Energy assessment of the pneumatic sieve separator for agricultural crops

• Autorzy: Mykhailov Yevhen , Zadosna Natalia , Postnikova Marina , Pedchenko Ganna , Khmelovskyi Vasyl , Bondar Mariia , Ionichev Aleksey , Kozdęba Michał , Tomaszewska-Górecka Wioletta

Identyfikatory

DOI

10.2478/agriceng-2021-0012

Warianty tytułu

PL

Ocena energetyczna pracy przesiewacza pneumatycznego do płodów rolnych

• Języki publikacji: EN

Abstrakty

EN

As a result of energy assessment of a pneumatic sieve separator for agricultural crops it was determined that the specific energy consumption of the experimental pneumatic sieve separator was 0.18 kW⋅t-1. It is lower than in case of its domestic and foreign equivalents. For instance, the specific energy consumption of the separator of preliminary grain purification called SPO-50 (Ukraine) is 0.31 kW⋅t-1, and that of the machine of preliminary grain purification called MPO-50 (Russia) is 0.38 kW⋅t-1. Specific energy consumption of a pneumatic sieve separator is 1.72-2.11 times lower than in case of its domestic and foreign counterparts.

PL

W wyniku oceny energetycznej pneumatycznego separatora sitowego dla płodów rolnych ustalono, że jednostkowe zużycie energii eksperymentalnego pneumatycznego separatora sitowego wynosi 0,18 kW⋅t-1. Jest ono niższe niż w przypadku jego krajowych i zagranicznych odpowiedników. Na przykład, jednostkowe zużycie energii separatora do wstępnego oczyszczania ziarna o nazwie SPO-50 (Ukraina) wynosi 0,31 kW⋅t-1, a urządzenia do wstępnego oczyszczania ziarna o nazwie MPO-50 (Rosja) - 0,38 kW⋅t-1. Jednostkowe zużycie energii przez pneumatyczny separator sitowy jest 1.72-2.11 razy niższe niż jego krajowych i zagranicznych odpowiedników.

Słowa kluczowe

EN

pneumatic separator; seeds of agricultural crops; energy assessment

PL

separator pneumatyczny; nasiona upraw rolnych; ocena energetyczna

• Wydawca: Polskie Towarzystwo Inżynierii Rolniczej
• Czasopismo: Agricultural Engineering
• Rocznik: 2021
• Tom: Vol. 25, No. 1
• Strony: 147--155
• Opis fizyczny: Bibliogr. 36 poz., rys., tab.

Twórcy

autor

Mykhailov Yevhen

• Department of Machine Use in Agriculture, Dmytro Motornyi Tavria State Agrotechnological University in Melitopol

• https://orcid.org/0000-0001-9906-6699

autor

Zadosna Natalia

• Department of Machine Use in Agriculture, Dmytro Motornyi Tavria State Agrotechnological University in Melitopol

• https://orcid.org/0000-0001-7780-235X

autor

Postnikova Marina

• Department of Electrical Engineering and Electromechanics and Elements of Professor V.V. Ovcharov, Dmytro Motornyi Tavria State Agrotechnological University in Melitopol

• https://orcid.org/0000-0002-2025-6199

autor

Pedchenko Ganna

• Faculty of Economics and Business, Dmytro Motornyi Tavria State Agrotechnological University in Melitopol

• https://orcid.org/0000-0003-4182-9352

autor

Khmelovskyi Vasyl

• Department of Livestock Production Mechanization, National University of Life and Environmental Sciences of Ukraine

autor

Bondar Mariia

• Department of Mechanics, Faculty of Construction and Design, National University of Life and Environmental Sciences of Ukraine

autor

Ionichev Aleksey

• Factor Plus, Israel

autor

Kozdęba Michał

• Department of Production Engineering, Logistics and Applied Computer Science, University of Agriculture in Krakow, Balicka 116B, 30-149 Krakow, Poland

• https://orcid.org/0000-0002-3167-2606

autor

Tomaszewska-Górecka Wioletta

• Eastern European State College of Higher Education in Przemysl, Książąt Lubomirskich 6, 37-700 Przemysl, Poland

Bibliografia

• Aipov, R., Linenko, A., Badretdinov, I., Tuktarov, M., Akchurin, S. (2020). Research of the work of the sieve mill of a grain-cleaning machine with a linear asynchronous drive. Mathematical Biosciences and Engineering, 17(4), 4348-4363.
• Aliev, E., Bandura, V., Pryshliak, V., Yaropud, V., Trukhanska, O. (2018). Modeling of mechanical and technological processes of the agricultural industry. INMATEH Agricultural Engineering, 54(1), 95-104.
• Babić, L., Radojćin, M., Pavkov, I., Babić, M., Turan, J., Zoranović, M., Stanišić, S. (2013). Physical properties and compression loading behaviour of corn seed. International Agrophysics, 27(2), 119-126.
• Badretdinov, I., Mudarisov, S., Tuktarov, M., Dick, E., Arslanbekova, S. (2019). Mathematical modeling of the grain material separation in the pneumatic system of the grain-cleaning machine. Journal of Applied Engineering Science, 17(4), 529-534.
• Bilgin, B., Liang, J., Terzic, M.V., Dong, J., Rodriguez, R., Trickett, E., Emadi, A. (2019). Modeling and Analysis of Electric Motors: State-of-the-Art Review. IEEE Transactions on Transportation Electrification, 5(3), 602-617.
• Boac, J.M., Ambrose, R.P.K., Casada, M.E., Maghirang, R.G., Maier, D.E. (2014). Applications of Discrete Element Method in Modeling of Grain Postharvest Operations. Food Engineering Reviews, 6(4), 128-149.
• Bredykhin, V., Gurskyi, P., Alfyorov, O., Bredykhina, K., Pak, A. (2021). Improving the Mechanicalmathematical Model of Grain Mass Separation in A Fluidized Bed. Eastern-European Journal of Enterprise Technologies, 3, 79-86.
• Chernyakov, A.V., Koval, V.S., Yatsunov, A.N., Begunov, M.A., Shevchenko, A.P. (2021). Research of a conical pneumatic grain separator with a device for forced light fraction removal. IOP Conference Series: Earth and Environmental Science, 659(1), 0120412020.
• Choszcz, D.J., Reszczyński, P.S., Kolankowska, E., Konopka, S., Lipiński, A. (2020). The Effect of Selected Factors on Separation Efficiency in a Pneumatic Conical Separator. Sustainability, 12, 3051.
• Cieślik, S. (2021) Mathematical modeling of the dynamics of linear electrical systems with parallel calculations. Energies, 14(102), 2930.
• Hidy, G.M. (2003). Aerosols. In Encyclopedia of Physical Science and Technology (Third Edition). Academic Press, Amsterdam, ISBN 9780122274107.
• Ivanyshyn, V., Yermakov, S., Ishchenko, T., Mudryk, K., Hutsol, T. (2020). Calculation algorithm for the dynamic coefficient of vibro-viscosity and other properties of energy willow cuttings movement in terms of their unloading from the tanker. E3S Web of Conferences, 154, 04005 https://10.1051/e3sconf/202015404005.
• Jin, H., Hu, S., Xie, B., Yan, Y., Yang, M., Zhou, F. (2021). Experimental optimization for cleaning parameters and field application of cartridge filter in bulk grain loading. Powder Technology, 378, 421-429.
• Josephine, B., Ambrose, R., Mark, C., Ronaldo, M., Dirk, M. (2014). Applications of discrete element method in modeling of grain postharvest operations. Food Engineering Reviews, 6(4), 128-149.
• Kharchenko, S., Kovalyshyn, S., Zavgorodniy, A., Kharchenko, F., Mikhaylov, Ye., (2019) Effective sifting of flat seeds through sieve. Eastern-European Journal of Enterprise Technologies, 58(2), 17-26.
• Konopka, S., Choszcz, D., Markowski, P. (2017). Optimization of the Separation Parameters and Indicators of Separation Efficiency of Buckwheat Seeds. Sustainability, 9, 2134.
• Kovalenko, N., Kovalenko, V., Hutsol, T., Ievstafiieva, Y., Polishchuk, A. (2021). Economic Efficiency and Internal Competitive Advantages of Grain Production in the Central Region of Ukraine. Agricultural Engineering, 25(1), 51-62.
• Kroulík M., Hůla, J. Rybka, A. Honzík I. (2016). Pneumatic conveying characteristics of seeds in a vertical ascending airstream. Research in Agricultural Engineering, 62(2), 56-63.
• Krzysiak, Z., Samociuk, W., Zarajczyk, J., Beer-Lech K., Bartnik, G., Kaliniewicz, Z., Dziki, D. (2020). Effect of sieve unit inclination angle in a rotary cleaning device for barley grain. Transactions of the ASABEТ, 63(3), 609-618.
• Linenko, A., Tuktarov, M., Aipov, R., Baynazarov, V. (2017). Analysis of pulsed operating mode of linear induction drive of grain cleaning machine. Proceedings of the International Conference Actual Issues of Mechanical Engineering, 133, 420-424.
• Mudarisov, S., Khasanov, E., Rakhimov, Z., Gabitov, I., Badretdinov, I., Farchutdinov, I., Gallyamov, F., Davletshin, M., Aipov, R., Jarullin, R. (2017). Specifying Two-Phase Flow in Modeling Pneumatic Systems Performance of Farm Machines. Journal of Mechanical Engineering Research and Developments, 40(4), 706-715.
• Muratov, D., Kravchenko, E., Sukhoveeva, A., Andreeva, O. (2020). Innovative study on pneumatic separation of grain heap and economic feasibility of design versions. E3S Web of Conferences: 8th Innovative Technologies in Science and Education, ITSE 2020, 19 August 2020-30 August 2020, 210, 05010.
• Mykhailov, Ye., Golebiewski, J., Kiurchev, S., Hutsol, Т., Kolodii, O., Nurek, T., Glowacki, Sz., Zadosna, N., Verkholantseva, V., Palianychka, N., Kucher, О. (2020). Economic and technical efficiency of sunflower seed treatment. Warsaw University of Life Sciences Press, Warsaw. ISBN 978- 83-7583-934-0.
• Nesterenko, A., Leshchenko, S., Vasylkovskyi, O., Petrenko, D. (2019). Justification of Technological Parameters of the Grain Separator. Design, Production and Exploitation of Agricultural Machines, 49, 67-72.
• Panasiewicz, M., Zawislak, K., Kusinska, E., Sobczak, P. (2008). Purification and separation of loose material in pneumatic system with vertical air stream. TEKA Kom. Mot. Energ. Roln, 8, 171-176.
• Postnikova, M., Mikhailov, E., Nesterchuk, D., Rechina, O. (2019). Energy saving in the technological process of the grain grinding W.(eds.) Euro-Par Springer, Heidelberg, LNCS, 2, 395-403.
• Shaker, A. (2015). Theory of Agricultural Machine, Algadeer Co. for Printing and Publishing. Basrah, Iraq, p. 155.
• Shymko, L.S., Voinash, S.A., Andronov, A.V. (2020). Mathematical modeling of grain mictures in optimatization tasks of the dump bunker's kinematic parameters. IOP Conference Series: Earth and Environmental Sciencethis, 548(6), 062055.
• Tishchenko, L., Kharchenko, S. (2013). Application of methods of continuous environments mechanics for the description of grain mixes movement on vibro sieves, MOTROL. Commission of Motorization and Energetics in Agriculture, 15, 94-99.
• Tryhuba, A., Hutsol, T., Glowacki, S., Tryhuba, I., Tabor, S., Kwasniewski, D., Sorokin, D., Yermakov, S. (2021). Forecasting Quantitative Risk Indicators of Investors in Projects of Biohydrogen Production from Agricultural Raw Materials. Processes. 9(2):258. https://doi.org/10.3390/pr9020258.
• Ushakov, Y., Shakhov, V., Asmankin, E., Naumov, D. (2019). Theoretical study results of product flow management process in hammer-type shredder working chamber. Engineering for Rural Development, 18, 185-191.
• Vedmedeva, K., Soroka, A. (2015). Influence of some mutant genes on certain agronomically important traits in sunflower. Helia, 2, 21-22.
• Wang, GY., Wu, WF., Qiao, FX., Fu, DP., Liu, Z., Han, F. (2020). Research on an electric energysaving grain drying system with internal circulation of the drying medium. Journal of Food Process Engineering, 43(9), e13476.
• Yang, X., Shen, Y. (2015). Runge-Kutta Method for Solving Uncertain Differential Equations. Journal of Uncertainty Analysis and Applications, 3, 17.
• Yermakov, S., Hutsol, T., Rozkosz, A., Glowacki, S., Slobodian, S. (2021). Evaluation Of Effective Parameters Of Biomass Heat Treatment In Processing For Solid Fuel. Engineering For Rural Development. https://doi.org/10.22616/ERDev.2021.20.TF241.
• Zadosnaya, N. (2020). Justification of the parameters and operating modes of the louvered air distributor of the pneumatic sieve separator of sunflower oil raw materials. Ph.D. thesis, 260.

Uwagi

Opracowanie rekordu ze środków MEiN, umowa nr SONP/SP/546092/2022 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2022-2023).