Mechanical properties of polymer concretes based on unsaturated polyester resin reinforced with milled car windscreen waste glass and quartz sand

• Autorzy: Nowacki Bartłomiej , Değirmenci Berk , Tekeli Berke Doğuş , Smoleń Jakub
• Języki publikacji: EN

Abstrakty

EN

This article presents an attempt to evaluate the mechanical properties such as the flexural strength and impact strength of polymer concretes based on unsaturated polyester resin reinforced with milled car windscreen waste glass and quartz sand. A set of five samples was prepared with a stable volume content of resin at 30% and varying proportions of milled glass from recycled car windscreens and quartz sand. The materials were tested in static and dynamic (Charpy) bending conditions. Based on the collected data, it was found that the most favorable properties were obtain by the polymer concrete with milled glass, and milled glass and sand (volume ratio 1:1). It is predicted that the developed materials can be successfully used in the production of paving slabs as well as prefabricated garden and road accessories. This would enable the disposal of troublesome waste, which is car windscreens, to produce high-quality products with a long service life.

Słowa kluczowe

EN

polymer concrete; car windscreen; glass powder; unsaturated polyester resin; mechanical properties

PL

polimerobeton; przednia szyba samochodu; mączka szklana; żywica poliestrowa nienasycona; właściwości mechaniczne

• Wydawca: Polskie Towarzystwo Materiałów Kompozytowych
• Czasopismo: Composites Theory and Practice
• Rocznik: 2021
• Tom: R. 21, nr 4
• Strony: 149--153
• Opis fizyczny: Bibliogr. 30 poz., rys., tab.

Twórcy

autor

Nowacki Bartłomiej

• Silesian University of Technology, Faculty of Materials Engineering, ul. Z. Krasińskiego 8 Street, 40-019 Katowice, Poland

autor

Değirmenci Berk

• Gebze Technical University, Engineering Faculty & Materials Science and Engineering, Kocaeli, Turke

autor

Tekeli Berke Doğuş

• Gebze Technical University, Engineering Faculty & Materials Science and Engineering, Kocaeli, Turke

autor

Smoleń Jakub

• Silesian University of Technology, Faculty of Materials Engineering, ul. Z. Krasińskiego 8 Street, 40-019 Katowice, Poland

Bibliografia

• [1] Jamroży Z., Beton i jego technologie, WN PWN, Warszawa 2008.
• [2] Kirlikovali E., Polymer/concrete composites – A review, Polymer Engineering and Science, 1981, 21, 8, 507-509, DOI: 10.1002/pen.760210811.
• [3] Kozioł M., Żuczek N., Olesik P., Wieczorek J. Preliminary analysis of concept of producing polymer concrete surface for outdoor terraces, Composites Theory and Practice 2020, 20, 3-4, 102-110.
• [4] Hop T., Betony polimerowe, Tom I, Wydawnictwo Politechniki Śląskiej, Gliwice 1992.
• [5] Hop T., Betony polimerowe, Tom II, Wydawnictwo Politechniki Śląskiej, Gliwice 1992
• [6] Figlus T., Kozioł M., Kuczyński Ł., The effect of selected operational factors on the vibroactivity of upper gearbox housings made of composite materials, Sensors 2019, 19, 4240, DOI: 10.3390/s19194240.
• [7] Polyakov V., Chatys R., Acoustic conductance of a thick-walled anisotropic spherical shell submerged in liquid. Aviation, 2014, 18, 1, 52-55, DOI: 10.3846/16487788.865937.
• [8] Toroń B., Szperlich P., Kozioł M., SbSI composites based on epoxy resin and cellulose for energy harvesting and sensors – The influence of SBSI nanowires conglomeration on piezoelectric properties, Materials 2020, 13, 4, art. 902, DOI: 10.3390/ma13040902.
• [9] Mistewicz K., Jesionek M., Nowak M., Kozioł M., SbSel pyroelectric nanogenerator for a low temperature waste heat recovery, Nano Energy 64(2019), nr 103906, DOI: 10.1016/j.nanoen.2019.103906.
• [10] Barbuta M., Harja M., Baran I., Comparison of mechanical properties for polymer concrete with different types of filler, Journal of Materials in Civil Engineering 2010, 22, 7, 696-701, DOI: 10.1061/(ASCE)MT.1943-5533.0000069.
• [11] Torkittiku P., Nochaiya T., Chaipanich A., The investigation of polyester resin polymer concrete with various amount of construction aggregate, AIP Conference Proceedings 2020, 2279, 100004, DOI: 10.1063/5.0023372.
• [12] Berndt M.L., Properties of sustainable concrete containing fly ash, slag and recycled concrete aggregate, Construction and Building Materials 2009, 23, 7, 26026-2613, DOI: 10.1016/j.conbuildmat.2009.02.011.
• [13] Asachi G., Barbuta M., Serbanoiu A.A., Babor D., Burlacu A., Wastes as aggregate substitution in polymer concreto, Procedia Manufacturing 2018, 22, 347-351, DOI: 10.1016/j.promfg.2018.03.052.
• [14] Chandra S., Ohama Y., Polymers in Concrete, CRC Press, Boca Raton, FL, USA 1994.
• [15] Walters D.G., Polymer Concrete, American Concrete Institute, Farmington Hills, MI, USA 1993.
• [16] Vipulanandan C., Paul E., Characterization of polyester polymer and polymer concrete, Journal of Materials in Civil Engineering 1993, 5, 1, 62, DOI: 10.1061/(ASCE)0899-1561(1993)5:1(62).
• [17] Varughese K.T., Chaturvedi B.K., Fly ash as fine aggregate in polyester based polymer concrete, Cement Concrete Composites 1995, 18, 2, 105-108, DOI: 10.1016/0958-9465(95)00006-2.
• [18] Soos L., Matus M., Pokusova M., Cacko V., Babics J., The recycling of waste laminated glass through decomposition technologies, Recycling 2021, 6, 2, article 26, DOI: 10.3390/recycling6020026.
• [19] Tuchinda C., Srivannaboon S., Lim H.W., Photoprotection by window glass, automobile glass, and sunglasses, Journal of the American Academy of Dermatology 2006, 54, 5, 845-854, DOI: 10.1016/j.jaad.2005.11.1082.
• [20] Hodul J., Hodna J., Dorchytka R., Vyhnankova M., Utilization of waste glass in polymer concrete, Materials Science Forum 2016, 856, 171-177, DOI: 10.4028/www.scientific.net/MSF.865.171.
• [21] Penczek P., Królikowski W., Kłosowska-Wołkowicz Z., Nienasycone żywice poliestrowe, WNT, Warszawa 2016.
• [22] Vipulanandan C., Paul E., Performance of epoxy and polyester polymer concrete, Materials Journal 1990, 87, 3, 241-251, DOI: 10.14359/2187.
• [23] Ribeiro M., Tavares C., Ferreira A., Chemical resistance of epoxy and polyester polymer concrete to acids and salts, Journal of Polymer Engineering 2002, 22, 1, 27-44, DOI: 10.1515/POLYENG.2002.22.1.27.
• [24] Oliwa R., Bulanda K., Oleksy M., Ostyńska P., Budzik G., Płocińska M., Krauze S., Fire resistance and mechanical properties of powder-epoxy composites reinforced with recycled glass fiber laminate, Polimery 2020, 65, 4, 280-288, DOI: 10.14314/polimery.2020.4.4.
• [25] Orak S., Investigation of vibration damping on polymer concrete with polyester resin, Cement and Concrete Research 2000, 30, 2, 171-174, DOI: 10.1016/S0008-8846(99)00225-2.
• [26] Kumar R., A review on epoxy and polyester based polimer concrete and exploration of polyfurfuryl alcohol as polimer concrete, Journal of Polymers 2016, 7249743, DOI: 10.1155/2016/7249743.
• [27] Stevens R.J., Guthrie W.S., Baxter J.S., Mazzeo B.A., Field evaluation of polyester-polymer concrete overlays on bridge decks using nondestructive testing, Journal of Materials in Civil Engineering 2021, 33, 7, DOI: 10.1061/(ASCE)MT.1943-5533.0003810.
• [28] Nodehi M., Epoxy, polyester and vinyl ester based polymer concrete: A review, Innovative Infrastructure Solutions 2022, 7, 1, 64, DOI: 10.1007/s41062-021-00661-3.
• [29] Kijania M., Rewera B., Kłos M., Właściwości betonów zwykłych oraz wysokiej wytrzymałości – porównanie wyników doświadczalnych z wytycznymi normowymi, Proceedings of “Dni Betonu 2021”, Wisła, Poland, 2021 October, 11-13 (https://www.dnibetonu.com/wp-content/pdfs/2016/kijania_rewera_klos.pdf).
• [30] Terescenko J., Bitins А., Shestakov V., Chatys R., Maklakov J., Algorithm for analyzing deviations and irregularities in the functioning of the airline’s structural units and personnel in the face of uncertainty, Aviation 2020, 24, 2, 51-56, DOI: 10.3846/aviation.2020.12375.

Uwagi

Opracowanie rekordu ze środków MEiN, umowa nr SONP/SP/546092/2022 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2022-2023).