Fabrication of Aluminum - Cr3C2 Surface Composites through Friction Stir Processing and Analyzing its Microstructural and Mechanical Evolution

• Autorzy: Satheeshkumar J. , Jayaraman M. , Priyadharshini G. S. , Sathya Mukesh C. S.

Identyfikatory

DOI

10.24425/amm.2019.130122

• Języki publikacji: EN

Abstrakty

EN

In this paper, aluminium alloy of grade ADC-12 was considered as a base metal and chromium carbide (Cr₃C₂) particles were reinforced through friction stir process. A detailed analysis of mechanical property and metallurgical characterization studies were performed to evaluate the surface composite. Remarkable changes were observed in the developed composite due to the mechanical force produced by the stir tool with an increase in hardness. The metallurgical investigation infers that the presence of silica in ADC-12 alloys has undergone mechanical fracture and long needle structure changed to reduced size. On the other hand, at higher tool rotational speed, the uniform distribution of hard particles was confirmed through SEM micrographs. Thus the modified surface composite has produced good mechanical property with high metallurgical qualities.

Słowa kluczowe

EN

microstructure; microhardness; friction stir processing; ADC-12; chromium carbide

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2019
• Tom: Vol. 64, iss. 4
• Strony: 1527--1532
• Opis fizyczny: Bibliogr. 28 poz., fot., rys.

Twórcy

autor

Satheeshkumar J.

• AVS Engineering College, Department of Mechanical Engineering, 636 003, Tamilnadu, India

autor

Jayaraman M.

• Velalar College of Engineering and Technology, Department of Metallurgical Engineering, Salem 638 012, Tamilnadu, India

autor

Priyadharshini G. S.

• Coimbatore Institute of Technology, Department of Mechanical Engineering, Coimbatore 641 014, Tamilnadu, India

autor

Sathya Mukesh C. S.

• Coimbatore Institute of Technology, Department of Mechanical Engineering, Coimbatore 641 014, Tamilnadu, India

Bibliografia

• [1] Z. Zhou, H. X. Peng, Z. Fan, D. X. Li, Mater. Sci. Tech. 16 (8), 908-912 (2000), DOI: 10.1179/026708300101508676
• [2] S. S. Abdulmalik, R. Ahmad, Appl. Mech. Mater. 660, 214-218 (2014), DOI: 10.5923/j.materials.20110102.10
• [3] E.R.I. Mahmoud, K. Ikeuchi, M. Takahashi, Sci. Technol. Weld. Joi. 13 (7), 607-618 (2008), DOI: 10.1179/136217108X333327
• [4] B. Rajeswari, K. S. Amirthagadeswaran, K. G. Anbarasu, Aust. J. Mech. Eng. 13 (2), 127-135 (2015), DOI: 10.7158/M13-051.2015.13.2.
• [5] A. Thangarasu, N. Murugan, I. Dinaharan, S. J. Vijay, Arch. Civ. Mech. Eng. 15 (2), 324-334 (2015), DOI: 10.1016/j.acme.2014.05.010
• [6] M. Puviyarasan, V. S. Kumar, Procedia Eng. 38 (2012), DOI: 1094-1103.10.1016/j.proeng.2012.06.138
• [7] T. Thankachan, K. S Prakash, V. Kavimani, Mater. Manuf. Process. 33 (3), 299-307 (2018), DOI: 10.1080/10426914.2017.1291952
• [8] G. S. Priyadharshini, R. Subramanian, N. Murugan, R. Sathiskumar, Mater. Manuf. Process. 32 (12), 1416 (2017), DOI: 10.1080/10426914.2017.1339318.
• [9] Q. Liu, L. Ke, F. Liu, C. Huang, L. Xing, Mater. Design. 45, 343-348 (2013), DOI: 10.1016/j.matdes.2012.08.036
• [10] T. Thankachan, K. S. Prakash, M. Loganathan, Mater. Manuf. Process. 33 (3), 350-358 (2017), DOI: 10.1080/10426914.2017.1339311
• [11] S. Sahraeinejad, H. Izadi, M. Haghshenas, A. P. Gerlich, Mat. Sci. Eng. A-Struct. 626, 505-513 (2015), DOI: 10.1016/j.msea.2014.12.077
• [12] S. A. Hosseini, K. Ranjbar, R. Dehmolaei, A. R. Amirani, J. Alloy. Compd. 622, 725-733 (2015), DOI: 10.1016/j.jallcom.2014.10.158
• [13] Z. Y. Ma, Metall. Mater. Trans A 39A, 642-658 (2008).
• [14] K. Korkmaz, Surf. Coat. Tech. 272, 1-7 (2015), DOI: 10.1016/j.surfcoat.2015.04.033
• [15] Chris Della Corte, Harold E. Sliney. Asle. Trans. 30 (1), 77-83 (1987).
• [16] G. Herranz, G. Matula, A. Romero, Powder. Metall. 60 (2), 120-130 (2017).
• [17] P. Selvakumar, N. Muthukumarasamy, S. Agilan, Mater. Res. Bull. 108, 61-72 (2018).
• [18] T. Satiskumar, R. Subramanian, S. Shalini, P. C. Angelo, J. Sci. Ind. Res. India75, 89-94 (2016).
• [19] T. Satiskumar, R. Subramanian, S. Shalini, A. Gowrishankar, P. C. Angelo, Met. Sci. Heat. Treat. 59 (7-8), 509-512 (2017).
• [20] J. Nampoothiri, R. Baldev, K. Ravi, T. Indian. I. Metals. 68, 1101-1106 (2015).
• [21] G. S. Priyadharshini, R. Subramanian, N. Murugan, R. Sathiskumar, Mater. Manuf. Process. 32 (12), 1416-1427 (2017).
• [22] M. Sabbaghian, M. Shamanian, H. R. Akramifard, M. Esmailzadeh, Ceram. Int. 40 (8), 12969-12976 (2014).
• [23] M. Barmouz, M. K. Givi, J. Jafari, Adv. Mat. Res. 154-155, 1761-1766 (2011).
• [24] M. Sharifitabar, A. Sarani, S. Khorshahian, M. S. Afarani, Mater. Des. 32, 4164-4172 (2011).
• [25] R. Fernandez, B. Jodoin, J. Therm. Spray. Techn. 26 (6), 1356-1380 (2017).
• [26] A. Thangarasu, N. Murugan, I. Dinaharan, S. J. Vijay, Sadhana-Acad. P. Eng. S. 37 (5), 579-586 (2012).
• [27] T. Thankachan, K. S. Prakash, Mat. Sci. Eng. A-Struct. 688, 301-308 (2017), DOI: 10.1016/j.msea.2017.02.010
• [28] G. S. Priyadharshini, R. Subramanian, N. Murugan, R. Sathiskumar, J. Mech. Sci. Technol. 31 (8), 3755-3760 (2017), DOI: 10.1007/s12206-017-0718-8