Tytuł artykułu
Autorzy
Treść / Zawartość
Pełne teksty:
Identyfikatory
Warianty tytułu
Języki publikacji
Abstrakty
In order to analyze the impact angle of pick cutter, the angle of alloy head and the cutting line spacing on rock breaking effect, the three-dimensional model of rock cutting by pick cutter was established by solidworks, and the three-dimensional finite element model of rock breaking by pick cutter based on penetration failure and compression damage was established by using dynamic simulation software ANSYS/LS-DYNA. For the drum with a diameter of 1200 mm, a length of 900 mm and a rotational speed of 30 rot/min, when the impact angles of the picks are 30°, 37°, 45° and 52°, the angles of the alloy heads are 70°, 80°, 90° and 100°, and the intercept distances are 250 mm, 275 mm, 300 mm and 325 mm, the rock breaking simulation based on the finite element analysis software is carried out, and the load and specific energy consumption of the drum are obtained. Finally, through the analysis and comparison, the existing parameters are optimized, and a better parameter model is obtained.
Czasopismo
Rocznik
Tom
Strony
45--62
Opis fizyczny
Bibliogr. 15 poz., rys., tab.
Twórcy
autor
- College of Electromechanical Engineering, Changsha University, Changsha, 410022, China
autor
- College of Electromechanical Engineering, Changsha University, Changsha, 410022, China
autor
- College of Electromechanical Engineering, Changsha University, Changsha, 410022, China
autor
- College of Electromechanical Engineering, Changsha University, Changsha, 410022, China
Bibliografia
- DU C.-L., LIU S.-Y., CUI X.-X., and LI T.-J., 2008, Study on pick arrangement of shearer drum based on load fluctuation. Journal of China University of Mining & Technology(2). doi:10.1016/S1006-1266(08)60065-6.
- CHELUSZKA P., 2020, Optimization of the Cutting Process Parameters to Ensure High Efficiency of Drilling Tunnels and Use the Technical Potential of the Boom-Type Roadheader, Energies, 13 (24).
- LIU G.M., 2021, Discussion and Analysis of Hydraulic System of Cantilever Roadheader for Coal Mine, Rock Drilling Machinery and Pneumatic Tools, 47 (04), 30, 32, 35, DOI: 10.19449/j.cnki.2095-6282.2021.04.006.
- KOLESNICHENKO I.E., KOLESNICHENKO E.A., ARTEMIEV V.B., 2017, Theoretical Studies of Dust-Raising Characteristics of Heading Machines, Procedia Engineering, 206.
- LI J.P., DU C.L. and JIANG H.X., 2011, Optimization Mathematic Model of the Arrangement of Aiguilles Cutting Picks. Advanced Materials Research, (199–200). DOI: 10.4028/www.scientific.net/AMR. 199-200.1102.
- MIAO J.J,, LONG R.S., 2015, Finite Element Analysis of Motor Box for EBZ160 Horizontal Roadheader, Advanced Materials Research, 3852, 1090–1090.
- LI X.Y., LV Y.G., JIANG S.B., and ZENG Q.L., 2016, Effects of spiral line for pick arrangement on boom type roadheader cutting load. International Journal of Simulation Modelling, (1).
- DOLIPSKI M., CHELUSZKA P., SOBOTA P., REMIORZ E., 2017, New Computer Simulation Procedure of Heading Face Mining Process with Transverse Cutting Heads for Roadheader Automation, Archives of Mining Sciences, 62 (1).
- COMAKLI R., 2019, Performance of roadheaders in low strength pyroclastic rocks, a case study of cold storage caverns in Cappadocia, Tunnelling and Underground Space Technology Incorporating Trenchless Technology Research, 89.
- LIU S., JI H., and LIU X., 2017, Effect of pick working angle on the cutting performance of a cutting head, Journal of the Brazilian Society of Mechanical Sciences and Engineering, (10), DOI: 10.1007/s40430-017-0806-9.
- ZHANG W.T., Zhai G.D., YUE Z.W., PAN T., CHENG R., 2021, Research on Visual Positioning of a Roadheader and Construction of an Environment Map, Applied Sciences, 11 (11).
- DU X., MING Y., BING H., 2013, Analysis of Cutting Pick Stress with Different Cutting Linear Velocity, Coal Mine Machinery, 34 (11), 91–92. DOI: 10.13436/j.mkjx.2013.11.077.
- XU Y.D., 2021, Effect of cutting angle on the performance of the head of a roadheader, Journal of Mechatronics and Artificial Intelligence in Engineering, 2 (1).
- MENGQI Z., XIANGUO Y., and Guoqiang Q., 2021, A new method for roadheader pick arrangement based on meshing pick spatial position and rock cutting verification, PloS one (11), DOI: 10.1371/JOURNAL.PONE.0260183.
- LIU Z.H., DU C.L., ZHENG Y.L., ZHANG Q.B., ZHAO J., 2017, Effects of nozzle position and waterjet pressure on rock-breaking performance of roadheader, Tunnelling and Underground Space Technology Incorporating Trenchless Technology Research, 69.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-c0e61398-df5e-4a51-9a20-7d4c623919da