Selected aspects of production control a crankshaft with a free forging method TR

• Autorzy: Pacana A. , Czerwińska K.
• Języki publikacji: EN

Abstrakty

EN

The quality evaluation shall be the primary objective of acceptance testing of forgings for crankshafts. This paper presents technological issues concerning the production of crankshafts. It also characterizes and presents the scope of application of free forging and discusses the properties of steel used in crankshafts. The research part of the paper includes the analysis of selected test methods for determining the quality of forgings intended for crankshafts.

Słowa kluczowe

EN

forging; crankshaft; free forging by TR method

PL

kucie; wał korbowy; kucie swobodne; kucie metodą TR

• Wydawca: Polskie Towarzystwo Zarządzania Produkcją
• Czasopismo: Zarządzanie Przedsiębiorstwem
• Rocznik: 2018
• Tom: Vol. 21, nr 1
• Strony: 21--25
• Opis fizyczny: Bibliogr. 17 poz., il., fot., 1 wykr.

Twórcy

autor

Pacana A.

• Politechnika Rzeszowska im. Ignacego Łukasiewicza, al. Powstańców Warszawy 12, 35-959 Rzeszów, Poland

autor

Czerwińska K.

• Politechnika Rzeszowska im. Ignacego Łukasiewicza, al. Powstańców Warszawy 12, 35-959 Rzeszów, Poland

Bibliografia

• [1] Babica M., Pająk E., Concept of the method of elimination of inconsistencies in production processes, Scientific Notebooks of the Rzeszów University of Technology, Machine Construction and Production Management, Publishing Office of the Rzeszów University of Technology, Rzeszów, 2006.
• [2] Czerwińska K., Pacana A., Application eddy currents in the control quality piston Diesel, International Journal Of Interdisciplinarity In Theory And Practice, Wydawnictwo ITPB, http://www.itpb.eu/, ITPB 11/2016.
• [3] Rehmus-Forc A., Problems of acceptance tests of forgings for shafts of steam turbines, Technical journal Mechanics, notebook 6, 2009.
• [4] Rut T., Walczyk W., Development of forging in press tools and equipment – Method TR. Matt. Conf. MANUFACTURING’01 Contemporary Manufacturing Problem, Poznań, Vol. 1, 8–9 November 2001.
• [5] Rut T., Walczyk W., Development of forging in press tools, Method TR. Matt. Conf. Interior: Interior Conf. Science and Technology “Construction and technology of extrusions and mouldings”, Poznań-Wąsowo, 14–16 June 2004.
• [6] Materials unpublished Smithy Stalowa Wola, Stalowa Wola, 2017.
• [7] Sęp J., Pacana A., Methods and tools of quality improvement, Vol. 3 in the series Design and implementation of quality systems, Vol. 3, OWPRz, Rzeszów, 2001.
• [8] Siemiątkowski Z., Selected issues of production of crankshaft monolithic forgings for marine engines and generators, [in:] Logistics, Institute of Logistics and Warehousing, no. 6, 2010.
• [9] Sińczak J., Basics of plastic processing processes, AKAPIT Scientific Publishing House, Kraków, 2010.
• [10] Sińczak J., Łukaszek A., Tool load with multiple forging of the roller bearing rings, Plastic Working of Metals, 12, 2001.
• [11] Urbaniak M., Quality management. Theory and practice, Difin, Warsaw, 2004.
• [12] Walenty J., Manufacturing techniques – materials for students, West Pomeranian University of Technology in Szczecin, Szczecin, 2010.
• [13] Wolniak R., Skotnicka-Zasadzień B., Quality management for engineers, Publishing House of the Silesian University of Technology, Gliwice, 2010.
• [14] www.stalnierdzewna.com [readout 06.05.2018].
• [15] www.metale.org [readout 06.05.2018].
• [16] www.hsw-kuznia.pl/ [readout 06.05.2018].
• [17] www.stalespecjalne.com.pl [readout 06.05.2018].

Uwagi

Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2018).