A choice of the optimum cutting ranges for cutting nozzles A-SD for selection of metallurgical material

• Autorzy: Stančeková Dana , Rudawska Anna , Kulla Albert , Petrů Jana , Holubják Jozef

Identyfikatory

DOI

10.12913/22998624/92095

• Języki publikacji: EN

Abstrakty

EN

On the market there are plenty of machines for cutting of steel via a mixture of oxygen and flammable gases. Various manufacturers provide several types of torches, cutting nozzles and other equipment in their product range. Cutting nozzles are a component that significantly affects quality of cutting based in set parameters. However, data from catalogues and manuals by manufacturers on cutting parameters of nozzles are rarely in use in real conditions. That is why optimum cutting conditions for cutting via nozzles A-SD made by RHONA were tested and the final results were compared with those in the catalogue for a proper use in practice.

Słowa kluczowe

EN

cutting nozzles; data from catalogues; cutting parameters; final results

PL

dysza tnąca; dane z katalogów; parametry cięcia; ostateczne rezultaty

• Wydawca: Lublin University of Technology ; Polish Society of Ecological Engineering (PTIE), Branch of PTIE in Lublin
• Czasopismo: Advances in Science and Technology. Research Journal
• Rocznik: 2018
• Tom: Vol. 12, no 3
• Strony: 106--113
• Opis fizyczny: Bibliogr. 18 poz., fig., tab.

Twórcy

autor

Stančeková Dana

• University of Žilina, Faculty of Mechanical Engineering, Univerzitna 1, 010 26, Žilina, Slovakia

autor

Rudawska Anna

• Lublin University of Technology, Faculty of Mechanical Engineering, ul. Nadbystrzycka 36, 20-618 Lublin, Poland

autor

Kulla Albert

• University of Žilina, Faculty of Mechanical Engineering, Univerzitna 1, 010 26, Žilina, Slovakia

autor

Petrů Jana

• VSB -TU Ostrava, Faculty of Mechanical Engineering, 17. listopadu 15/2172, 708 33 Ostrava, Czech Republic

autor

Holubják Jozef

• University of Žilina, Faculty of Mechanical Engineering, Univerzitna 1, 010 26, Žilina, Slovakia

Bibliografia

• 1. Čuboňová N. and Kuric. I. Data structures implementation of the protocol STEP-NC at CNC machines programming. 16(3A), 2014, 176-183.
• 2. Czán A., Sajgalík M., Holubjak J. and Kouril K.Studying of cutting zone when finishing titanium alloy by application of multifunction measuring system. Manufacturing Technology, 13(4), 2013, 428-431
• 3. Hloch S., Hlaváček J., Vasilko K., Cárach J., Samardžić I., Kozak D., Hlavatý I., Ščučka J.J., Klich, J. and Klichová, D.Abrasive WaterJet (AWJ) Titanium Tangential Turning Evaluation. Metalurgia, 53(4), 2014, 537-540.
• 4. http://www.linde-gas.sk [cit. 2010-3-21].
• 5. http://www.matnet.sav.sk/index.php?ID=373- [cit. 2009-11-11].
• 6. http://www.pierce.cz/scorpion.htm [cit. 17.2.2017].
• 7. Krejčí L., Hlavatý I. and Ševčíková X.Transition Zones Study of the Heterogenous Welded Joints. Metal 2013. Brno, Czech Republic 2013, 785-789.
• 8. Náprstková N., Cais J., Stančeková D. and Kraus, P. Analysis of the composition of selected interts using electron microscopy. Manufacturing Technology, 16(5), 2016, 1063-1067.
• 9. Panda A., Duplak J., Hatala M., Krenicky T. and Vrabel P. Research on the durability of selected cutting materials in the process of turning carbon steel. MM Science Journal, October, 2016, 1086-1089.
• 10. Petru J., Schiffner J., Zlamal T, Sadílek, M. and Stancekova D. Investigations of cutting tool wear while machining inconel 718. Manufacturing Technology, 15(3), 2015, 396–403.
• 11. Radvanská A., Hreha P., Knapčíková L.,Petrů J., Zlámal T. and Monka, P. Influence of focusing tube wear on vibrations and surfaces roughness. Technical Gazette, 22(2), 2015. 271-278.
• 12. Rudawska A., Danczak I., Muller M. and Valasek P. The effect of sandblasting on surface properties for adhesion. International journal of adhesion and adhesives, vol. 70, 2016, 176-190.
• 13. Sadílek M.,Kratochvíl J.,Petrů J., Cep R.,Zlámal T.andStančeková D.Cutting tool wear monitoring with the use of impedance layers. Tehnicki Vjesnik, 21(3), 2014, 639 – 644.
• 14. Sága M., Vaško M., Čuboňová N. and Piekarska W. Optimisation Algorithms in Mechanical Engineering Applications.Harlow: Pearson. 2016.
• 15. Šajdlerová I., Gregušová, M. and Schindlerová, V. Potential of value stream mapping utilization in the seamless steel tubes manufacturing process. METAL 2015: 24th International Conference on Metallurgy and Materials, Brno, Czech Republic 2015, 2056-2064.
• 16. Sapieta M.,Sapietova A. and Deky, V. Comparison of the thermoelastic phenomenon expressions in stainless steels during cyclic loading. Metalurgija, 56(1-2), 2017, 203-206.
• 17. Stancekova D.,Semcer J., Sajgalik M. and Janota M. Heat-Affected Zone of Plasma of Laser Cut Materials. Manufacturing Technology, vol. 3, 2014, 451–456.
• 18. Stuchlý V., Poprocký R. and Kaczmarek M. Reliability evaluation as a means of increasing the efficiency of equipment maintenance. Advances in Science and Technology Research Journal, vol. 10, no. 32, 2016, 40-46.

Uwagi

Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2018).