Innovated Technologies of Recycling of Metallic Wastes - Modification of Existing Industrial Processes

• Autorzy: Brožová Silvie , Pustějovská Pavlína , Bilík Jiří , Jursová Simona , Zbranková Monika , Havránek Jaroslav

Identyfikatory

DOI

10.2478/ntpe-2019-0100

• Języki publikacji: EN

Abstrakty

EN

This paper describes interesting operational experiments have been performed in the scope of the project where the process of melting deoxidation was used under improvised conditions of cold blast cupola furnace. The goal was to find out metallurgical effects of added self-reducing briquettes prepared from steel sludge into cupola furnace charge and above all to verify the grade of deoxidation of oxides of iron at keeping output quality of cast metal. Present state of research and development of technologies of iron production in the area of commercial exploitation of these technologies is not in such a position that we could realistically assess their efficiency, investment costs and economic impacts. Moreover, an unequivocal requirement on minimization of CO₂ emissions, mainly by its recycling, is here more and more promoted.

Słowa kluczowe

EN

technologies; iron; wastes

PL

technologia produkcji; żelazo; odpady

• Wydawca: STE GROUP ; De Gruyter
• Czasopismo: New Trends in Production Engineering
• Rocznik: 2019
• Tom: Vol. 2, Iss. 2
• Strony: 361--367
• Opis fizyczny: Bibliogr. 19 poz., rys., tab.

Twórcy

autor

Brožová Silvie

• VŠB-TUO, Technical University of Ostrava, Czech Republic

autor

Pustějovská Pavlína

• VŠB-TUO, Technical University of Ostrava, Czech Republic

autor

Bilík Jiří

• VŠB-TUO, Technical University of Ostrava, Czech Republic

autor

Jursová Simona

• VŠB-TUO, Technical University of Ostrava, Czech Republic

autor

Zbranková Monika

• VŠB-TUO, Technical University of Ostrava, Czech Republic

autor

Havránek Jaroslav

• VŠB-TUO, Technical University of Ostrava, Czech Republic

Bibliografia

• 1.Baricová, D., (2002). Recycling of oxygen converter flue dust into oxygen converter charge, Metalurgija, vol. 41, no. 3, p. 242.
• 2. Baricova, D. et al., (2013). Steelmaking slag - waste or valuable secondary raw material, Conference Proceedings 13th International Multidisciplinary Conference SGEM, pp. 437-442.
• 3. Bernasowski, M. (2014). Theoretical Study of the Hydrogen Influence on Iron Oxides Reduction at the Blast Furnace Process, Steel Research International, Germany,vol. 85, no.4, pp. 670-678.
• 4. Birat, J. P., Antoine, M., Dubs, A., Gaye, H., (1993). “Vers une sidérurgie sans carbone?”, Revue de Métallurgie, vol. 90, pp. 411-421.
• 5. Birat, J.P., (2008). Steel and CO2 – the ULCOS Program, CCS and Mineral Carbonation using Steelmaking Slag, 3rd International Conference on Process Development in Iron and Steelmaking, 8-11 June 2008, Luleå, Sweden
• 6. Brožová, S, Pustějovská, P., (2009). Jiné možnosti zpracování kovonosných oxidických odpadů s využitím plazmového ohřevu, Odpadové fórum 2009: sborník přednášek. Praha: PCHE - PetroChemEng, pp. 3292-3253.
• 7. Dry, R.J., Bates, C.P., Price, D.P., (1999). HIsmelt – compartitive hot metal from ore fines and steel plant wastes, METEC Congress 99, Düsseldorf 14-15 june.
• 8. Džupková M. et al.(2011). Evaluation of selected technological and ecological parameters of sinter production, Acta Metallurgica Slovaca, vo. 17, no. 4, pp. 269-27.
• 9. Findorak R. et al., (2013). The effect of charcoal addition on iron-ore sintering emission, Conference Proceedings 13th International Multidisciplinary Conference SGEM, pp.629-636.
• 10. Fröhlichová M. et al., (2015). Influence of biomass on the structure of iron ore sinter, Conference Proceedings 15th International Multidisciplinary Conference SGEM, pp 615-620.
• 11. HIsmelt [10.5.2014] http://www.riotinto.com/ironore/hismelt-4724.aspx
• 12. Janík, I., Bilík, J., Kret, J., Brožová, S., (2008). Koncept přímé výroby oceli bez emisí skleníkových plynů, Dílčí zpráva rozvojového záměru MŠMT: DeCOx – Snížení emisí CO2 v metalurgii. Ostrava.
• 13. Knepper, M., Babich, A., Senk, D., (2012). Reaktionskinetic von Reduktionstragern im Hochofen und Schmelzvergaser, Tagungsband 27. Aachener Stahlkolloquium, Eurogress Aachen 2012, pp. 85-96.
• 14. Król, L. (1983). Redukcja bezprośrednia rud żelaza, Katowice: Śląsk 1983, s. 219.
• 15. Leimalm U., Ökvist, L.S., Björkman, B. (2008). Effect of Different PCI Practice on the Texture Obtained during Reduction of Iron Oxide Pellets, ISIJ International, Vol.48, No. 12, pp. 1686-1695.
• 16. Pustějovská, P., Kardas, E., Jursová, S., Ingaldi, M., Brožová, S., Konstanciak, A.(2014). Nové metody zpracování a recyklace jemnozrnných kovonosných odpadu, Hutnické listy vol. LXVII, no.1, pp. 24-28.
• 17. Research Reports [10.5.2014] http://www.purdue.edu/discoverypark/energy/CCTR/researchreports.php
• 18. Roth, J.L., Frieden, R., Hansmann, T., Monai, J., Solvi, M. (2001). Primus, a new process for recycling, by-products and producing virgin iron, La Revue de Métallurgie - CIT November 2001, p. 987.
• 19. Fischer-Tropsch Processing (FT) Indiana Center for Coal Technology Research, June 2007. http://www.purdue.edu/dp/energy/CCTR/www.worldsteel.org

Uwagi

Opracowanie rekordu ze środków MEiN, umowa nr SONP/SP/546092/2022 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2022-2023).