Design and Modeling of an Experimental Hydraulic Device

• Autorzy: Tkáč Z. , Halenár M. , Kosiba J.

Identyfikatory

DOI

10.2478/mape-2018-0009

• Języki publikacji: EN

Abstrakty

EN

The design of the experimental laboratory device is based on the construction of the hydraulic circuits of mobile devices. It is possible to ensure the repeatability of the flow characteristic measurements at the laboratory. This means that in the operating test it is possible to verify the flow characteristics of the hydraulic pump and these results are not affected by the change in the physical properties of the applied liquid. By comparing of the flow characteristics directly on the work equipment (mini-excavator, etc.), the disadvantage is the need for dismantling the hydraulic pump and its mounting on the laboratory device. In some working device removal is not possible, where dismantling is structurally difficult or is time consuming, which increases the cost of their operation.The proposed experimental laboratory device serves to verify the flow characteristics of the hydraulic pump and is also designed to be universal, to test external gear hydraulic pump and hydraulic pump with inclined plate.

Słowa kluczowe

EN

hydraulic fluid; flow rate; flow rate efficiency

• Wydawca: STE GROUP ; De Gruyter
• Czasopismo: Multidisciplinary Aspects of Production Engineering
• Rocznik: 2018
• Tom: Vol. 1, Iss. 1
• Strony: 63--68
• Opis fizyczny: Bibliogr. 21 poz., fig.

Twórcy

autor

Tkáč Z.

• Slovak University of Agriculture in Nitra, Slovak Republic

autor

Halenár M.

• Slovak University of Agriculture in Nitra, Slovak Republic

autor

Kosiba J.

• Slovak University of Agriculture in Nitra, Slovak Republic

Bibliografia

• 1. Asaff, Y., De Negri, V.J., Theissen, H. and Murrenhoff, H. (2014). Analysis of the Influence of Contaminants on the Biodegradability Characteristics and Ageing of Biodegradable Hydraulic Fluids. Strojniski Vestnik - Journal of Mechanical Engineering, 60(6). pp. 417-424.
• 2. Casoli, P., Vacca, A. and Franzoni, G. (2005). A Numerical Model for the Simulation of External Gear Pumps. JFPS Symposium on Fluid Power, TSUKUBA, pp. 705-710.
• 3. Dobrota, D., Lalic, B. and Oršulić, M. (2010). Experimental Modielng of Volumetric Efficiency of High Pressure External Gear Pump. Naše More, 57(5-6), pp. 235-240.
• 4. Dynatec. 2011. Hydraulic components. Taichuna City, Taiwan.
• 5. Hao, X., Zhou, X., Liu, X. and Sang, X. (2016). Flow characteristics of external gear pumps considering trapped volume. Advances in Mechanical Engineering, 8(10), pp. 1-10.
• 6. Chrastina, J., Janoško, I. and Polonec, T. (2013). System for monitoring operating parameters of vehicles. Trends in agricultural engineering 2013. Prague: Czech University of Life Sciences Prague, pp. 267-272.
• 7. Inaguma, Y. and Yoshida, N. (2013). Mathematical analysis of influence of oil temperature on efficiencies in hydraulic pumps for automatic transmission. SAE International Journal of Passenger Cars – Mechanical Systems, 6(2), pp. 786-797.
• 8. Kim, J.H. and Kim, S.G. (2013). A Study on the Approximate Model of the Flow Rate Characteristics in External Gear Pump for EHPS. Journal of the Korea Academia-Industrial cooperation Society, 14(2), pp. 548-553.
• 9. Kučera, M., Majdan, R., Abrahám, R., Kučera, M. and Haas, P. (2016). Analysis of the effect of loading process on tribological system properties. Acta Universitatis Agriculturae et Silviculturae Mendelianae Brunensis. 64(3), pp. 825833.
• 10. Kučera, M., Rusnák, J., Kadnár, M. and Malý, V. (2016). Analysis of tribologic properties of selected steels. Tehnički vjesnik, 23(3), pp. 647-651.
• 11. Kučera, M., Aleš, Z., Ivandić, Z. and Hujo Ľ. (2013). Possibility of hydraulic fluids with a low environmental impact application in agriculture and transport machinery. Journal of Central European Agriculture, 14(4), pp. 1575-1584.
• 12. Kozuma, F., Arita, T. and Tsuda, H. (2005). Development of Energy Saving Power Steering. JFPS Symposium on Fluid Power, TSUKUBA, pp. 297-300.
• 13. Lindák, S., Majdan, R., Janoško, I., Pap, M. and Szabó, M. (2014). Hydraulic device for simulation of pressure shocks. Acta technologica agriculturae. 17(2), pp. 44-48
• 14. Mendoza, G., Igartua, A., Fernandez-Diaz, B., Urquiola, F., Vivanco, S. and Arguizoniz, R. (2011). Vegetable oils as hydraulic fluids for agricultural applications. Grasas y aceites, 62(1), pp. 29-38.
• 15. Molari, G. and Sedoni, E. (2008). Experimental evaluation of power losses in a power-shift agricultural tractor transmission. Biosystems Engineering, 100(2) pp. 177-183.
• 16. Rana, A.D. (2015). Performance evaluation of external gear pump with the used of burnt oil. International Journal of Advanced Technology in Engineering and Science, 3(Special Issue), pp. 466-473.
• 17. Sigloch, H. (2009). Technische Fluidmechanik. Berlín: Springer-Verlag 2009.
• 18. Tkáč, Z., Kosiba, J., Hujo, Ľ., Jablonický, J. and Nosian, J. (2018). Experimental hydraulic device for the testing of hydraulic pumps and liquids. Tribology in Industry, 40(1). pp. 149-155.
• 19. Tóth, F., Rusnák, J., Kadnár, M. and Váliková, V. (2014). Study of tribological properties of chosen types of environmentally friendly oils in combined friction conditions. Journal of Central European Agriculture, 15(1) pp. 185-192.
• 20. Tulík, J., Hujo, Ľ., Stančík, B. and Ševčík, P. (2013). Research of new ecological synthetic oil-based fluid. Journal of Central European Agriculture, 14(4), pp. 1384-1393.
• 21. Will, D., Gebhardt, N., Nollau, R. and Herscher, D. (2011). Hydraulik. Heidelberg: Springer-Verlag.

Uwagi

Opracowanie rekordu ze środków MNiSW, umowa Nr 461252 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2021).