PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Research on vibration evolution of a ball bearing without the cage under local variable-diameter raceway damage

Treść / Zawartość
Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
This article presents an analysis of vibration evolution of a ball bearing without the cage. A vibration model in which time-varying displacement, time-varying stiffness, contact force and collision force are comprehensively considered, is proposed. On this basis, the law of motion of the bearing is studied. It is shown that a variable-diameter raceway affects the radius of curvature, which effects the dispersion of rolling elements. The damaged variable -diameter raceway leads to discrete failure, contact force and collision force of rolling elements, which are main reasons that cause vibration mutation. The bearing motion changes from quasi-periodic to chaotic motion.
Rocznik
Strony
129--146
Opis fizyczny
Bibliogr. 16 poz., rys., tab.
Twórcy
autor
  • Key Laboratory of Advanced Manufacturing Intelligent Technology Ministry of Education, Harbin University of Science and Technology, Harbin, China
autor
  • Key Laboratory of Advanced Manufacturing Intelligent Technology Ministry of Education, Harbin University of Science and Technology, Harbin, China
  • Key Laboratory of Advanced Manufacturing Intelligent Technology Ministry of Education, Harbin University of Science and Technology, Harbin, China
Bibliografia
  • 1. Behzad M., Bastami A.R., Mba D., 2011, A new model for estimating vibrations generated in the defective rolling element bearings, Journal of Vibration and Acoustics – Transactions of the ASME, 133, 4, 041011.
  • 2. Cui L.L., Jin Z., Huang J.F., Wang H.Q., 2019, Fault severity classification and size estimation for ball bearings based on vibration mechanism, IEEE Access, 7, 56107-56116.
  • 3. Fan J., Cui W., Han Q.K., 2017, Vibration signal modeling of a localized defective rolling bearing under unbalanced force excitations, Journal of Vibroengineering, 19, 7, 5009-5019.
  • 4. Khanam S., Dutt J.K., Tandon N., 2015, Impact force based model for bearing local fault identification, Journal of Vibration and Acoustics – Transactions of the ASME, 137, 5, 051002.
  • 5. Liu J., Tang C.K., Shao Y.M., 2019, An innovative dynamic model for vibration analysis of a flexible rolling element bearing, Mechanism and Machine Theory, 135, 27-39.
  • 6. Liu J., Wu H., Shao Y.M., 2018, A theoretical study on vibrations of a ball bearing caused by a dent on the races, Engineering Failure Analysis, 83, 220-229.
  • 7. Liu Y.Q., Chen Z.G., Wang K.Y., Zhai W.M., 2022, Surface wear evolution of traction motor bearings in vibration environment of a locomotive during operation, Science China – Technological Sciences, 65, 4, 920-931.
  • 8. McFadden P.D., Smith J.D., 1984, Model for the vibration produced by a single point-defect in a rolling element, Journal of Sound and Vibration, 96, 1, 69-82.
  • 9. Parmar V., Saran V.H., Harsha S.P., 2021, Effect of dynamic misalignment on the vibration response, trajectory followed and defect-depth achieved by the rolling-elements in a double-row spherical rolling-element bearing, Mechanism and Machine Theory, 162, 104366.
  • 10. Shah D.S., Patel V.N., 2019, A dynamic model for vibration studies of dry and lubricated deep groove ball bearings considering local defects on races, Measurement, 137, 535-555.
  • 11. Xi S.T., Cao H.R., Chen X.F., 2019, Dynamic modeling of spindle bearing system and vibration response investigation, Mechanical Systems and Signal Processing, 114, 486-511.
  • 12. Yang Y., Ouyang J., Wu X.L., Jin Y.L., Yang Y.R., Cao D.Q., 2019, Bending-torsional coupled vibration of a rotor-bearing-system due to blade-casing rub in presence of non-uniform initial gap, Mechanism and Machine Theory, 140, 170-193.
  • 13. Yang Y.Z., Yang W.G., Jiang D.X., 2018, Simulation and experimental analysis of rolling element bearing fault in rotor-bearing-casing system, Engineering Failure Analysis, 92, 205-221.
  • 14. Zhao Y.L., Wang Q.Y., Wang M.Z., Pan C.Y., Bao Y.D., 2022, Discrete theory of rolling elements for a cageless ball bearing, Journal of Mechanical Science and Technology, 36, 4, 1921-1933.
  • 15. Zhao Y.L., Zhang J.W., Zhou E.W., 2021, Automatic discrete failure study of cage free ball bearings based on variable-diameter contact, Journal of Mechanical Science and Technology, 35, 11, 4943-4952.
  • 16. Zheng L.K., Xiang Y., Sheng C.X., 2021, Nonlinear dynamic modeling and vibration analysis of faulty rolling bearing based on collision impact, Journal of Computational and Nonlinear Dynamics, 16, 6, 061001.
Uwagi
Opracowanie rekordu ze środków MEiN, umowa nr SONP/SP/546092/2022 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2022-2023).
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-bfeeb061-c3dd-4f10-bd72-ee0ac9328008
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.