PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

PbS nanopowder – synthesis, characterization and antimicrobial activity

Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
Lead sulphide (PbS) nanopowder was synthesized by a simple soft chemical route using lead nitrate and thiourea as precursor salts. The as-synthesized nanopowder was characterized by XRD, SEM, EDX, FT-IR, PL, Raman and magnetic measurements. XRD studies reveal the polycrystalline nature of the powder. The powder exhibits face-centered cubic structure with a strong (2 0 0) preferential orientation. The presence of Pb and S in the powder is confirmed by energy dispersive X-ray analysis. The peaks observed at 1112 cm-1 and at 606 cm-1 in the FT-IR spectrum are related to heteropolar diatomic molecules of PbS. The Raman peak shift at 173 cm-1 might have originated from the combination of longitudinal and transverse acoustic phonon modes associated with PbS crystal. The M-H loop confirms the paramagnetic nature of the as-synthesized PbS nanopowder. The nanopowder has significant antimicrobial activity against certain bacteria and fungi strains which make it suitable as antimicrobial agent against pathogenic microorganisms.
Wydawca
Rocznik
Strony
322--328
Opis fizyczny
Bibliogr. 26 poz., rys., tab.
Twórcy
autor
  • PG and Research Department of Physics, AVVM Sri Pushpam College, Poondi-613 503, Tamilnadu, India
autor
  • PG and Research Department of Physics, AVVM Sri Pushpam College, Poondi-613 503, Tamilnadu, India
Bibliografia
  • [1] BAGADE C.S., GHANWAT V.B., KNOT K.V., BHOSALE P.N., Mater. Lett., 164 (2016), 52.
  • [2] VOIT J., Rep. Prog. Phys., 58 (1994), 977.
  • [3] RAJASHREE C., BALU A.R., NAGARETHINAM V.S., Surf. Eng., 31 (2015), 316.
  • [4] PETERSON J.J., KRAUSS T.D., Nano Lett., 6 (2006), 510.
  • [5] MCDONALD S.A., KONSTANTATOS G., ZHANG S., CYR P.W., KLEM J.D.E., LEVINA L., SARGENT E.H., Nat. Mater., 4 (2005), 138.
  • [6] INUK K., FRANK W.W., J. Opt. Soc. Am., 14 (1997), 1632.
  • [7] SCANLON W.W., Phys. Rev., 109 (1958), 47.
  • [8] WANG Y., Accounts Chem. Res., 24 (1991), 133.
  • [9] GAJJAR P., PETTEE B., BRITT D.W., HUANG W., JOHSNON W.P., ANDERSON J., J. Biol. Eng., 3 (2009), 9.
  • [10] USHARANI K., BALU A.R., Acta Metall. Sin., 28 (2015), 64.
  • [11] RAVISHANKAR S., BALU A.R., ANBARASI M., NAGARETHINAM V.S., Optik, 126 (2015), 2550.
  • [12] VAEZI M.R., SADRNEZHAAD S.K., Mater. Design, 28 (2007), 515.
  • [13] BORHADE A.V., UPHADE B.K., Chalcogenide Lett., 9 (2012), 299.
  • [14] PAWAR S.B., SHAIKH J.S., DEVAN R.S., MA Y.R., HARANATH D., BHOSALE P.N., PATIL P.S., Appl. Surf. Sci., 258 (2011), 1869.
  • [15] BANWELL C.N., MCCASH E.M., Fundamentals of molecular spectroscopy, Tata McGraw Hill, New Delhi, 2010.
  • [16] SELVAN G., ABUBAKER M.P., USHARANI K., BALU A.R., Surf. Eng., 32 (2015), 212.
  • [17] MURALI G., REDDY D.A., SAMBASAIVAM S., GIRIBABU G., VIJAYALAKSHMI R.P., VENUGOPAL R., REDDY B.K., Mater. Lett., 93 (2013), 149.
  • [18] CHAURE S., CHAURE N.B., PANDEY R.K., Physica E, 28 (2005), 436.
  • [19] SMITH G.D., FIRTH S., CLARK R.J.H., CARDONA M., J. Appl. Phys., 92 (2002), 4375.
  • [20] SHAPTER J.G., BROOKER M.H., SKINNER W.M., Int. J. Miner. Process., 60 (2000), 199.
  • [21] BURGIO L., CLARK R.J.H., FIRTH S., Analyst, 126 (2001), 222.
  • [22] OVSYANNIKOV S.V., SHCHENNIKOV V.V., CANTARERO A., CROSS A., TITOV A.N., Mat. Sci. Eng. A-Struct., 462 (2007), 422.
  • [23] HUANG Q.L., CHEN H., WU C.L., ZHANG Y.C., Mater. Lett., 64 (2010), 1891.
  • [24] PERKAS N., LIPOVSKY A., AMIRIAN G., NITZAN Y., GEDANKEN A., J. Mater. Chem., 8 (2013), 5309.
  • [25] STOHS S.J., BAGEHI D., Free Radical Bio. Med., 18 (1995), 321.
  • [26] APPLEROT G., LIPOVSKY A., DROR R., PERKAS N., NITZAN Y., LUBART R., GEDANKEN A., Adv. Funct. Mater., 19 (2009), 842.
Uwagi
Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę (zadania 2017).
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-c32457f0-84b4-42c4-be9d-09a9263a3afb
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.