The Influence of the Process Parameters on the Microstructure and Properties SLM Processed 316L Stainless Steel

• Autorzy: Woźniak A. , Adamiak M. , Chladek G. , Kasperski J.

Identyfikatory

DOI

10.24425/amm.2019.131098

• Języki publikacji: EN

Abstrakty

EN

Selective Laser Melting (SLM) is a modern manufacturing method with many applications in medicine, aerospace and auto-motive industries. SLM processed materials are characterized by good dimensional accuracy and properties comparable or superior to materials obtained by traditional processing methods. In this paper an SLM process was used to obtain 316L stainless steel parts. This paper presents the microstructure, chemical and phase composition, physicochemical and electrochemical properties of 12 groups of tested samples, differentiated by the SLM processing parameters. Based on the investigation, it can be inferred that the selection of the appropriate SLM parameters is very important to determined final material properties. The samples producedwith the energy density E = 600 J/mm³ were observed to possess optimum properties - a homogeneous structure, density closest to the desired one, good wettability and pitting corrosion resistance.

Słowa kluczowe

EN

SLM; 316L stainless steel; corrosion test; wettability

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2020
• Tom: Vol. 65, iss. 1
• Strony: 73--80
• Opis fizyczny: Bibliogr. 17 poz., rys., tab., wzory

Twórcy

autor

Woźniak A.

• Silesian University of Technology, Faculty of Mechanical Engineering, Department of Engineering Materials and Biomaterials, 18A Konarskiego Str., 44-100, Gliwice, Poland

autor

Adamiak M.

• Silesian University of Technology, Faculty of Mechanical Engineering, Department of Engineering Materials and Biomaterials, 18A Konarskiego Str., 44-100, Gliwice, Poland

autor

Chladek G.

• Silesian University of Technology, Faculty of Mechanical Engineering, Department of Engineering Materials and Biomaterials, 18A Konarskiego Str., 44-100, Gliwice, Poland

autor

Kasperski J.

• Medical University of Silesia, School of Medicine with The Division of Dentistry in Zabrze, Department of Prosthetic Dentistry, Plac Akademicki 17, 41-902 Bytom, Poland

Bibliografia

• [1] E. Liverani, S. Toschi, L. Ceschini, A. Fortuanto, J. Mater. Process. Technol. 249, 255-263 (2017).
• [2] P. Gao, B. Zuo, Ch. Hugan, H. Gao, J. Mater. Process. Technol. 240, 12-22 (2017).
• [3] J. A. Cherry, H. M. Davies, S. Mehmood, N. P. Lavery, S.G.R. Brown, J. Sienz, Int. J. Adv. Manuf. Technol. 76, 869-879 (2015).
• [4] W. Gao, Y. Zhang, D. Ramanujan, K. Ramani, Y. Chen, Ch. B. Williams, Ch.C.L. Wang, Y. C. Sinh, S. Zhang, P. D. Zavatteri, Comput. Aided Des. 69, 65-89 (2015).
• [5] B. Zhang, H. Liao, Ch. Coddet, Appl. Surf. Sci. 279, 310-316 (2013).
• [6] A. Ziębowicz, A. Woźniak, B. Ziębowicz, The Influence of Technology on the Physicochemical and Electrochemical Properties of the Prosthetic Materials in: Gzik M., Tkacz E., Paszenda Z., Piętka E. (eds), Innovations in Biomedical Engineering. IBE 2017. Advances in Intelligent Systems and Computing, Vol. 623. Springer, Cham (2017).
• [7] M. Król, L. A. Dobrzański, Ł. Reimann, I. Czaja, Arch. Mater. Sci. Eng. 60 (2), 87-92 (2013).
• [8] A. Stwora, G. Skrabalak, J. Achiev. Mater. Manuf. Eng. 61 (2), 375-380 (2013).
• [9] A. Ziębowicz, A. Woźniak, B. Ziębowicz, M. Adamiak, P. Boryło, Arch. Mater. Sci. Eng. 89 (1), 20-26 (2018).
• [10] W. Kajzer, A. Kajzer, W. Walke, J. Marciniak, J. Achiev. Mater. Manuf. Eng. 18 (1-2), 115-118 (2006).
• [11] http://www.renishaw.com
• [12] R. Cheraghali, Sh. Mordadi, M. Ghoranneviss, A. P. Aberomand, S. A. Kohrrmi, Asian J. Chem. 23 (7), 2833-2836 (2011).
• [13] B. Adriaan, M. Spiergings, R. Eggenberger, Rapid Prototyping J. 17 (5), 380-386 (2011).
• [14] S. Firlik, J. Molenda, Chemik 64 (4), 238-245 (2010).
• [15] PN-EN ISO 10993-13:2010.
• [16] B. Zhang, L. Dembinski, C. Coddet, Mat. Sci. Eng. 584, 21-31 (2013).
• [17] K. Zhang, S. Wang, H. Shang, Mater. & Design 55, 104-119 (2014).

Uwagi

PL

Opracowanie rekordu ze środków MNiSW, umowa Nr 461252 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2020).