Matrix FMEA analysis of the flow control valve

• Autorzy: Fabis-Domagala Joanna , Momeni Hassan , Domagala Mariusz , Filo Grzegorz , Bikass Saeed , Lempa Paweł

Identyfikatory

DOI

10.2478/cqpi-2019-0079

• Języki publikacji: EN

Abstrakty

EN

Reliability is a key feature in engineering systems and might be improved by using preventive methods, which allows for identification potential failures and establishing cause-and-effect relationships in consistent and systematic way. One of the popular quality improvement method is FMEA (Failure Modes and Effects Analysis). An application of matrix FMEA analysis method on example of flow control valve has been presented and discussed in the work. Presented example shows also a different ways of evaluating failures and theirs influence on analysis results.

Słowa kluczowe

EN

hydraulic system protection; safety valve; relief valve; FMEA

PL

zabezpieczenie układu hydraulicznego; zawór bezpieczeństwa; zawór nadmiarowy; FMEA

• Wydawca: De Gruyter
• Czasopismo: Quality Production Improvement - QPI
• Rocznik: 2019
• Tom: Vol. 1, Iss. 1
• Strony: 590--595
• Opis fizyczny: Bibliogr. 14 poz., rys., tab.

Twórcy

autor

Fabis-Domagala Joanna

• Cracow University of Technology, Institute of Applied Informatics, Jana Pawla II 37, 31-841 Cracow, Poland

autor

Momeni Hassan

• Western Norway University of Applied Sciences, Department of Mechanical and Marine Engineering, Inndalsveien 28, 5063 Bergen, Norway

autor

Domagala Mariusz

• Cracow University of Technology, Institute of Applied Informatics, Jana Pawla II 37, 31-841 Cracow, Poland

autor

Filo Grzegorz

• Cracow University of Technology, Institute of Applied Informatics, Jana Pawla II 37, 31-841 Cracow, Poland

autor

Bikass Saeed

• Western Norway University of Applied Sciences, Department of Mechanical and Marine Engineering, Inndalsveien 28, 5063 Bergen, Norway

autor

Lempa Paweł

• Cracow University of Technology, Institute of Applied Informatics, Jana Pawla II 37, 31-841 Cracow, Poland

Bibliografia

• 1.Hamrol, A., Mantura, W., 2004. Quality management. Theory and practice. Zarządzanie jakością. Teoria i praktyka, Warszawa, PWN [in Polish].
• 2.Fabis-Domagala, J., 2017. Analysis of defects and failures of hydraulic gear pumps with the use of selected qualitative methods, Tribiologia, 2/2017, 33-38.
• 3.Filo, G., Fabis-Domagala, J., Domagala, M., Lisowski, E., Momeni, H., 2018. The idea of fuzzy logic usage in a sheet-based FMEA analysis of mechanical systems. MATEC Web Conf., 183, art. 03009. DOI: 10.1051/matecconf/201818303009
• 4.Stock, M.E., Stone, R.B., Tumer, I.Y., 2003. Going back in time to improve design: the elemental function-failure design method. DETCʼ03 ASME 2003 Design Engineering Technical Conference, Computers and Information in Engineering Conference, Chicago, ASME.
• 5.Domagala, M., Momeni, H., Domagala-Fabis, J., Filo, G., Krawczyk, M., 2018a. Simulation of Cavitation Erosion in a Hydraulic Valve. Materials Research Proceedings, 5, 1-6. DOI: 10.21741/9781945291814-1
• 6.Domagala, M., Momeni, H., Domagala-Fabis, J., Filo, G., Kwiatkowski, D., 2018b. Simulation of Particle Erosion in a Hydraulic Valve. Materials Research Proceedings, 5, 17-24. DOI: 10.21741/9781945291814-4
• 7.Karpisz, D., Kielbus, A., 2019. The Revitalization of Radar System as a Case of Functional and Information Security Problems. System Safety: Human - Technical Facility – Environment, 1, 692-699. DOI: 10.2478/czoto-2019-0088
• 8.Kielbus, A., Karpisz, D., 2019. Risk management as a process security tool. System Safety: Human-Technical Facility-Environment, 1, 234-239. DOI: 10.2478/czoto2019-0030
• 9.Korzekwa, J., Skoneczny, W., Dercz, G., Bara, M. Wear mechanism of Al2O3/WS2 with PEEK/BG plastic. J. Tribol.-T. ASME 2014, vol. 136, art. 011601. DOI: 10.1115/1.4024938
• 10.Kozien, E., Kozien, M.S., 2017. Interval analysis as a method of measurement of uncertainity in the check-list method applied to identification of stage phase of companies. 26th Int. Scientific Conf. Economic and Social Development. Zagreb, Varazdin, 210-215.
• 11.Lipinski, T., 2015. Double modification of AlSi9Mg alloy with boron, titanium and strontium. Arch. Metall. Mater., 60, 2415-2419. DOI: 10.1515/amm-2015-0394
• 12.Maszke, A., Dwornicka, R., Ulewicz, R., 2018. Problems in the implementation of the lean concept at a steel works – Case study. MATEC Web Conf., vol. 183, art. 01014. DOI: 10.1051/matecconf/201818301014
• 13.Pacana, J., Pacana, A., 2018. Analysis of Possibilities of Using Polymeric Materials for Testing Prototypes of Harmonic Drive. Materials Research Proceedings, 5, 61-66. DOI: 10.21741/9781945291814-11
• 14.Skrzypczak-Pietraszek, E., Pietraszek, J., 2012. Chemical profile and seasonal variation of phenolic acid content in bastard balm (Melittis melissophyllum L., Lamiaceae). Journal of Pharmaceutical and Biomedical Analysis, 66, 154-161. DOI: 10.1016/j.jpba.2012.03.037

Uwagi

Opracowanie rekordu ze środków MNiSW, umowa Nr 461252 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2020).