Comparative analysis of municipal solid waste systems: Cracow case study

• Autorzy: Stypka T. , Flaga-Maryańczyk A.

Identyfikatory

DOI

10.5277/epe130412

• Języki publikacji: EN

Abstrakty

EN

The evaluation method to compare municipal solid waste management (MSWM) systems has been presented. The results of the integrated waste management model (IWM-1), were used as the input data for the analysis. The results were integrated into life cycle analysis LCA impact categories. The authors present possible to calculate categories, and calculate them for the two MSWM scenarios. Next, the system performance was compared using a multicriteria method, called analytic hierarchy process (AHP). The hierarchical preference analysis on the World Wide Web software Web HIPRE) was applied to conduct the analysis. The criteria ratios for the AHP were assumed arbitrarily based on the best knowledge of the authors. Finally, the presented sensitivity analysis showed the confidence of the obtained results and pointed out the most important assumptions of the whole analysis. The two Cracow MSWM systems were used as a case study.

Słowa kluczowe

EN

municipal solid waste; waste management; computer modelling

PL

stałe odpady komunalne; gospodarka odpadami; modelowanie komputerowe

• Wydawca: Oficyna Wydawnicza Politechniki Wrocławskiej
• Czasopismo: Environment Protection Engineering
• Rocznik: 2013
• Tom: Vol. 39, nr 4
• Strony: 135--153
• Opis fizyczny: Bibliogr. 22 poz., tab., rys.

Twórcy

autor

Stypka T.

• Institute of Thermal Engineering and Air Protection, Cracow University of Technology, ul. Warszawska 24, 31-155 Cracow, Poland

autor

Flaga-Maryańczyk A.

Bibliografia

• [1] CLAPHAM W.B., Recyclace: A computerized planning tool to improve municipal solid waste management, Ohio J. Sci., 1986, 86 (4), 189.
• [2] JENKINS L., Parametric mixed integer programming: An application to solid waste management, Manage. Sci., 1982, 28 (11), 1270.
• [3] CHANG N.B., SHOEMAKER C.A., SCHULER R.E., Solid waste management the system Analysis with air pollution and leachate impact limitations, Waste Manage. Res., 1996, 14, 463.
• [4] WANG F.S., RICHARDSON A.J., RODDICK F.A., SWIM – a computer model for solid waste integrated management, Comput. Environ. Urban, 1988, 20 (4/5), 233.
• [5] BJORKLUND A., Environmental systems analysis waste management with emphasis on substance flow and environmental impact, Licentiate Thesis, Stockholm University of Technology, Stockholm 1998.
• [6] MACDONALD M.L., Solid waste management models: a state of the art review, J. Solid Waste Technol. Manage., 1996, 23 (2), 73.
• [7] MORRISSEY A.J., BROWNE J., Waste management models and their application to sustainable waste management, Waste Manage., 2004, 24, 297.
• [8] BARLAZ M.A., RANJITHAN R., WEITZ K.A., NISHTALA S.R., Life-Cycle Study of Municipal Solid Waste Management, System Description, US Environmental Protection Agency, USA, 1995.
• [9] WHITE P.R., FRANKE M., HINDLE P., Integrated Solid Waste Management. A Lifecycle Inventory, Blackie Academic & Professional, 1997.
• [10] SUNDBERG J., Municipal solid waste management with the MIMES/waste model. A complementary approach to LCA studies for evaluating waste management options, Workshop on LCA and Treatment of Solid Waste, Stockholm, 28–29 Sept. 1995, 252.
• [11] ERIKSSON O., FROSTELL B., BJORKLUND A., ASSEFA G., SUNDQVIST J.O., GRANATH J., CARLSSON M., BAKY A., THYSELIUS L., ORWARE-a simulation tool for waste management, Resour. Conserv. Recycl., 2002, 36, 287.
• [12] DEN BOER J., DEN BOER E., JAGER J., Wider application options of the LCA-IWM waste management the system Assessment tool. Assessment of the environmental impact of waste minimization, Efficient Management of Solid Waste, 7th Waste Forum 2007, Kalisz, 465 (in Polish).
• [13] MCDOUGALL F. WHITE P., FRANKE M., HINDLE P., Integrated Solid Waste Management. A Life Cycle Inventory, Blackwell Publishing, 2003.
• [14] KOPACZ K., Analysis of integrated municipal solid waste management at Cracow, Master thesis, Cracow University of Technology, Cracow 2003 (in Polish).
• [15] STYPKA T., Adopting the integrated waste management model (IWM-1) into the decision process. Integration and Optimization of Urban Sanitation Systems, Proc. of Polish-Swedish Seminar, 2005, Cracow.
• [16] STYPKA T., FLAGA-MARYAŃCZYK A., Developing the evaluation criteria for the municipal solid waste systems. Cracow case study, Chem. Chem. Technol., Lviv, Ukraine, 2010, Vol. 4.
• [17] STYPKA T., FLAGA A., Application of the integrated waste management model (IWM-1) into the decision process. Integration and optimization of urban sanitation systems, Proc. of Polish-Swedish- Ukrainian Seminar, Lviv 2006.
• [18] STYPKA T., FLAGA A., Implementation of computer modelling in the waste management process, Efficient management of solid waste, 7th Waste Forum, Kalisz, 2007, 435, (in Polish).
• [19] STYPKA T., FLAGA A., Integrating the results of the IWM-model using the LCA procedures. Cracow case study, 7th International Waste Forum, Poznań, 2009 (in Polish).
• [20] GUINÉE J.B., Handbook on Life Cycle Assessment. Operational Guide to the ISO Standards, Kluwer Academic Publishers, London 2002.
• [21] LINAKA P.W., JEFFREY V., RYANA J.V., WENDT J.O.L., Formation and destruction of hexavalent chromium in a laboratory swirl flame incinerator, Combust. Sci. Technol., 1996, 116–117 (1–6).
• [22] HIPRE software, <http://www.hipre.hut.fi>, Global Decision Support.