PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Concept of the thermal integration of the compressed air energy storage system with the power plant

Wybrane pełne teksty z tego czasopisma
Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
The article presents the concept of an innovative hybrid system that integrates the compressed air energy storage system with a conventional power plant. Using simple mathematical models, the proposed hybrid system was compared with the classic adiabatic system. The article also presents the results of more detailed thermodynamic analyzes for the compressed air energy storage system, which has been thermally integrated with the 600 MW coal-fired power plant. The first stage of integration enables the storage system to utilize the heat of compressed air (air cooling) for condensate heating, which results in partial replacement of the low-pressure regeneration of power unit and subsequently power increase. The second stage of integration allows to heat the air during discharging of the energy storage system before air expanderusing the heat of superheated steam which is directed from the steam turbine bleeding to the high pressure regeneration exchanger. Such organized integration, although contributing to the decrease in the efficiency of the power unit, allows to eliminate the need for gaseous fuel in the energy storage system, as in the case of diabatic systems, or heat storage, as in the case of adiabatic systems.Three variants of the hybrid system were analyzed. The evaluation of hybrid system variants was made using the energy storage efficiency defined in the article.
Rocznik
Strony
176--186
Opis fizyczny
Bibliogr. 11 poz., rys., tab., wykr.
Twórcy
  • Institute of Power Engineering and Turbomachinery, Silesian University of Technology, Gliwice, Poland
  • Energoprojekt-Katowice SA, Katowice, Poland
  • Faculty of Mining and Geology, Silesian University of Technology, Gliwice, Poland
Bibliografia
  • [1] Eurostat http://ec.europa.eu/eurostat.
  • [2] K. Badyda, J. Milewski, Elektrownie caes - możliwości akumulacji energii oraz wpółpracy ze źródłami odnawialnymi, Instal (2) (2010) 58–65.
  • [3] Bartela Ł., Milewski J., Directions for improving the flexibility of coal fired units in an era of increasing potential of renewable energy sources. Chapter in: Power Engineering. Advences and Challenges, Part A: Thermal, Hydro and Nuclear Power, edited by V. Badescu, G.C. Lazaroiu, L. Barelli, CRC Press, Taylor and Francis Group, 2018, pp. 29-44.
  • [4] X. Luo, J. Wang, M. Dooner, J. Clarke, C. Krupke, Overview of current development in compressed air energy storage technology, Energy Procedia 62 (2014) 603–611.
  • [5] M. Budt, D. Wolf, R. Span, J. Yan, Compressed air energy storage an option for medium to large scale electrical-energy storage, Energy procedia 88 (2016) 698–702.
  • [6] Rogers A., Henderson A., Wang X., Negnevitsk M.: Compressed Air Energy Storage: Thermodynamic and Economic Review. PES General Meeting Conference & Exposition, 2014 IEEE, National Harbor, MD, USA, 27-31 July 2014.
  • [7] M. Raju, S. K. Khaitan, Modeling and simulation of compressed air storage in caverns: a case study of the huntorf plant, Applied Energy 89 (1) (2012) 474–481.
  • [8] V. Tola, V. Meloni, F. Spadaccini, G. Cau, Performance assessment of adiabatic compressed air energy storage (a-caes) power plants integrated with packed-bed thermocline storage systems, Energy conversion and management 151 (2017) 343–356.
  • [9] Rwe Power. Adele–adiabatic compressed-air energy storage for electricity supply. rep RWE power 1-12.https://www.rwe.com/web/cms/mediablob/en/391748/ data/364260/1/rwe-power-ag/innovations/Brochure-ADELE.pdf.
  • [10] J. Milewski, K. Badyda, Ł. Szabłowski, Compressed air energy storage systems, Journal of Power Technologies 96 (4) (2016) 245–260.
  • [11] M. Lutyński, G. Smolnik, S. Waniczek, et al., Underground coal mine workings as potential places for compressed air energy storage, in: IOP Conference Series: Materials Science and Engineering, Vol. 545, IOP Publishing, 2019, p. 012014.
Uwagi
PL
Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2019).
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-c4ea7e6e-b2e5-49e0-8afc-533bc2168ca4
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.