber. Optical Engineering 57(1), 2018, 1–12.
  • [3] Bobruk T., Wójcik W., Smolarz A.: Dispersion and its compensation in telecommunication optical fibers. Proc. SPIE 6608, 2007, 660814.
  • [4] Chorchos Ł., Turkiewicz J.: SSMF 1310 nm dispersion characteristic influence on the 400 Gbit/s and 1000 Gbit/s ethernet physical layer design, Proc. SPIE 10445, 2017, 104450E.
  • [5] Drabik Z.: Procedura wyznaczania niepewności pomiaru dyspersji chromatycznej Laboratorium Badawczego OTO. OTO Lublin, Lublin 2000.
  • [6] Drabik Z., Koper Z.: Wyzwania dla sieci optycznej TPSA stawiane przez technikę transmisji 10Gbit/s. Researchgate 2003.
  • [7] Fischer G. et al.: Automatic polarization mode dispersion compensation in 40 Gb/s optical transmission system. Ei.Uni-Paderborn, August 2016, 1–5.
  • [8] Hayami S., Mukasa K., Sugizaki R.: Dispersion-Managed Transmission Lines with Reverse-Dispersion Fiber. Furukawa Review 19, 2000, 6–8.
  • [9] Huang Y., Yang H., Mao Y.: Design of linear photonic crystal fiber with allpositive/negative ultraflattened chromatic dispersion for the whole telecom band. Optical Engineering 60(7), 2021, 1–3.
  • [10] Kowalski A.: Modern optical networks and systems. Proc. SPIE 6608, 2007, 660811.
  • [11] Matsiu T., Nakajima K., Sankawa I.: Dispersion Compenastion Over All the Telecomunication Bands With Double–Cladding Photonic-Crystal Fiber. Lightwave Technology 25(3), 2007, 1–5.
  • [12] Nguyen H. et al.: Ultra-flattened chromatic dispersion in all-solid hybrid microstructured optical fibers for mid-infrared lightwave generation. Proc. SPIE 10902, 2019, 109021Q.
  • [13] Perlicki K.: Systemy Transmisji Optycznej WDM. WKŁ, Warszawa 2007.
  • [14] Song P., Wang J., Zhou C.: High birefringence and near-zero dispersion photonic crystal fiber at the wavelength of 1.55 μm. Proc. SPIE 10255, 2017, 102553O.
  • [15] Szymańska A.: Łącza światłowodowe – budżet mocy. Politechnika Warszawska, Ośrodek Kształcenia na Odległość OKNO, Warszawa 2018.
  • [16] http://www.teraxion.com (available 1.10.2021).
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-c5a48179-cab0-48b4-910d-7eafdac40d03
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.