Study of influence of periodic defects on the propagation of wedge waves using laser ultrasound technique and finite element analysis

• Autorzy: Yang Che-Hua , Jeyaprakash N. , Fang Chi-Chong

Identyfikatory

DOI

10.1007/s43452-022-00395-8

• Języki publikacji: EN

Abstrakty

EN

Wedge wave is a kind of elastic wave propagation along the tip of a wedge. In this study, a brass wedge with an apex angle of 60° was used as the substrate test piece and periodic defects were designed at the wedge tips. Laser ultrasonic technique and finite element analysis were used to investigate the influence of periodic defects at the wedge tip. The influence of different periodic defect parameter changes on the guided wave of the wedge body was studied. After obtaining the time-domain signal of the experiment and numerical analysis, the result was compared with the signal processing of Fast Fourier Transform. Result showed that the frequency domain signals would be effected by periodic defects on wedge tips, basic frequency would be downgraded by increase in defect width or increase in number of defects. But, the results did not reflect on the frequency channel phenomenon of phononic crystals. The wedge guided wave passing through three periodic defects and four periodic defects showed an error percentage of 1.4–2.9, which confirm the convergence of the results. The experimental measurement agreed well with the finite element simulation results. The results of this study can be applied to estimate the defect width and penetration wave.

Słowa kluczowe

EN

elastic wave; periodic defects; wedge tip; laser ultrasonic technique; finite element analysis

PL

fala sprężysta; defekty okresowe; laserowa technika ultradźwiękowa; analiza elementów skończonych

• Wydawca: Springer ; Wrocław University of Science and Technology
• Czasopismo: Archives of Civil and Mechanical Engineering
• Rocznik: 2022
• Tom: Vol. 22, no. 2
• Strony: art. no. e74, 1--19
• Opis fizyczny: Bibliogr. 20 poz., il., tab., wykr.

Twórcy

autor

Yang Che-Hua

• Graduate Institute of Manufacturing Technology, National Taipei University of Technology, Taipei, Taiwan
• Additive Manufacturing Center, National Taipei University of Technology, Taipei, Taiwan

autor

Jeyaprakash N.

• Graduate Institute of Manufacturing Technology, National Taipei University of Technology, Taipei, Taiwan
• Additive Manufacturing Center, National Taipei University of Technology, Taipei, Taiwan

• https://orcid.org/0000-0003-4229-4716

autor

Fang Chi-Chong

• Graduate Institute of Manufacturing Technology, National Taipei University of Technology, Taipei, Taiwan

Bibliografia

• 1. Chen M-I, Tesng S-P, Lo P-Y, Yang C-H. Characterization of wedge waves propagating along wedge tips with defects. Ultrasonics. 2018;82:289-297.
• 2. Krylov VV. Overview of localised flexural waves in wedges of power-law profile and comments on their relationship with the acoustic black hole effect. J Sound Vib. 2020;468:115100.
• 3. Lagasse PE. Analysis of a dispersion free guide for elastic waves. Electron Lett. 1972;8:372.
• 4. Lipson RH, Lu C. Photonic crystals: a unique partnership between light and matter. Eur J Phys. 2009;30:S33-48.
• 5. Lagasse PE, Mason IM, Ash EA. Acoustic surface wave guides analysis and assessment. IEEE Trans Sonics Ultrasonics SU. 1973;20(2):143-154.
• 6. Tai-Ho Yu, Yin C-C. A modal sensor integrated circular cylindrical wedge wave ultrasonic motor. Sens Actuators A. 2012;174:144-154.
• 7. Lagasse PE, Mason IM, Ash EA. Acoustic surface waveguides - analysis and assessment. In: IEEE transactions on microwave theory and techniques, vol. MTT-21, no. 4, 1973.
• 8. McKenna J, Boyd GD. Plate theory solution for guided flexural acoustic waves along the tip of a wedge. In: IEEE transactions on sonics and ultrasonics, vol. Su-21, no.3, 1974. pp. 178-186.
• 9. Krylov VV. Conditions for validity of the geometrical-acoustics approximation in application to waves in an acute-angle solid wedge. Soviet Phys Acoust. 1989;35(2):176-180.
• 10. Junjing M. Application of wedge-shaped guided waves in tool wear detection. Master's Thesis, Institute of Mechanical Engineering, Chang Gung University, Taoyuan, 2004.
• 11. Junren Z. Research on elastic wave transmission behavior of bilinear vertex angle wedge. Master's Thesis, Institute of Mechanical Engineering, Chang Gung University, Taoyuan, 2004.
• 12. Jiahao X. Research on tool wear using wedge-shaped wave guided waves. Master's Thesis, Institute of Mechanical Engineering, Chang Gung University, Taoyuan, 2006.
• 13. Crane LJ, Gilchrist MD, Miller JJH. Analysis of Rayleigh-Lamb wave scattering by a crack in a elastic plate. Comput Mech.1997;19:533-7.
• 14. Zhao XL, Rose JL. Boundary element modeling for defect characterization potential in a wave guide. Int J Solids Struct. 2003;40:2645-58.
• 15. Peiyuan L. Behavioral research on wedge-shaped dissemination on defective edges. Master's Thesis, Institute of Manufacturing Technology, National Taipei University of Technology, Taipei, 2013.
• 16. Stormer HL, Chin MA, Gossard AC, Wieg W. Selective transmission of high-frequency phonons by a superlattice: the “dielectric” phonon filter. Phys Rev Lett. 1979;43:2012.
• 17. Gao J, Zou XY, Cheng JC. Band gaps of lower-order Lamb wave in thin plate with one-dimensional phononic crystal layer: effect of substrate. Appl Phys Lett. 2008;92:023510.
• 18. Morvan B. Lamb wave reflection at the free edge of plate. J Acoust Soc Am. 2003;113(3):1417-25.
• 19. Kawashima K. “Finite element simulation of propagation of leaky surface waves excited by a line-focused transducer, review of progress in quantitative non distructive. Evaluation. 1998;17:955-1002.
• 20. Nokhbatolfoghahai A, Navazi HM, Groves RM. Use of delay and sum for sparse reconstruction improvement for structural health monitoring. J Intell Mater Syst Struct. 2019;30(18-19):2919-2931.

Uwagi

Opracowanie rekordu ze środków MEiN, umowa nr SONP/SP/546092/2022 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2022-2023)