Identyfikatory
Warianty tytułu
Zarządzanie ryzykiem : nowy przegląd literatury
Języki publikacji
Abstrakty
The complexity of the industrial activities and the important mass of flows crossing the supply chain promotes the emergence of risks that must be considered in the decision process. For this reason, we have developed this paper to clarify the basics of risk management through a short new suggestion of literature review for risk management. Our justification of this attempt is that this area is the most discussed in our days and it is impossible to present all definition of the risk concept, we have tried to collect the most recent studies in this paper.
Złożoność działalności przemysłowej i istotność masy przepływów w łańcuchu dostaw sprzyja powstawaniu zagrożeń, które należy uwzględnić w procesie decyzyjnym. Z tego powodu, opracowany został ten artykuł w celu wyjaśnienia podstaw zarządzania ryzykiem poprzez nową propozycję przeglądu literatury w zakresie zarządzania ryzykiem. Uzasadnieniem dla krótkiego przeglądu jest to, że obszar ten jest często podejmowany w naszych czasach, a przedstawienie wszystkich definicji pojęcia ryzyka nie jest możliwe, dlatego też staraliśmy się zebrać najnowsze opracowania w badanym zakresie.
Słowa kluczowe
Czasopismo
Rocznik
Tom
Strony
288--297
Opis fizyczny
Bibliogr. 37 poz.
Twórcy
autor
- Unit of Logistic, Industrial and Quality Management ; High Institute of Industrial Management of Sfax ; University of Sfax, Sfax, Tunisia
Bibliografia
- [1]. Kutlu A. Can, Ekmekçioglu M., Fuzzy failure modes and effects analysis by using fuzzy TOPSIS-based fuzzy AHP, Expert Systems with Applications (39), 61–67, 2012
- [2]. Fekete A., Safety and security target levels: Opportunities and challenges for risk management and risk communication, International Journal of Disaster Risk Reduction (2) 67–76, 2012
- [3]. KarimiAzari A., Mousavi N., Mousavi F., Hosseini S., Risk assessment model selection in construction industry, Expert Systems with Applications (38), 9105–9111, 2011
- [4]. Xanthopoulos A., Vlachos D., Lakovou E., Optimal newsvendor policies for dual sourcing supply chains: A disruption risk management framework, Computers and Operations Research (39), 350–357, 2012
- [5]. Bakr A.F., El Hagla K., Nayer A., Rawash A., Heuristic approach for risk assessment modeling: EPCCM application (Engineer Procure Construct Contract Management), Alexandria Engineering Journal (51), 305–323, 2012
- [6]. Harland C., Brenchley R., Walker H., Risk in supply networks, Journal of Purchasing and Supply Management (9), 51–62, 2003
- [7]. Sofyalioglu C., Kartal B., The selection of global supply chain risk management strategies by using fuzzy analytical hierarchy process a case from Turkey, Procedia-Social and Behavioral Sciences (58), 1448–1457, 2012
- [8]. Tang C., Perspectives in supply chain risk management, International Journal of Production Economics, Volume 103, 451–488, 2006
- [9]. Aloini D., Dulmin R., Mininno V., Modelling and assessing ERP project risks: A Petri Net approach, European Journal of Operational Research 220 (2012) 484–495.
- [10]. Tuncel G., Alpan G., Risk assessment and management for supply chain networks: A case study, Computers in Industry (61), 250–259, 2010
- [11]. Si H., Ji H., Zeng X., Quantitative risk assessment model of hazardous chemicals leakage and application, Safety Science (50), 1452–1461, 2012
- [12]. Liu H.C., Liu L., Liu N., Risk evaluation approaches in failure mode and effects analysis: A literature review, Expert Systems with Applications (40), 828–838, 2013
- [13]. Liu H.C., Liu L., Liu N., Mao L.X., Risk evaluation in failure mode and effects analysis with extended VIKOR method under fuzzy environment, Expert Systems with Applications (39), 12926–12934, 2012
- [14]. Veland H., Aven T., Risk communication in the light of different risk erspectives, Reliability Engineering and System Safety 110 (2013) 34–40
- [15]. Sun J., Matsui M., Yin Y., Supplier risk management: An economic model of P-chart considered due-date and quality risks, International Journal of Production Economics (139), 58–64, 2012
- [16]. Thun J.H., Hoenig D., An empirical analysis of supply chain risk management in the German automotive industry, International Journal of Production Economics (131), 242–249, 2011
- [17]. Cicek K., Celik M., Application of failure modes and effects analysis to main engine crankcase explosion failure on-board ship, Safety Science (51), 6–10, 2013
- [18]. Ma L., Li Y., Liang L., Li M., Cheng L., A novel method of quantitative risk assessment based on grid difference of pipeline sections, Safety Science xxx (2013) xxx–xxx, (Article in press)
- [19]. Peng-cheng L., Guo-hua C., Li-cao D., Li Z., A fuzzy Bayesian network approach to improve the quantification of organizational influences in HRA frameworks, Safety Science (50), 1569–1583, 2012
- [20]. Perrin L., Muñoz-Giraldo F., Dufaud O., Laurent A., Normative barriers improvement through the MADS/MOSAR methodology, Safety Science (50), 1502–1512, 2012
- [21]. Zhao L., Wang X., Qian Y., Analysis of factors that influence hazardous material transportation accidents based on Bayesian networks: A case study in China, Safety Science (50), 1049–1055, 2012
- [22]. Deublein M., Schubert M., Adey B.T., Köhler J., Faber M.H., Prediction of road accidents: A Bayesian hierarchical approach, Accident Analysis and Prevention (51), 274–291, 2013
- [23]. Giannakis M., Louis M., A multi-agent based frame work for supply chain risk management, Journal of Purchasing and Supply Management (17), 23–31, 2011
- [24]. Tsai M.C., Lai K.H., Lloyd A.E., Lin H.J., The dark side of logistics outsourcing-Unraveling the potential risks leading to failed relationships, Transportation Research Part E (48), 178-189, 2012
- [25]. Mazouni M.H, Pour une Meilleure Approche du Management des Risques : De la Modélisation Ontologique du Processus Accidentel au Système Interactif d’Aide à la Décision, Thèse de Doctorat de l’Institut National Polytechnique de Lorraine, Université de Nancy, 2008
- [26]. Lavastre O., Gunasekaran A., Spalanzani A., Supply chain risk management in French companies, Decision Support Systems 52, 828–838, 2012.
- [27]. Lavastre O., Spalanzani A., Comment gérer les risques liés à la chaîne logistique ? Une réponse par les pratiques de SCRM (Supply Chain Risk Management), Cahier de recherche n°2010-02 E5, CERAG, 2010.
- [28]. Tang O., Musa S.W., Identifying risk issues and research advancements in supply chain risk management, International Journal of Production Economics (133), 25–34, 2011
- [29]. Marhavilas P.K., Koulouriotis D.E., Developing a new alternative risk assessment framework in the work sites by including a stochastic and a deterministic process: A case study for the Greek Public Electric Power Provider, Safety Science (50), 448–462, 2012
- [30]. Olsson R., In search of opportunity management: Is the risk management process enough?, International Journal of Project Management (25), 745–752, 2007
- [31]. Alhawari S., Karadsheh L., Talet A.N., Mansour E., Knowledge-Based Risk Management framework for Information Technology project, International Journal of Information Management (32), 50–65, 2012
- [32]. García-Herrero S., Mariscal M.A., Gutiérrez J.M., Toca-Otero A., Bayesian network analysis of safety culture and organizational culture in a nuclear power plant, Safety Science (53), 82–95, 2013
- [33]. Zegordi S. H., Davarzani H., Developing a supply chain disruption analysis model: Application of colored Petri-nets, Expert Systems with Applications 39 (2012) 2102–2111
- [34]. Aven T., The risk concept-historical and recent development trends, Reliability Engineering and System Safety (99), 33–44, 2012
- [35]. Cheng T.C.E., Yip F.K., Yeung A.C.L., Supply risk management via guanxi in the Chinese business context: The buyer’s perspective, International Journal of Production Economics (139), 3–13, 2012
- [36]. Ennouri W., Frikha A., Chabchoub H., Risks management in Tunisian industry: case study, the International Conference on Advanced Logistics and Transport (ICALT’2013), 2013
- [37]. Yang Y.C., Risk management of Taiwan’s maritime supply chain security, Safety Science (49), 382–393, 2011
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-c18616d2-64b5-417e-9a5a-5cfcbdeecb9e