VOC combustion on ceramic foam supported catalst

• Autorzy: Gancarczyk A. , Iwaniszyn M. , Mokrzycki Ł. , Rojek W. , Duraczyńska D. , Machej T. , Kowalska J. , Jaroszyński M. , Kołodziej A.

Warianty tytułu

PL

Dopalanie lotnych związków organicznych na katalizatorze naniesionym na pianie ceramicznej

• Języki publikacji: EN

Abstrakty

EN

Open cellularceramic foam with the Mn-Cu catalyst layered was investigated in the toluene combustion process. Foam morphology was studied using computed microtomography. The results proved satisfactory functioning of the foam supported catalyst, better than the monolith supported one, probably due to more intense mass transfer of the foam-based reactor.

PL

Stała piana ceramiczna o otwartych porach z naniesionym katalizatorem Mn-Cu była badana w procesie dopalania toluenu. Morfologia piany była badana z użyciem mikrotomografii komputerowej. Wyniki wykazały zadowalające funkcjonowania katalizatora naniesionego na pianę, prawdopodobnie wobec intensywniejszego transportu masy.

Słowa kluczowe

EN

catalytic combustion; ceramic foam; solid foam morphology; reaction kinetics

PL

dopalanie katalityczne; piana ceramiczna; morfologia pian stałych; kinetyka reakcji

• Wydawca: Instytut Inżynierii Chemicznej Polskiej Akademii Nauk
• Czasopismo: Prace Naukowe Instytutu Inżynierii Chemicznej Polskiej Akademii Nauk
• Rocznik: 2016
• Tom: nr 20
• Strony: 63--75
• Opis fizyczny: Bibliogr. 22 poz., rys., tab.

Twórcy

autor

Gancarczyk A.

• Institute of Chemical Engineering, Polish Academy of Sciences, Bałtycka 5, 44-100 Gliwice, Poland

autor

Iwaniszyn M.

• Institute of Chemical Engineering, Polish Academy of Sciences, Bałtycka 5, 44-100 Gliwice, Poland

autor

Mokrzycki Ł.

• Jerzy Haber Institute of Catalysis and Surface Chemistry, Polish Academy of Sciences Niezapominajek 8, 30-239 Krakow, Poland

autor

Rojek W.

• Jerzy Haber Institute of Catalysis and Surface Chemistry, Polish Academy of Sciences Niezapominajek 8, 30-239 Krakow, Poland

autor

Duraczyńska D.

• Jerzy Haber Institute of Catalysis and Surface Chemistry, Polish Academy of Sciences Niezapominajek 8, 30-239 Krakow, Poland

autor

Machej T.

• Jerzy Haber Institute of Catalysis and Surface Chemistry, Polish Academy of Sciences Niezapominajek 8, 30-239 Krakow, Poland

autor

Kowalska J.

• Faculty of Civil Engineering, Opole University of Technology, Katowicka 48, 45-061 Opole, Poland

autor

Jaroszyński M.

• Institute of Chemical Engineering, Polish Academy of Sciences, Bałtycka 5, 44-100 Gliwice, Poland

autor

Kołodziej A.

• Institute of Chemical Engineering, Polish Academy of Sciences, Bałtycka 5, 44-100 Gliwice, Poland

Bibliografia

• [1] Duduković M.P., Larachi F., Mills P.L., 2002. Multiphase catalytic reactors: A perspective on current knowledge and future trends. Catal. Rev.: Sci. Eng., 44, 123-246. DOI: 10.1081/Cr-120001460.
• [2] Cybulski A., Moulijn J.A., 1994. Monoliths in heterogeneous catalysis. Catal. Rev.: Sci. Eng., 36, 179-270. DOI: 10.1080/01614949408013925.
• [3] Pangarkar K., Schildhauer T.J., van Ommen J.R., Nijenhuis J., Kapteijn F., Moulijn J.A., 2008. Structured packings for multiphase catalytic reactors. Ind. Eng. Chem. Res., 47, 3720-3751. DOI:10.1021/ie800067r.
• [4] Incera Garrido G., Patcas F.C., Lang S., Kraushaar-Czarnetzki B., 2008. Mass transfer and pressure drop in ceramic foams: A description for different pore sizes and porosities. Chem. Eng. Sci., 63, 5202-5217. DOI: 10.1016/j.ces.2008.06.015.
• [5] Patcas F.C. Incera Garrido G., Kraushaar-Czarnetzki B., 2007. CO oxidation over structured carriers: A comparison of ceramic foams, honeycombs and beads. Chem. Eng. Sci., 62, 3984-3990. DOI:10.1016/j.ces.2007.04.039.
• [6] Richardson J.T., Remue D., Hung J.-K., 2003. Properties of ceramic foam catalyst supports: mass and heat transfer. Appl. Catal., A, 250, 319. DOI: 10.1016/S0926-860x(03)00287-4.
• [7] Giani L., Groppi G., Tronconi E., 2005. Mass-transfer characterization of metallic foams as supports for structured catalysts. Ind. Eng. Chem. Res., 44, 4993-5002. DOI: 10.1021/ie0490886.
• [8] Lacroix M., Dreibine L., de Tymowski B., Vigneron F., Edouard D., Bégin D., Nguyen P., Pham C., Savin-Poncet S., Luck F., Ledoux M.-J., Pham-Huu C., 2011. Silicon carbide foam composite containing cobalt as a highly selective and re-usable Fischer–Tropsch synthesis catalyst. Appl. Catal., A, 397, 62-72. DOI: 10.1016/j.apcata.2011.02.012.
• [9] Pestryakov A.N., Yurchenko E. N., Feofilov A. E., 1996. Foam-metal catalysts for purification of waste gases and neutralization of automotive emissions. Catal. Today, 29, 67. DOI: 10.1016/0920-5861(95)00266-9.
• [10] Richardson J.T., Garrait M., Hung J.K., 2003. Carbon dioxide reforming with Rh and Pt–Recatalysts dispersed on ceramic foam supports. Appl. Catal., A, 255, 69-82. DOI: 10.1016/S0926-860x(03)00645-8.
• [11] Liebmann L.S., Schmidt L.D., 1999. Oxidative dehydrogenation of isobutane at short contact times, Appl. Catal., A, 179, 93-106. DOI: 10.1016/S0926-860x(98)00302-0.
• [12] Flick D.W., Huff M.C., 1999. Oxidative dehydrogenation of ethane over supported chromium oxide and Pt modified chromium oxide. Appl. Catal., A, 187, 13-24. DOI: 10.1016/S0926-860x(99)00179-9.
• [13] Twigg M.V., Richardson J.T., 1995. Preparation and properties of ceramic foam catalyst supports. Stud. Surf. Sci. Catal., 91, 345-359. DOI: 10.1016/S0167-2991(06)81771-4.
• [14] Cerri I., Saracco G., Specchia V., 2000. Methane combustion over low-emission catalytic foam burners. Catal. Today, 60, 21-32. DOI: 10.1016/S0920-5861(00)00313-8.
• [15] Saracco G., Badini C., Specchia V., 1999. Catalytic traps for diesel particulate control. Chem. Eng.Sci., 54, 3035-3041. DOI: 10.1016/S0009-2509(98)00462-X.
• [16] van Setten B.A.A.L., Bremmer J., Jelles S.J., Makkee M., Moulijn J.A., 1999. Ceramic foam as a potential molten salt oxidation catalyst support in the removal of soot from diesel exhaust gas. Catal. Today, 53, 613-621. DOI: 10.1016/S0920-5861(99)00149-2.
• [17] Ciambelli P., Palma V., Russo P., Vaccaro S., 2000. Soot catalytic combustion in the presence of NO. Combust. Sci. Technol., 153, 325-337. DOI: 10.1080/00102200008947268.
• [18] Ochońska-Kryca J., Iwaniszyn M., Piątek, M., Jodłowski P.J., Thomas J., Kołodziej A., Łojewska J., 2013. Mass transport and kinetics in structured steel foam reactor with Cu-ZSM-5 catalyst for SCR of NOx with ammonia. Catal. Today, 216, 135-141. DOI: 10.1016/j.cattod.2013.05.018.
• [19] Ochońska J., McClymont D., Jodłowski P.J., Knapik A., Gil B., Makowski W., Łasocha W., Kołodziej A., Kolaczkowski S.T., Łojewska J., 2012. Copper exchanged ultrastable zeolite Y–A catalyst for NH3-SCR of NOx from stationary biogas engines. Catal. Today, 191, 6-11. DOI: 10.1016/j.cattod.2012.06.010.
• [20] Aguero F.N., Barbero B.P., Sanz O., Echave Lozano F.J., Montes M., Cadus L.E., 2010. Influence of the support on MNOx metallic monoliths for the combustion of volatile organic compounds. Ind. Eng. Chem. Res., 49, 1663–1668. DOI: 10.1021/ie901567a.
• [21] Agrafiotis C., Tsetsekou A., 2000. The effect of processing parameters on the properties of ϒ- alumina washcoats deposited on ceramic honeycombs. J. Mater. Sci., , 35, 951-960. DOI:10.1023/A:1004762827623.
• [22] Kołodziej, A., Łojewska, J., Tyczkowski, J., Jodłowski, P., Redzynia, W., Iwaniszyn, M., Zapotoczny, S., Kuśtrowski, P., 2012. Coupled engineering and chemical approach to the design of a catalytic structured reactor for combustion of VOCs: Cobalt oxide catalyst on knitted wire gauzes. Chem. Eng. J., 200-202, 329-337. DOI: 10.1016/j.cej.2012.06.067.

Uwagi

Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę (zadania 2017).