The influence of grinding speed on the creep-feed grinding process

• Autorzy: Żyłka Ł. , Płodzień M. , Babiarz R.

Identyfikatory

DOI

10.30464/jmee.2018.2.4.285

• Języki publikacji: EN

Abstrakty

EN

Grinding is usually the last stage of the technological process and determines the quality of manufactured products. One of the varieties of grinding more and more often used in practice is deep grinding which is called Creep-Feed Grinding. It is characterized by a high value of grinding infeed and slow feed. Technological parameters such as the depth of grinding and the speed of feed have a significant impact on the quality of the workpiece. However, also the grinding speed has an influence on the grinding process and the result of machining. Therefore, experimental studies on the impact of grinding speed on the surface roughness and grinding force components were carried out. The tests were realized in the deep-grinding grinding process of Inconel 718 with a grinding wheel made of mixture of sintered alumina and ruby corundum.

Słowa kluczowe

EN

grinding; creep-feed grinding; CFG; surface quality; grinding speed

PL

szlifowanie; szlifowanie z posuwem pełzającym; CFG; jakość powierzchni; prędkość szlifowania

• Wydawca: Wydawnictwo Uczelniane Politechniki Koszalińskiej
• Czasopismo: Journal of Mechanical and Energy Engineering
• Rocznik: 2018
• Tom: Vol. 2, No 4
• Strony: 285--290
• Opis fizyczny: Bibliogr. 16 poz., rys., tab., wykr.

Twórcy

autor

Żyłka Ł.

• Rzeszow University of Technology, The Faculty of Mechanical Engineering and Aeronautics, Department of Manufacturing Techniques and Automation

autor

Płodzień M.

• Rzeszow University of Technology, The Faculty of Mechanical Engineering and Aeronautics, Department of Manufacturing Techniques and Automation

autor

Babiarz R.

• Rzeszow University of Technology, The Faculty of Mechanical Engineering and Aeronautics, Department of Manufacturing Techniques and Automation

Bibliografia

• 1. Bhaduri D., Soo S.L., Novovic D., Aspinwall D.K., Harden P., Waterhouse C., Bohr S., Mathieson A.C., Lucas M. (2013). Ultrasonic Assisted Creep Feed Grinding of Inconel 718. Procedia CIRP, Vol. 6, pp. 615-620.
• 2. Cameron A., Bauer R., Warkentin A. (2010). An investigation of the effects of wheel-cleaning parameters in creep-feed grinding. International Journal of Machine Tools and Manufacture. Vol. 50, No. 1, pp. 126-130.
• 3. Çolak O. (2012). Investigation on Machining Performance of Inconel 718 under High Pressure Cooling Conditions. Journal of Mechanical Engineering, Vol. 58, No. 11, pp. 683-690.
• 4. Ezugwu E. O., Bonney J., Yamane Y. (2003). An overview of the machinability of aeroengine alloys. Journal of Materials Processing Technology, Vol. 134, No. 2, pp. 233-253.
• 5. Ezugwu E. O., Z. Wang M., Machado A. R. (1999). The machinability of nickel-based alloys: a review. Journal of Materials Processing Technology, Vol. 86, pp. 1-16.
• 6. Heinzel C., Antsupov G. (2012). Prevention of wheel clogging in creep feed grinding by efficient tool cleaning. CIRP Annals, Vol. 61, No. 1, pp. 323-326.
• 7. Klocke F., Soo S. L., Karpuschewski B., Webster J. A., Novovic D., Elfizy A., Axinte D. A., Tönissen S. (2015). Abrasive machining of advanced aerospace alloys and composites. CIRP Annals - Manufacturing Technology, Vol. 64, No. 2, pp. 581-604.
• 8. Maksoud T. M. A. (2005). Heat transfer model for creep-feed grinding. Journal of Materials Processing Technology, Vol. 168, No. 3, pp. 448–463.
• 9. Malkin S., Guo Ch. (2008). Grinding Technology. Theory and Applications of Machining with Abrasives, Industrial Press, New York, USA.
• 10. Marinescu I. D., Hitchiner M., Uhlmann E., Rowe W. B., Inasaki I. (2007). Handbook of Machining with Grinding Wheels, CRC Press, Boca Raton, FL.
• 11. Ortega N., Bravo H., Pombo I., Sánchez J.A., Vidal G. (2015). Thermal Analysis of Creep Feed Grinding. Procedia Engineering, Vol. 132, pp. 1061-1068.
• 12. Pei-Lum T. (1995). Study on the grinding of Inconel 718. Journal of Materials Processing technology, Vol. 55, pp. 421-426.
• 13. Sedighi M., Afshari D. (2010). Creep feed grinding optimization by an integrated GA-NN system, Journal of Intelligent Manufacturing, Vol. 21, No. 6, pp. 657-663.
• 14. Wenfeng Ding, Jiuhua Xu, Zhenzhen Chen, Honghua Su, Yucan Fu (2010). Grindability and Surface Integrity of Cast Nickel-based Superalloy in Creep Feed Grinding with Brazed CBN Abrasive Wheels. Chinese Journal of Aeronautics, Vol. 23, No. 4, pp. 501-510.
• 15. Xu X. P., Yu Y. Q., Xu H. J. (2002). Effect of Grinding Temperatures on the Surface Integrity of a Nickel-Based Alloy. Journal of Materials Processing Technology, Vol. 129, pp. 359-353.
• 16. Zheng Jian-xin, Xu Jia-wen (2006). Experimental Research on the Ground Surface Quality of Creep Feed Ultrasonic Grinding Ceramics (Al2O3). Chinese Journal of Aeronautics, Vol. 19, No. 4, pp. 359-365.

Uwagi

PL

Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2019).