Quality analysis of plates for car industry

• Autorzy: Szklarzyk P. , Klimecka-Tatar D. , Sygut P. , Lipińki T.
• Języki publikacji: EN

Abstrakty

EN

In 2013, global steel production reached a level of 1.548 million tons. This value indicates that, in the 21st century, steel is still one of the most popular construction materials. In Poland 8.2 million tons of steel was produced in 2013. A large share of steel is used for the production of hot-rolled plates for car bodies. Steel products made in high temperature processes are used in virtually all sectors of industries. The hot-rolled plates for car bodies should comply with the highest quality requirements. In this chapter the results of research from the 3-month follow-up are presented. To assess the level of non-conformity in hot-rolled plates the Pareto-Lorenz diagram was used. The results are the basis for the improvement of the production process of hot-rolled products.

Słowa kluczowe

EN

hot-rolled products; Pareto-Lorenz diagram; Total Quality Management (TQM)

PL

produkty walcowane na gorąco; diagram Pareto-Lorenza; kompleksowe zarządzanie jakością (TQM)

• Wydawca: Oficyna Wydawnicza Stowarzyszenia Menedżerów Jakości i Produkcji
• Czasopismo: Production Engineering Archives
• Rocznik: 2014
• Tom: Vol. 4, No. 3
• Strony: 11--13
• Opis fizyczny: Bibliogr. 7 poz., rys., tab.

Twórcy

autor

Szklarzyk P.

• Czestochowa University of Technology. Faculty of Management. Management and Engineering of Production. Poland

autor

Klimecka-Tatar D.

• Czestochowa University of Technology. Faculty of Management. Management and Engineering of Production. Poland

autor

Sygut P.

• Czestochowa University of Technology. Faculty of Management. Management and Engineering of Production. Poland

autor

Lipińki T.

• University of Warmia and Mazury in Olsztyn

Bibliografia

• 1. PN-EN ISO 2000:2006. Systemy zarządzania jakością. Podstawy i terminologia.
• 2. PN-EN 10149-3:2000.
• 3. Borkowski S.2004. Mierzenie poziomu jakości. Publisher Wyższa Szkoła Zarządzania i Marketingu in Sosnowiec. Sosnowiec.
• 4. Borkowski S., Ulewicz R. 2009. Instrumenty doskonalenia procesów produkcyjnych. Wyd. PTM. Warszawa.
• 5. Dobrzański L. A. 2002. Podstawy nauki o materiałach i metaloznawstwo. Materiały inżynierskie z podstawami projektowania materiałowego. Wydawnictwo Naukowo-Techniczne. Gliwice-Warszawa.
• 6. Ulewicz R. 2003. Quality control system in production of the castings from spheroid cast iron. In: Metalurgija, Croatia. Vol. 42, Issue 1, pp. 61-63.
• 7. Krynke M., Mielczarek K. 2013. An evaluation of realization of the production process in the cement mill. Production Engineering Archives. No. 1. ISSN 2353-5156.