Precise Orientation Control of Single Crystalline NiMnGa-Based Alloys by in-situ EBSD Analysis

• Autorzy: Szewczyk Arkadiusz , Faryna Marek , Wójcik Anna , Maziarz Wojciech , Chulist Robert

Identyfikatory

DOI

10.24425/amm.2023.145490

• Języki publikacji: EN

Abstrakty

EN

The article presents a precise method for the orientation process of NiMnGa-based single crystals. For this method, a scanning electron microscope equipped with an EBSD camera and a heating stage allowing temperatures exceeding 873 K was used. The orientation process was carried out in both the high-temperature austenite phase and in the room-temperature martensite phase. The facilities allowed for determining the orientation of a single grain of austenite at elevated temperatures as well as the orientation of particular martensitic variants at room temperature. A practically perfect cubic orientation was obtained in the austenitic case with a deviation of about 1° while the samples oriented in the martensitic phase deviated from the desired orientation by 4.5-5.2°. Additionally, the training process of single crystals was carried out in order to show the influence of the orientation process on twinning stress.

Słowa kluczowe

EN

orientation; monocrystal; EBSD; austenite; martensite

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2023
• Tom: Vol. 68, iss. 3
• Strony: 1171--1175
• Opis fizyczny: Bibliogr. 37 poz., rys.

Twórcy

autor

Szewczyk Arkadiusz

• Institute of Metallurgy and Materials Science, Polish Academy of Sciences, 25 Reymonta Str., 30-059, Kraków, Poland

• https://orcid.org/0000-0001-7658-0628

autor

Faryna Marek

• Institute of Metallurgy and Materials Science, Polish Academy of Sciences, 25 Reymonta Str., 30-059, Kraków, Poland

• https://orcid.org/0000-0002-0537-5448

autor

Wójcik Anna

• Institute of Metallurgy and Materials Science, Polish Academy of Sciences, 25 Reymonta Str., 30-059, Kraków, Poland

• https://orcid.org/0000-0002-1774-751X

autor

Maziarz Wojciech

• Institute of Metallurgy and Materials Science, Polish Academy of Sciences, 25 Reymonta Str., 30-059, Kraków, Poland

• https://orcid.org/0000-0001-8363-9640

autor

Chulist Robert

• Institute of Metallurgy and Materials Science, Polish Academy of Sciences, 25 Reymonta Str., 30-059, Kraków, Poland

• https://orcid.org/0000-0001-6680-9636

Bibliografia

• [1] K. Ullakko, J.K. Huang, C. Kantner, R.C. O’Handley, V.V. Kokorin, Appl. Phys. Lett. 69 (1996). DOI: https://doi.org/10.1063/1.117637
• [2] E. Pagounis, R. Chulist, M.J. Szczerba, M. Laufenberg, Appl. Phys. Lett. 105, 052405 (2014). DOI: https://doi.org/10.1063/1.4892633
• [3] E. Pagounis, M.J. Szczerba, R. Chulist, M. Laufenberg, Appl. Phys. Lett. 107, 152407 (2009). DOI: https://doi.org/10.1063/1.4933303
• [4] A. Sozinov, N. Lanska, A. Soroka, W. Zou, Appl. Phys. Lett. 102, 021902 (2013). DOI: https://doi.org/10.1063/1.4775677
• [5] F. Chen, B. Tian, L. Li, Y. Zheng, Phys. Scr. T129 227 (2007). DOI: https://doi.org/10.1088/0031-8949/2007/T129/051
• [6] D.M. Liu, Z.H. Nie, Y.D. Wang, Y.D. Liu, G. Wang, Y. Ren, L. Zuo, Metall. Mater. Trans. A 39, 466 (2008). DOI: https://doi.org/10.1007/s11661-007-9435-8
• [7] B. Tian, F. Chen, Y. Liu, Y.F. Zheng, Mater. Lett. 62, 2851 (2008). DOI: https://doi.org/10.1016/j.matlet.2008.01.071
• [8] I. Suorsa, J. Tellinen, K. Ullakko, E. Pagounis, Appl. Phys. 95, 8054 (2004). DOI: https://doi.org/10.1063/1.1711181
• [9] N. Sarawate, M. Dapino, Phys. Lett. 88, 121923 (2006). DOI: https://doi.org/10.1063/1.2189452
• [10] I. Karaman, B. Basaran, H.E. Karaca, A.I. Karsilayan, Y.I. Chumlyakov, Appl. Phys. Lett. 90, 172505 (2007). DOI: https://doi.org/10.1063/1.2721143
• [11] H.E. Karaca, I. Karaman, B. Basaran, Y. Ren, Y.I. Chumlyakov, H.J. Maier, Adv. Funct. Mater. 19, 983 (2009). DOI: https://doi.org/10.1002/adfm.200801322
• [12] S. Barker, E. Rhoads, P. Lindquist, M. Vreugdenhil, P. Müllner, J. Med. Device 10, 041009 (2016). DOI: https://doi.org/10.1115/1.4034576
• [13] N.M. Bruno, C. Ciocanel, H.P. Feigenbaum, A. Waldauer, Smart Mater. Struct. 21, 094018 (2012). DOI: https://doi.org/10.1088/0964-1726/21/9/094018
• [14] D.C. Dunand, P. Müllner, Adv. Mater 23, 216 (2011). DOI: https://doi.org/10.1002/adma.201002753
• [15] U. Gaitzsch, S. Roth, B. Rellinghaus, L. Schultz, J. Magn. Mater. 305, 275 (2006). DOI: https://doi.org/10.1016/j.jmmm.2006.01.017
• [16] U. Gaitzsch, J. Romberg, M. Pötschke, S. Roth, P. Müllner, Scr. Mater. 65, 679 (2011). DOI: https://doi.org/10.1016/j.scriptamat.2011.07.011
• [17] M. Pötschke, U. Gaitzsch, S. Roth, B. Rellinghaus, L. Schultz, J. Magn. Magn. Mater. 316, 383 (2007). DOI: https://doi.org/10.1016/j.jmmm.2007.03.032
• [18] K. Ullakko, Y. Ezer, A. Sozinov, G. Kimmel, P. Yakovenko, V. Lindroos, Scr. Mater. 44, 475 (2001). DOI: https://doi.org/10.1016/S1359-6462(00)00610-2
• [19] U. Gaitzsch, M. Pötschke, S. Roth, B. Rellinghaus, L. Schultz, Acta Mater. 57, 365 (2009). DOI: https://doi.org/10.1016/j.actamat.2008.09.017
• [20] C. Hürrich, S. Roth, H. Wendrock, M. Pötschke, D. Cong, B. Rellinghaus, L. Schultz, J. Phys. Conf. Ser. 303, 012080 (2011). DOI: https://doi.org/10.1088/1742-6596/303/1/012080
• [21] N. Scheerbaum, O. Heczko, J. Liu, D. Hinz, L. Schultz, O. Gutfleisch, New J. Phys. 10, 073002 (2008). DOI: https://doi.org/10.1088/1367-2630/10/7/073002
• [22] V. Zhukova, V. Rodionova, L. Fetisov, A. Grunin, A. Goikhman, A. Torcunov, A. Aronin, G. Abrosimova, A. Kiselev, N. Perov, A. Granovsky, T. Ryba, S. Michalik, IEEE Trans. Magn. 50, 4 (2014).
• [23] M. Chmielus, X.X. Zhang, C. Witherspoon, D.C. Dunand, P. Müllner, Nature Materials 8, 863 (2009). DOI: https://doi.org/10.1038/nmat2527
• [24] S.Y. Yu, A.J. Gu, S.S. Kang, S.J. Hu, Z.C. Li, S.T. Ye, H.H. Li, J.J. Sun, R.R. Hao, J. Alloys Compd. 681, 1 (2016). DOI: http://doi.org/10.1016/j.jallcom.2016.04.249
• [25] D.M. Liu, Z.H. Nie, Y.D. Wang, Y.D. Liu, G. Wang, Y. Ren, L. Zuo, Metall. Mater. Trans. A 39, 466 (2008). DOI: https://doi.org/10.1007/s11661-007-9435-8
• [26] B. Tian, F. Chen, Y. Liu, Y.F. Zheng, Mater. Lett. 62, 2851 (2008). DOI: https://doi.org/10.1016/j.matlet.2008.01.071
• [27] T.D. Hatchard, J.S. Thorne, S.P. Farrell, R.A. Dunlap, J. Phys.: Condensed. Matter. 20, 445205 (2008). DOI: https://doi.org/10.1088/0953-8984/20/44/445205
• [28] V.A. Chernenko, E. Cesari, J. Pons, C. Segui, J. Mater. Research 15, 1496 (2000). DOI: https://doi.otg/10.1557/JMR.2000.0215
• [29] O. Heczko, P. Svec, D. Janickovic, K. Ullakko, IEEE Transactions on Magnetics 38, 2841 (2002). DOI: https://doi:10.1109/TMAG.2002.802471
• [30] N.V. Rama Rao, R. Gopalan, V. Chandrasekaran, K.G. Suresh, J. Alloys Compd. 478, 59 (2009). DOI: https://doi.org/10.1016/j.jallcom.2008.12.015
• [31] J. Gutiérrez, J.M. Barandiarán, P. Lázpita, C. Seguí, E. Cesari Sens, Actuators A: Phys. 129, 163 (2006). DOI: https://doi.org/10.1016/j.sna.2005.11.035
• [32] R. Chulist, P. Czaja, Scripta Mater. 189, 106 (2020). DOI: https://doi.org/10.1016/j.scriptamat.2020.08.007
• [33] R. Chulist, K. Nalepka, A. Sozinov, Int. J. Plast. 126, 102628 (2020).
• [34] A. Wójcik, R. Chulist, P. Czaja, M. Kowalczyk, P. Zackiewicz, N. Schell, W. Maziarz, Acta Mater. 219, 117237 (2021). DOI: https://doi.org/10.1016/j.actamat.2021.117237
• [35] R. Chulist, M. Faryna, M.J. Szczerba, Acta Mater. 103, 836-843 (2016). DOI: https://doi.org/10.1016/j.actamat.2015.11.007
• [36] R. Chulist, M. Faryna, M.J. Szczerba, Journal of Materials Science 51, 10943-10948 (2016). DOI: https://doi.org/10.1007/s10853-016-0306-9
• [37] R. Chulist, P. Czaja, T. Tokarski, I. Kuksgauzen, Y.I. Chumlyakov, Int. J. Plast. 114, 63-71 (2019).

Uwagi

The work was carried out within the project 2018/29/B/ST8/02343 of the National Science Centre of Poland.