Investigation of the Tribological Behaviors of Upholstery Woven Fabrics after Abrasion

• Autorzy: Akgun Mine

Identyfikatory

DOI

10.2478/aut-2019-0021

• Języki publikacji: EN

Abstrakty

EN

Fabric surface tribology is an important area of study in upholstery fabrics, which is exposed to high friction and abrasion effects. In the studies on the tribology of upholstery fabrics, it is ensured that criteria such as better performance, less degradation, increased usage time, and user comfort are determined and taken into consideration in the woven fabric design. Surface roughness and friction coefficients are important parameters used in determining abrasion, deformation, and wear behaviors of fabrics. In this study, the surface abrasion behaviors of upholstery fabrics woven with basic and jacquard weave patterns and also different structural parameters were investigated in terms of the changes in surface roughness parameters (amplitude parameters: Ra, Rpm, and Rvm and hybrid parameters: Δa) and the changes in surface friction coefficients. These results were also related to the state of the visual changes in the fabrics. Rpm, Rvm, and Δa being roughness parameters were found to be important in the evaluation of the surface deformation of the fabrics after abrasion besides the Ra parameter. Results showed that the Δa roughness parameter could be suitable for evaluating the deformation of the textile structures to be used, particularly in sensitive applications.

Słowa kluczowe

EN

surface roughness parameters; surface friction coefficient; abrasion; upholstery fabrics

PL

parametry chropowatości powierzchni; współczynnik tarcia powierzchniowego; przetarcie; tkanina obiciowa

• Wydawca: Lodz University of Technology, Faculty of Material Technologies and Textile Design
• Czasopismo: Autex Research Journal
• Rocznik: 2020
• Tom: Vol. 20, no. 2
• Strony: 110--120
• Opis fizyczny: Bibliogr. 23 poz.

Twórcy

autor

Akgun Mine

• Faculty of Engineering, Textile Engineering Department, Bursa Uludag University, Görükle Campus, 16059 Bursa, Turkey

Bibliografia

• [1] Bhushan, B. (2001). Modern Tribology Handbook, Volume One Principles of Tribology. Boca Raton, CRC Press.
• [2] Williams, J. (2005). Engineering Tribology. New York, Cambridge University Press.
• [3] Hutchings, I., Shipway, P. (2017). Tribology: Friction and Wear of Engineering Materials, 2nd Edition, Saint Louis, Elsevier.
• [4] Collier, B. J., Epps, H. H. (1998). Textile Testing & Analysis. New Jersey, NJ, Prentice-Hall.
• [5] Manich, A. M., De Castellar, M. D., Sauri, R. M. (2001). Abrasion kinetics of wool and blended fabrics. Textile Research Journal, 71, 469-474.
• [6] Sarıduman, S. (2005). A Study on the features of miscellaneous weft wale corduroys in industrial production. M.Sc. Thesis, Department of Textile Engineering, Institute of Natural and Applied Science, University of Cukurova, 169.
• [7] Abdullah, I., Blackburn, R. S., Russell, S. J., Taylor, J. (2006). Abrasion phenomena in twill tencel fabric. Journal of Applied Polymer Science, 102, 1391-1398.
• [8] Backer, S. (1951). The relationship between the structural geometry of a textile fabric and its physical properties: Part II: The mechanics of fabric abrasion. Textile Research Journal, 21, 453-468.
• [9] Backer, S., Teanenhaus, S. J. (1951). The relationship between the structural geometry of a textile fabric and its physical properties Part III: Textile geometry and abrasion-resistance. Textile Research Journal, 21, 635-654.
• [10] Weiner, L. I. (1961). A note on directional effects in the abrasion of cotton sateen. Textile Research Journal, 31, 580-582.
• [11] Ruppenicker, G. F., Rhodes, P. L., Harper, R. J., Verburg, G. P., Little, H. W. (1971). American Dyestuff Reporter, 60, 31.
• [12] Can, Y., İnanç, L. (2017). Change of rubbing fastness with abrasion effect on cotton plain fabrics. Düzce University Journal of Science & Technology, 5, 50-55.
• [13] Kaynak, H. K., Topalbekiroğlu, M. (2008). Influence of fabric pattern on the abrasion resistance property of woven fabrics. Fibres & Textiles in Eastern Europe, 16, 54-56.
• [14] Saha, R. (2011). Advances in topographic characterization of textile materials. Journal of Innovation & Development Strategy, 5, 67-74.
• [15] Vandenberg, S., Osborne, C. F. (1992). Digital image processing techniques, fractal dimensionality and scale-space applied to surface roughness. Wear, 159, 17-30.
• [16] Militky, J., Bajzik, V. (2003). Surface roughness of heat protective clothing textiles. International Journal of Clothing Science and Technology, 15, 258-267.
• [17] Gadelmawla, E. S., Koura, M. M., Maksoud, T. M. A., Elewa, I. M., Soliman, H. H. (2002). Roughness parameters. Journal of Materials Processing Technology, 123, 133-145.
• [18] Jeddi, A. A. A., Shams, S., Nosraty, H., Sarsharzadeh, A. (2003). Relations between fabric structure and friction: Part I: Woven fabrics. Journal of the Textile Institute, 94, 223-234.
• [19] Ohsawa, M., Namiki, S., Kodaka, H. (1979). Relationship between fabric balance and surface friction of plain-woven fabrics. Journal of the Textile Machinery Society of Japan, 32, T40-T46.
• [20] Zurek, W., Jankowiak, D., Frydrych, I. (1985). The surface frictional resistance of fabrics woven from filament yarns. Textile Research Journal, 55, 113-121.
• [21] Das, A., Kothari, V. K., Nagaraju, V. (2007). Frictional characteristics of woven suiting and shirting fabrics. Indian Journal of Fibre & Textile Research, 32, 337-343.
• [22] Das, A., Kothari, V. K., Vandana, N. (2005). A study on frictional characteristics of woven fabrics. Autex Research Journal, 5, 133-140.
• [23] Balcı, G., Sülar, V. (2013). Yarn friction properties: Importance and test methods. The Journal of Textiles and Engineers, 16, 6-15.

Uwagi

Opracowanie rekordu ze środków MNiSW, umowa Nr 461252 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2020).