Powiadomienia systemowe
- Sesja wygasła!
Identyfikatory
Warianty tytułu
Języki publikacji
Abstrakty
In this paper the results of experimental studies concerning the phenomenon of initial period of the wear of differently coated sintered carbide tools when dry orthogonal cutting of an AISI 321 austenitic stainless steel are presented. The motivation for this study results from the lack of technological guides concerning the optimal choice of coated cutting tools for machining of corrosion resistant austenitic stainless steels. A number of cutting tool inserts with the plane rake face made of a fine H10F sintered carbide substrate with specially deposited TiN, including TiCN, TiAlN, AlTiN and AlCrN single layers were used in wear tests. Both rake and flank faces of the cutting inserts were examined by optical and confocal microscopy after controlled tool wear. The possible wear mechanisms in terms of changes of the tool-chip contact were investigated.
Słowa kluczowe
Czasopismo
Rocznik
Tom
Strony
37--45
Opis fizyczny
Bibliogr. 16 poz., tab., rys.
Twórcy
autor
- Opole University of Technology, Faculty of Mechanical Engineering, Opole, Poland
autor
- Opole University of Technology, Faculty of Mechanical Engineering, Opole, Poland
Bibliografia
- [1] BOUZAKIS K.D., MICHAILIDIS N., SKORDARIS G., BOUZAKIS E., BIERMANN D., M'SAOUBI R., 2012, Cutting with coated tools: Coating technologies, characterization methods and performance optimization, CIRP Annals - Manufacturing Technology, 61/2, 703-723.
- [2] DOBRZAŃSKI L.A., MIKUŁA J., 2005, Structure and properties of PVD and CVD coated Al2O3 + TiC mixed oxide tool ceramics for dry on high speed cutting processes, Journal of Materials Processing Technology, 164-165, 822-831.
- [3] FOX-RABINOVICH G.S., YAMAMOTO K., AGUIRRE M.H., CAHILL D.G., VELDHUIS S.C., BIKSA A., DOSBAEVA G., SHUSTER L.S., 2010, Multi-functional nano-multilayered AlTiN/Cu PVD coating for machining of Inconel 718 superalloy, Surface & Coatings Technology, 204, 2465-2471.
- [4] GRZESIK W., 2000, An integrated approach to evaluating the tribo-contact for coated cutting inserts, Wear, 240, 9-18.
- [5] GRZESIK W., 2003, Advanced protective coatings for manufacturing and engineering, Hanser Gardner Publications, Cincinnati.
- [6] GRZESIK W., 2010, Fundamentals of machining of metallic materials, WNT, Warszawa (in Polish).
- [7] GRZESIK W., NIESŁONY P., 2004, Prediction of friction and heat flow in machining incorporating thermophysical properties of the coating–chip interface, Wear, 256, 108-117.
- [8] KALSS W., REITER A., DERFLINGER V., GEY C., ENDRINO J.L., 2006, Modern coatings in high performance cutting applications, International Journal of Refractory Metals & Hard Materials, 24, 399-404.
- [9] KUPCZYK M., 2008, Surface engineering– wear resistant coatings for cutting tools, Wydawnictwo Politechniki Poznanskiej, Poznan (in Polish).
- [10] KUPCZYK M., 2009, Production and exploatation of cutting tools with wear resistant coatings, Wyd. Politechniki Poznanskiej, Poznan (in Polish).
- [11] LI B., 2012, A review of tool wear estimation using theoretical analysis and numerical simulation technologies, Int. Journal of Refractory Metals and Hard Materials, 35, 143-151.
- [12] M’SAOUBI R., CHANDRASEKARAN H., 2004, Investigation of the effects of tool micro-geometry and coating on tool temperature during orthogonal turning of quenched and tempered steel, International Journal of Machine Tools & Manufacture, 44, 213-224.
- [13] Machining:Products and services, 2011, Catalog for Oerlikon Balzers.
- [14] PRENGEL H.G., JINDAL P.C., WENDT K.H., SANTHANAM A.T., HEGDE P.L., 2001, A new class of high performance PVD coatings for carbide cutting tools, Surface and Coatings Technology, 139, 25-34.
- [15] RECH J., 2006, Influence of cutting tool coatings on the tribological phenomena at the tool–chip interface in orthogonal dry turning, Surface & Coatings Technology, 200, 5132-5139.
- [16] RECH J., KUSIAK A., BATTAGIA J.L., 2004, Tribological and thermal functions of cutting tool coatings, Surface & Coatings Technology, 186, 364-371.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-c08dbd9e-2444-4164-802d-694063fbac05