Pineapple leaf fibers as a reinforcement of biocomposites - an overview

• Autorzy: Mohamed Rahmah , Hapizi Norsuriati , Norizan Mohd Nurrazi , Khairunnisa Nur

Identyfikatory

DOI

10.14314/polimery.2021.11.1

Warianty tytułu

PL

Włókna z liści ananasa jako wzmocnienie biokompozytów – przegląd literatury

• Języki publikacji: EN

Abstrakty

EN

Based on 87 references, a literature review was presented on PLA reinforced with pineapple leaf fibers (PALF). The properties of PALF were compared with those of other natural fibers. Mechanical properties of PLA composites and factors influencing them, such as filler content, adhesion at the interface between polymer fiber and matrix, as well as fiber length and their modification were discussed. Potential applications of PLA/PALF composites were also presented.

PL

Na podstawie 87 pozycji literaturowych przedstawiono przegląd literatury dotyczący PLA wzmocnionego włóknami pozyskanymi z liści ananasa (PALF). Właściwości PALF porównano z właściwościami innych włókien naturalnych. Omówiono właściwości mechaniczne kompozytów PLA oraz czynniki na nie wpływające, takie jak zawartość napełniacza, adhezja na granicy faz włókno-osnowa polimerowa oraz długość włókna i jego modyfikacja. Przedstawiono również potencjalne zastosowania kompozytów PLA/PALF.

Słowa kluczowe

EN

PLA; composites; pineapple leaf fibers; PALF; mechanical properties

PL

PLA; kompozyty; włókna pozyskane z liści ananasa; PALF; właściwości mechaniczne

• Wydawca: Sieć Badawcza Łukasiewicz – Instytut Chemii Przemysłowej
• Czasopismo: Polimery
• Rocznik: 2021
• Tom: T. 66, nr 11-12
• Strony: 559--573
• Opis fizyczny: Bibliogr. 87 poz., rys. kolor., wykr.

Twórcy

autor

Mohamed Rahmah

• Universiti Teknologi MARA (UiTM), Faculty of Applied Science, Green Polymer Research Group, 40450 Shah Alam, Selangor, Malaysia

• https://orcid.org/0000-0001-9538-2555

autor

Hapizi Norsuriati

• Universiti Teknologi MARA (UiTM), Faculty of Applied Science, Green Polymer Research Group, 40450 Shah Alam, Selangor, Malaysia

• https://orcid.org/0000-0002-9252-3057

autor

Norizan Mohd Nurrazi

• Universiti Pertahanan Nasional Malaysia (UPNM), Centre for Defence Foundation Studies, Kem Perdana Sungai Besi, Kuala Lumpur 57000, Malaysia

• https://orcid.org/0000-0001-7697-0511

autor

Khairunnisa Nur

• Universiti Teknologi MARA (UiTM), Faculty of Applied Science, Green Polymer Research Group, 40450 Shah Alam, Selangor, Malaysia

• https://orcid.org/0000-0002-5893-8654

Bibliografia

• Munawar R.F., Jamil N.H., Shahril M.K. et al.: Applied Mechanics and Materials 2015, 761,520.
• Macedo J. R. N., Rosa D.S.: Key Engineering Materials 2016, 668, 54.
• Siakeng R., Jawaid M., Ariffin H. et al.: Polymer Composites 2019, 40, 446.
• Oksman K., Skrifvars M., Selin J.F.: Composites Science Technology 2003, 63, 1317.
• Getme A.S., Patel B.: Materials Today Proceedings 2019, 26, 2116.
• Todkar S.S., Patil S. A.: Composites Part B Engineering 2019, 174, 106927.
• Farah S., Anderson D.G., Langer R.: Advance Drug Delivery Reviews 2016, 107, 367.
• Shogren R.L., Doane W.M., Garlotta D. et al.: Polymer Degradation and Stability 2003, 79, 405.
• Stopper A., Okuda J., Kol M.: Macromolecules 2012, 45, 698.
• Pholharn D., Srithep Y., and Morris J.: IOP Conference Series: Materials Science and Engineering 2017, 213, 1.
• Hassan A., Balakrishnan H., Akbari A.: Advanced Structure Materials 2013, 18, 361.
• Saidi M.A., Gorin A., Heng S.K. et al.: Materials Today Proceedngs 2017, 4, 3150.
• Rasal R.M., Janorkar A.V., Hirt D.E.: Progress Polymer Science 2010, 35, 338.
• Saba N., Jawaid M., Sultan M.T.H.: Lignocellulosic Fibre and Biomass-Based Composite Materials: Processing, Properties and Applications 2017, 1, 95.
• Auras R., Harte B., Selke S.: Macromolecule Bioscience 2004, 4, 835.
• Janorkar A.V., Metters A.T., Hirt D.E.: Macromolecule 2004, 37, 9151.
• Tokiwa Y., Calabia B.P.: Applied Microbiology Biotechnology 2006, 72, 244.
• Putri D.N., Perdani M.S., Arbianti R. et al.: Energy Reports 2020, 6, 221.
• Burg K.J.L., Holder W.D., Culberson C.R. et al.: Journal of Biomaterials Science Polymer Edition 1999, 10, 147.
• Koh J.J., Zhang X., He C.: International Journal of Biological Macromolecules 2018, 109, 99.
• Sangeetha V.H., Deka H., Varghese T.O. et al.: Polymer Composites 2018, 39, 81.
• Ilyas R.A., Sapuan S.M., Kadier A. et al.: Advance Processing, Properties, and Applications of Starch and Other Bio-Based Polymers 2020, 111.
• Zaaba N.F., Jaafar M.: Polymer Engineering and Science 2020, 60, 2061.
• Doshi Y., Dhruve H.: Journal of the Textile Association 2021 ,20, 218.
• Kumar R., Obrai S., Sharma A.: Pelagia Research Library 2011, 2, 219. www.pelagiaresearchlibrary.com
• Begum K., Islam M.A.: Research Journal of Engineering Sciences 2013, 2(3), 46. www.isca.in.
• Yashas G. T. G., Sanjay M.R., Parameswaranpillai J. et al.: Frontiers in Materials 2019, 6, 226.
• Kaewpirom S., Worrarat C., Fibers and Polymers 2014, 15, 1469.
• Huda M.S., Drzal L.T., Mohanty A.K. et al.: Composite Interfaces 2008, 15, 169.
• Devi L.U., Bhagawan S.S., and Thomas S.: Journal of Applied Polymer Science 1997, 64, 1739.
• Khalil H.P.S.A., Jawaid M., Hassan A. et al.: Composites and Their Applications 2012, 8, 187.
• Liu W., Drzal L.T., Mohanty A.K. et al.:, Composites Part B Engineering 2007, 38, 352.
• Asim M., Abdan K., Jawaid M. et al.: International Journal of Polymer Science 2015, 2015, 1.
• Yahya S.A.B., Yusof Y., Advanced Materials Research 2013, 701, 430.
• Bhaduri S.K., Sen S.K.: Carbohydrate Research 1983, 121, 211.
• Saha S.C., Ray P.K., Pandey S.N. et al.: Journal of Applied Polymer Science 1991, 42, 2767.
• Mohanty A.K., Misra M., Hinrichsen G.: Macromolecular Materials and Engineering 2000, 276/277, 1.
• Reddy N., Yang Y.: Trends in Biotechnology 2005, 23, 22.
• Abdul Khalil H.P.S., Siti Alwani M., Mohd Omar A.K.: BioResources 2006, 1, 220.
• Idicula M., Boudenne A., Umadevi L. et al.: Composites Science and Technology 2006, 66, 2719.
• Satyanarayana K., Guimaraes J., Wypych F.: Composites Part A: Applied Science and Manufacturing 2007, 38, 1694.
• Siregar J. P., Sapuan S. M., Rahman M. Z. A. et al.: Advance Composites Letter 2008, 18, 25.
• Chattopadhyay S.K., Singh S., Paramanik N. et al.: Journal of Applied Science Polymer 2011, 121, 2226.
• Zhou Y., Fan M., Chen L.: Composites Part B: Engineering 2016, 101, 31.
• Ramli S.N.R., Fadzullah S.H.S.M., Mustafa Z.: Jurnal Teknologi 2016, 2, 111.
• George J., Joseph K., Bhagawan S.S. et al.: Materials Letters 1993, 18,163.
• Luo S., Netravali N.: Polymer Composites 1999, 20, 367.
• Arib R.M.N., Sapuan S.M., Ahmad M.M.H.M. et al.: Materials and Design 2006, 27, 391.
• Mohamed A.R., Sapuan S.M., Shahjahan M. et al.: International Journal of food, agriculture and environment 2009, 7, 235.
• Ho M.P., Wang H., Lee J.H. et al.: Composites: Part B Engineering 2012, 43, 3549. Google Scholar
• Saba N., Paridah M. T., Jawaid M.: Construction and Building Materials 2015, 76, 87.
• Moshiul Alam A.K.M., Beg M., Reddy Prasad D.M. et al.: Composites Part A: Applied Science and Manufacturing 2012, 43, 1921.
• Joseph S., Joseph K., Thomas S.: International Journal Polymeric Materials and Polymeric Biomaterials 2006, 55, 925.
• Huda M.S., Drzal L.T., Misra M. et al.: Journal of Applied Polymer Science 2016, 102, 4856.
• Rashid B., Leman Z., Jawaid M. et al.: Bioresources 2017, 12(1), 1447.
• Ochi S.: Mechanics of Materials 2008, 40, 446.
• Manalo A.C., Wani E., Zulkarnain N.A. et al.: Composites Part B: Engineering 2015, 80, 73, 10.1016/j.compositesb.2015.05.033
• Nagu K.S., Yoganandam K., Mohanavel V. et al.: Materials Today : Proceedings 2020, 33, 3061.
• Islam M.S., Pickering K.L., Foreman N.J.: Composites Part A :Applied Science and Manufacturing 2010,41, 596.
• Mylsamy K., Rajendran I.: Materials and Design 2011, 32, 3076. 10.1016/j.matdes.2010.12.051
• Srisuwan S., Prasoetsopha N., Suppakarn N. et al.: Energy Procedia 2014, 56, 19. https:// doi.org/10.1016/j.egypro.2014.07.127
• Aji I.S., Zainudin E.S., Khalina A. et al.: Key Engineering Materials 2011, 471, 680.
• Mohamed M.M.F., Mohamed R.: Advance Materials Research 2015, 1113, 1222.
• Tiesong L., Peigang H., Defu L.: Bulletin of Materials Science 2009, 32, 77.
• Rezaei F., Yunus R., Ibrahim N.A.: Materials and Design 2009, 30, 260.
• Capela C., Oliveira S.E., Pestana J. et al.: Procedia Structural Integrity 2017, 5, 539.
• Shibata M., Ozawa K., Teramoto N. et al.: Macromolecular Materials and Engineering 2003, 288, 35.
• Felix J.M., Gatenholm P.: Journal of Materials Science 1994, 29, 3043.
• Siregar J. P., Sapuan S.M., Rahman M.Z.A. et al.: Advance Composites Letters 2009, 18, 25.
• Tawakkal I.S.M.A., Talib R.A., Abdan K., Ling Ch.N.: BioResources 2012, 2(7), 1643.
• Md Fadzullah S.H.S., Mustafa Z., Ramli S.N.R. et al.: Key Engineering Materials 2016, 694, 18.
• Beg H., Akindoyo J.O., Ghazali S. et al.: International Journal of Chemical, Nuclear, Materials and Metallurgical Engineering 2015, 9,1.
• Raghu N., Kale A., Raj A. et al.: Journal of Applied Polymer Science 2018, 135, 1.
• Smitthipong W., Tantatherdtam R., Chollakup R.: Journal of Thermoplastic Composite Materials 2015, 28, 717.
• Akrami M., Ghasemi I., Azizi H. et al.: Carbohydrate Polymers 2016, 144, 254.
• Wollerdorfer M., Bader H.: Industrial Crops and Products 1998, 8, 105.
• Dufresne A., Dupeyre D., Vignon M.R.: Starch-Cellulose Micrifibril Composites 1999, 76(14), 2080.
• Hapizi N., Mohamed R.: IOP Conference Series Materials Science and Engineering 2021, 1091, 012077.
• Abd Aziz N.Z., Mohamed R.: Advance Materials Research 2013, 748, 201.
• Zuhaira A.A.N., Rahmah M..: Advance Materials Research,2013, 795, 286.
• Rahmah M., Zuhaira N., Aziz A. et al.: International Journal of Industrial and Manufacturing Engineering, 2015, 9, 364.
• Muizz M., Mohamed F., Mohamed R. et al.: Proceedings of Postgraduate Conference on Global Green Issues (Go Green) 2007, 748, 201.
• Selamat M.Z., Syazwan M., Tahir Z. et al.: MATEC Web of Conferences 2018, 04008, 1.
• Luo S., Netravali A.N. et al.: Polymer Composites 1999, 20, 367.
• Basu P.R.K.A., Chellamani K.P.: Asian Textile Journal 2003, 12, 94.
• Geethamma V.G., Mathew K.T., Lakshminarayanan R. et al.: Polymer 1998, 39, 1483.
• Yusof Y., Ahmad M. R., Wahab S. et al.: Advance Materials Research 2012, 383-390, 3382.

Uwagi

Opracowanie rekordu ze środków MNiSW, umowa Nr 461252 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2021)