PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

A numerical analysis of different methods for strengthening beams made of glulam with CFRP fiber composites

Autorzy
Treść / Zawartość
Identyfikatory
Warianty tytułu
PL
Analiza numeryczna różnych sposobów wzmacniania belek z drewna klejonego warstwowo kompozytami włóknistymi CFRP
Języki publikacji
EN
Abstrakty
EN
Due to the favorable properties, composite materials are increasingly used in construction. Especially, they are often used to reinforce structural elements made of traditional building materials. The article presents numerical calculations of glued laminated timber beams reinforced with CFRP fiber composites in the form of tapes and bars, used in a different geometrical arrangement. The analysis was performed in the linearelastic range in the ANSYS program. Based on numerical calculations, it was determined that the most effective method is strengthening using a horizontal tape pasted between the last and the second last sipe.
PL
Ze względu na korzystne właściwości coraz szerzej wykorzystywanym materiałem w budownictwie są materiały kompozytowe. Szczególnie często używa się ich przy wzmacniani elementów konstrukcyjnych wykonanych z tradycyjnych materiałów budowlanych. W artykule przedstawiono obliczenia numeryczne belek z drewna klejonego warstwowo wzmocnionych kompozytami włóknistymi CFRP w postaci taśm i prętów, zastosowanych w różnym układzie geometrycznym. Analizę wykonano w zakresie liniowo-sprężystym w programie ANSYS. Na podstawie obliczeń numerycznych określono, że najbardziej efektywne jest wzmocnienie z wykorzystaniem poziomej taśmy wklejonej pomiędzy ostatnią a przedostatnią lamelę.
Rocznik
Strony
72--77
Opis fizyczny
Bibliogr. 19 poz., rys., tab.
Twórcy
  • Czestochowa University of Technology, Faculty of Civil Engineering, ul. Akademicka 3, 42-218 Częstochowa
Bibliografia
  • [1] Li J., Xie J., Liu F., Lu Z., A critical review and assessment for FRP-concrete bond systems with epoxy resin exposed to chloride environments, Composite Structures 2019, doi: https://doi.org/10.1016/j.compstruct.20 19.111372.
  • [2] Kamruzzaman M., Jumaat M.Z., Ramli Sulong N.H., Saiful Islam A.B.M., A review on strengthening steel beams using FRP under fatigue, Hindawi Publishing Corporation, The Scientific World Journal 2014, 1-21.
  • [3] Vahedian A., Shrestha R., Crews K., Bond strength model for externally bonded FRP-to-timber interface, Composite Structures 2018, 200, 328-339.
  • [4] Pravin Kumar Venkat Rao Padalu, Yogendra Singh, Sreekanta Das, Out-of-plane flexural behaviour of masonry wallettes strengthened using FRP composites and externally bonded grids: Comparative study, Composites Part B 2019, 176, 107302.
  • [5] Schober K.-U., Harte A.M., Kliger R., Jockwer R., Xu Q., Chen J.-F., FRP reinforcement of timber structures, Construction and Building Materials 2015, 97, 106-118.
  • [6] Corradi M., Borri A., Righetti L., Speranzini E., Uncertainty analysis of FRP reinforced timber beams, Composites Part B 2017, 113, 174-184.
  • [7] Raftery G.M., Rodd P.D., FRP reinforcement of low-grade glulam timber bonded with Wood adhesive, Construction and Building Materials 2015, 91, 116-125.
  • [8] Yang H., Ju D., Liu W., Lu W., Prestressed glulam beams reinforced with CFRP bars, Construction and Building Materials 2016, 109, 73-83.
  • [9] Grunwalda C., Kaufmanna M., Altera B., Valléea T., Tannert T., Numerical investigations and capacity prediction of G-FRP rods glued into bimber, Composite Structures 2018, 202, 47-59.
  • [10] Lacki P., Nawrot J., Derlatka A., Analiza numeryczna segmentu stalowo-betonowego dźwigara mostowego obciążonego ciężarem własnym, Zeszyty Naukowe Politechniki Częstochowskiej 2016, seria Budownictwo 22(1), 204-212.
  • [11] Vahedian A., Shrestha R., Crews K., Experimental and analytical investigation on CFRP strengthened glulam laminated timber beams: Full-scale experiments, Composites Part B 2019, 164, 377-389.
  • [12] Thorhallsson E.R., Hinriksson G.I., Snæbj€ornsson J.T., Strength and stiffness of glulam beams reinforced with glass and basalt fibres, Composites Part B 2017, 115, 300-307.
  • [13] Yang H., Liu W., Lu W., Zhu S., Geng O., Flexural behavior of FRP and steel reinforced glulam beams: Experimental and theoretical evaluation, Construction and Building Materials 2016, 106, 550-563.
  • [14] Lu W., Ling Z., Geng Q., Liu W., Yang H., Yue K., Study on flexural behaviour of glulam beams reinforced by Near Surface Mounted (NSM) CFRP laminates, Construction and Building Materials 2015, 91, 23-31.
  • [15] Fossetti M., Minafň G., Papia M., Flexural behaviour of glulam timber beams reinforced with FRP cords, Construction and Building Materials 2015, 95, 54-64.
  • [16] Szymczak P., Olbryk P., Chołostiakow S., Kamińska M., Badanie prętów kompozytowych, Wyniki badania prętów kompozytowych GFRP i BFRP. Sprawozdanie z badań.
  • [17] PN-EN 14080:2013 Konstrukcje drewniane - Drewno klejone warstwowo i drewno lite klejone warstwowo - Wymagania.
  • [18] Wood Handbook Wood as an Engineering Material, Forest Products Laboratory, United States Department of Agriculture Forest Service, Madison, Wisconsin, April 2010.
  • [19] Nowak T.P., Jasieńko J., Czepiżak D., Experimental tests and numerical analysis of historic bent timber elements reinforced with CFRP strips, Construction and Building Materials 2013, 40, 197-206.
Uwagi
Opracowanie rekordu ze środków MNiSW, umowa Nr 461252 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2020).
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-bf1651c6-f13c-4a06-a752-b810012a4def
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.