PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Bierne zabezpieczenia ogniochronne słupów żeliwnych

Autorzy
Identyfikatory
Warianty tytułu
EN
Passive fire protections of cast iron columns
Języki publikacji
PL
Abstrakty
PL
W artykule zaprezentowano wyniki badania odporności ogniowej obciążonego słupa żeliwnego o przekroju okrągłym zamkniętym (CHS), zabezpieczonego zaprawą ogniochonną. Ponadto badaniu poddano słupy nieobciążone zabezpieczone tą samą zaprawą w celu określenia wpływu obciążenia na skuteczność ogniochronną materiału oraz dwa kolejne słupy nieobciążone, zabezpieczone inną zaprawą ogniochronną. Uzyskane wyniki pokazują, że słupy żeliwne mogą być zabezpieczane ogniochronnie nie tylko reaktywnymi, ale także biernymi materiałami ogniochronnymi. Wymagana grubość izolacji może być ustalana na podstawie tablic uzyskanych w badaniach elementów stalowych, zgodnie z EN 13381. Metody określenia temperatury krytycznej stali, podane m.in. w normie EN 1993-1-2, mogą być z powodzeniem stosowane także w odniesieniu do konstrukcji żeliwnych.
EN
This study presents the results of fire resistance tests of a loaded cast iron column with circular hollow sections (CHS), protected against fire with fire protection mortar. In addition, unloaded columns, protected with the same mortar, were tested in order to determine the relationship between the load and fire protection efficiency. Also, two more unloaded columns were added, which were protected with a different type of fire protection mortar. The results obtained indicate that cast iron columns may be protected not only with reactive, but also with passive fire protection materials. The required fire protection thickness may be determined based on tables from tests of steel elements pursuant to the EN 13381 European Standard System. The existing methods for the determination of the critical temperature of steel, provided i.a. in EN 1993-1-2, may also be successfully used for cast iron structures.
Rocznik
Tom
Strony
17--21
Opis fizyczny
Bibliogr. 22 poz., il., tab.
Bibliografia
  • [1] Maraveas C., Wang Y.C., Swailes T., Sotiriadis G. An experimental investigation of mechanical properties of structural cast iron at elevated temperatures and after cooling down, Fire Saf. J. 71 (2015) 340-352. https://doi.org/10.1016/j.firesaf. 2014.11.026.
  • [2] Maraveas C., Wang Y.C., Swailes T. Elevated temperature behaviour and fire resistance of cast iron columns, Fire Saf. J. 82 (2016) 37-48. https://doi.org/10.1016/j.firesaf.2016.03.004.
  • [3] Franssen J.M., Kodur V , Zaharia R. Designing Steel Structures for Fire Safety, CRC Press, 2009. https://doi.org/10.1201/9780203875490.
  • [4] Wald F., Dagefa M. Fire resistance of cast iron columns. J. Struct. Fire Eng. 2013; 4: 95 - 102. https://doi.org/10.1260/2040-2317.4.2.95.
  • [5] Wald F., Dagefa M. Fire resistance of cast iron columns, in: Appl. Strctural Fire Eng. 2011: 443 - 448. https://doi.org/10.1260/2040-2317.4.2.95.
  • [6] CEN, EN 13381-4:2013. Test methods for determining the contribution to the fire resistance of structural members. Applied passive protection products to steel members, (2013).
  • [7] CEN, EN 13381-8:2013. Test methods for determining the contribution to the fire resistance of structural members. Applied reactive protection to steel members, (2013).
  • [8] CEN, EN 1993-1-1:2005+A1:2014. Eurocode 3. Design of steel structures. General rules and rules for buildings, (2014).
  • [9] CEN, EN 1993-1-2:2005. Eurocode 3. Design of steel structures. General rules, (2005).
  • [10] Porter A., Wood C., Fidler J., McCaig I. The behavior of structural cast iron in fire, in: English Herit. Res. Trans. 1998; 1: 11 - 20.
  • [11] Łukomski M., Turkowski P., Roszkowski P., Papis B. Fire Resistance of Unprotected Steel Beams-Comparison between Fire Tests and Calculation Models, Procedia Eng. 2017; https://doi.org/10.1016/j.proeng. 2017.02.078.
  • [12] Czapliński K. Obliczanie dawnych konstrukcji z żeliwa i stali, Wiadomości Konserw. 2009; 26: 559 - 564.
  • [13] Rondal J., Rasmussen K.J. On the Strength of Cast Iron Columns (Research Report No R829), Sydney, 2003.
  • [14] EOTA, EAD 350402-00-1106. Fire protective products. Reactive coatings for fire protection of steel elements, (2017).
  • [15] de Silva D., Bilotta A., Nigro E. Approach for modelling thermal properties of intumescent coating applied on steel members, Fire Saf. J. 2020; 116: 103200. https://doi.org/10.1016/j.firesaf.2020.103200.
  • [16] Anderson C.E., Dziuk J., Mallow W.A., Buckmaster J. Intumescent reaction mechanisms, 1985. https://doi.org/10.1177/073490418500300303.
  • [17] Lucherini A., Costa R.I., Giuliani L., Jomaas G. Experimental Study of the Behavior of Steel Structures Protected by Different Intumescent Coatings and Exposed to Various Fire Scenarios, in: Struct. Fire 2016. Proc. 9th Int. Conf. Struct. Fire, DEStech Publications, Inc., 2016: pp. 1065-1072.
  • [18] Lucherini A., Giuliani L., Jomaas G. Experimental study of the performance of intumescent coatings exposed to standard and non-standard fire conditions, Fire Saf. J. 2018; 95: 42-50. https://doi.org/10.1016/j.firesaf. 2017.10.004.
  • [19] Lucherini A., Torero J.L., Maluk C. Effects of substrate thermal conditions on the swelling of thin intumescent coatings, Fire Mater. 2020: 1-14, https://doi.org/10.1002/fam.2840.
  • [20] Bailey C. Indicative fire tests to investigate the behaviour of cellular beams protected with intumescent coatings, Fire Saf. J. 2004; 39: 689 - 709. https://doi.org/10.1016/j.firesaf.2004.06.007.
  • [21] CEN, EN 1363-1:2020. Fire resistance tests. General requirements, (2020).
  • [22] Dumont F., Boström L., Łukomski M., van den Berg G. Summary report of the EGOLF round-robin Nr TC2 14-1 in fire resistance testing, 2015.
Uwagi
Opracowanie rekordu ze środków MEiN, umowa nr SONP/SP/546092/2022 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2022-2023).
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-c143525d-1281-4e03-a4e6-25392cd56f35
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.