Comparative Study on Mechanical Performances of Circular and Flat Geometry Welds in Friction Stir Welding of Aluminium Alloy

• Autorzy: Senthil S. M. , Ragu Nathan Seerangan , Parameshwaran Rathinasamy , Bhuvanesh Kumar M.

Identyfikatory

DOI

10.24425/amm.2021.136393

• Języki publikacji: EN

Abstrakty

EN

This study is to find the extent of variation in mechanical properties between plate and pipe welds fabricated out of the same FSW process parameters. Common thickness of 3 mm along with similar tool specifications is used to fabricate the weld. Process parameters of tool rotational speed 2000 rpm and weld speed 94 mm/min that was defined as optimal for pipe weld is used as common process parameters. Welds are analyzed for hardness and tensile properties. Yield strength and ultimate tensile strength varied about 8.1% and 11.2% respectively between plate and pipe welds. The hardness of the stir zones varied about 11.6% between plate and pipe welds.

Słowa kluczowe

EN

FSW; aluminium pipe; aluminium plate; tensile test; hardness test

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2021
• Tom: Vol. 66, iss. 3
• Strony: 881--886
• Opis fizyczny: Bibliogr. 17 poz., fot., rys., tab., wykr.

Twórcy

autor

Senthil S. M.

• Kongu Engineering College, Erode, India

• https://orcid.org/0000-0001-7166-9607

autor

Ragu Nathan Seerangan

• SREE Vidyanikethan Engineering College, Tirupati, India

• https://orcid.org/0000-0002-7371-3402

autor

Parameshwaran Rathinasamy

• Kongu Engineering College, Erode, India

• https://orcid.org/0000-0003-1108-6236

autor

Bhuvanesh Kumar M.

• Inational Institute of Technology, Tiruchirappalli, India

• https://orcid.org/0000-0001-5721-5000

Bibliografia

• [1] G. Mathers, The welding of aluminium and its alloys. Woodhead Publishing (2002).
• [2] T.H. Tra, ASEAN Engineering Journal 4, 73-81 (2011).
• [3] A. Ismail, M. Awang, M.A. Rojan, S.H. Samsudin, ARPN J. Eng. Appl. Sci. 11 (1), 277-280 (2006).
• [4] P. Manikkavasagan, G. Rajamurugan, K.S. Kumar, D. Yuvaraj, In: Mater. Sci. Forum. 302-305 (2015).
• [5] K.A. Prabha, P.K. Putha, B.S. Prasad, Mater. Today-Proc 5 (9), 18535-18543 (2018). https://doi.org/10.1016/j.matpr.2018.06.196
• [6] K. Elangovan, V. Balasubramanian, J. Mater. Process Tech. 200 (1), 163-175 (2008). https://doi.org/10.1016/j.jmatprotec.2007.09.019
• [7] D. Maneiah, K.P. Rao, K.B. Raju, Int. J. Adv. Res. Technol. 4 (12), 53-57 (2017). https://dx.doi.org/10.22161/ijaers.4.12.10
• [8] S. Ragu Nathan, V. Balasubramanian, S. Malarvizhi, A.G. Rao, Def. Technol. 11 (3), 308-317 (2015). doi:https://doi.org/10.1016/j.dt.2015.06.001
• [9] A. Ismail, M. Awang, H. Fawad, K. Ahmad, in: Proceedings of the 7th Asia Pacific IIW International Congress, Singapore, 78-81 (2013).
• [10] I. Sabry, A. Khourshid, H. Hindawy, A. Elkassas, Engineering and Technology in India, 2 (1), 1-14 (2017). DOI: 10.15740/HAS/ETI/8.1&2/1-14
• [11] M. Akbari, P. Asadi, Mater. Res. Express 6 (6), 066545 (2019). https://doi.org/10.1088/2053-1591/ab0d72
• [12] S.M. Senthil, R. Parameshwaran, S. Ragu Nathan, M. Bhuvanesh Kumar, K. Deepandurai, Struct. Multidiscip. O. 62 (4), 1117-1133 (2020). doi:10.1007/S00158-020-02542-2
• [13] S.M. Senthil, R. Parameshwaran, S.R. Nathan, S. Karthi, Russ. J. Nondestruct. 55 (12), 957-966 (2019). https://doi.org/10.1134/s1061830919120106
• [14] I. Mumvenge, S.A. Akinlabi, P.M. Mashinini, O.S. Fatoba, J. Okeniyi, E.T. Akinlabi, in: IOP Conf. Ser- Mat. Sci., 012035 (2018). doi:10.1088/1757-899x/413/1/012035
• [15] A. Ismail, M. Awang, F. Ab Rahman, B.A. Baharudin, P.Z.M. Khalid, D.A. Hamid, in: Engineering Applications for New Materials And Technologies, 439-444 (2018). https://doi.org/10.1007/978-3-319-72697-7_35
• [16] J.S. Sashank, P. Sampath, P.S. Krishna, R. Sagar, S. Venukumar, S. Muthukumaran, Mater. Today-Proc, 5 (2), 8348-8353 (2018). doi:https://doi.org/10.1016/j.matpr.2017.11.527
• [17] J. Tang, Y.J. Shen, Manuf. Process 29, 29-40 (2017). doi:https://doi.org/10.1016/j.jmapro.2017.07.005

Uwagi

Opracowanie rekordu ze środków MNiSW, umowa Nr 461252 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2021).