Structure and Properties of Ni/Diamond Nanocrystalline Coatings

• Autorzy: Mazurek A. , Trzaska M.

Identyfikatory

DOI

10.24425/amm.2019.130095

• Języki publikacji: EN

Abstrakty

EN

This paper presents the results of research of Ni/diamond composite coatings produced by electrochemical reduction method. Research was focused on composite coatings with nickel matrix and diamond as a disperse phase and for comparison purposes on nanocrystalline nickel coatings. Ni/diamond composite coatings were produced in baths with different content of nanodiamond powder. The structures of the dispersed phase and the composite coatings were analysed by using X-ray diffraction, scanning electron microscopy and light microscopy. Measurements of selected properties of the coatings were performed, including roughness, microhardness, adhesion and abrasive wear resistance. The research results indicate that the produced coatings have a compact structure and good adherence to steel substrate. Moreover, nanocrystalline Ni/diamond composite coatings exhibit greater hardness and reduced abrasive wear resistance compared to nanocrystalline nickel coatings.

Słowa kluczowe

EN

diamond; nickel/diamond; composite coatings

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2019
• Tom: Vol. 64, iss. 4
• Strony: 1309--1314
• Opis fizyczny: Bibliogr. 14 poz., fot., rys., tab.

Twórcy

autor

Mazurek A.

• Łukasiewicz Research Network - Institute of Precision Mechanics, 3 Duchnicka Str., 01-796 Warszawa, Poland

autor

Trzaska M.

• Łukasiewicz Research Network - Institute of Precision Mechanics, 3 Duchnicka Str., 01-796 Warszawa, Poland

Bibliografia

• [1] V.V.N. Reddy, B. Ramamoorthy, P. Kesavan Nair, Wear 239, 111-116 (2000).
• [2] K.-H. Hou, H.-T. Wang, H.-H. Sheu, M.-D. Ger, Appl. Surf. Sci. 308, 372-379 (2014).
• [3] Z. Karaguiozova, J. Kaleicheva, V. Mishev, G. Nikolcheva, Tribol. Int. 39, 444-451 (2017).
• [4] H. Mazaheri, S. R. Allahkaram, Appl. Surf. Sci. 258, 4574-4580 (2012).
• [5] M. Sajjadnejad, H. Omidvar, M. Javanbakht, A. Mozafari, J. Alloy Compd. 704, 809-817 (2017).
• [6] M. Trzaska, A. Mazurek, Corrosion Protection 11, 404-406 (2015).
• [7] Y. Reyes-Vidal, R. Suarez-Rojas, C. Ruiz, J. Torres, S. Talu, A. Mendez, G. Trejo, Appl. Surf. Sci. 342, 34-41 (2015).
• [8] M. Trzaska, A. Mazurek, Composite Theory and Practice 1, 37-41 (2016).
• [9] N. P. Wasekar , P. Haridoss, S. K. Seshadri, G. Sundararajan, Surf. Coat. Tech. 291, 130-140 (2016).
• [10] A. Kondej, Surface Engineering 1, 76-79 (2017).
• [11] M. Pushpavanam, H. Manikandan, K. Ramanathan, Surf. Coat. Tech. 201, 6372-6379 (2007).
• [12] M. K. Das, R. Li, J. Qin, X. Zhang, K. Das, A. Thueploy, S. Limpanart, Y. Boonyongmaneerat, M. Ma, R. Liu. Surf. Coat. Tech. 301, 337-343 (2017).
• [13] H. Ogihara, M. Safuan, T. Saji, Surf. Coat. Tech 212, 180-184 (2012).
• [14] F. Hou, W. Wang, H. Guo, Appl. Surf. Sci. 252, 3812-3817 (2006).