PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Powiadomienia systemowe
  • Sesja wygasła!
Tytuł artykułu

Preliminary study of hot mix asphalt containing water treatment and sewage sludge

Treść / Zawartość
Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
Throughout the world, considerable quantities of water treatment sludge (WTS) and sewage sludge (SS) are produced as waste. This study assessed in the laboratory, the possibility to use both waste products when they are incorporated as filler at 1% with relation to the total mass of a hot mix asphalt - HMA. To this end, both waste products were initially reduced to ash through a calcination process. Resistance tests under monotonic load (Marshall and indirect tension tests), and cyclic load (resilient modulus test) were applied on mixes that contained WTS and SS. Besides, moisture damage (modified Lotmman test), and abrasion (Cantabro) resistance were assessed. An analysis of variance (ANOVA) test was performed in order to verify if the results are statically equal or not to those of the control HMA. As a general conclusion, it is reported that both materials show a resistance increase under monotonic load and higher stiffness under cyclic load (cohesion) when they are incorporated into the mix as filler despite the fact that the asphalt content used was less than the control mix. However, some problems are observed associated with moisture damage resistance, and friction wear (adherence).
Rocznik
Strony
225--240
Opis fizyczny
Bibliogr. 35 poz., il., tab.
Twórcy
  • Universidad Piloto de Colombia, Faculty of Engineering, Bogotá, Colombia
  • Universidade de Brasilia, Faculty of Techonology, Campus Universitário Darcy Ribeiro, Brasilia, Brasil
autor
  • Universidade Federal de Campina Grande, Departamento de Engenharia Civil, Campina Grande, Brasil
autor
  • Universidade de Brasilia, Faculty of Techonology, Campus Universitário Darcy Ribeiro, Brasilia, Brasil
  • Universidad Distrital Francisco José de Caldas, Faculty of Environment and Natural Resources, Bogotá, Colombia
Bibliografia
  • [1] J.-H. Tay, K.-Y. Show, Utilization of municipal wastewater sludge as building and construction materials, Resources. Conservation and Recycling. 6 (1992) 191-204.
  • [2] A.O. Babatunde, Y.Q. Zhao, Constructive approaches toward water treatment works sludge management: an international review of beneficial reuses, Critical Reviews in Environmental Science and Technology. 37 (2007) 129-164.
  • [3] M. Alqam, A. Jamrah, H. Daghlas, Utilization of cement incorporated with water treatment sludge, Jordan Journal of Civil Engineering. 5 (2011) 268-277.
  • [4] M. Kyncl, Opportunities for water treatment sludge re-used, GeoScience Engineering, LIV 1 (2008) 11-22.
  • [5] A.M. Almeida, E. Yukio, B. Wada, J.C. Wasserman, Volumetric modeling of two sludge piles from water treatment plants in a Brazilian, Water Science & Technology. (2017) 1-9.
  • [6] L.C. Lucena, J.F. Juca, J.B. Soares, P.G. Filho, Use of wastewater sludge for base and subbase of road pavements, Trasportation Ressearch Part D 33. 33 (2014) 210-219.
  • [7] Y. Algamal, N.M. Khalil, Q.M. Saleem, Usage of the sludge from water treatment plant in brick-making industry, Journal of Chemical Technology and Metallurgy. 53 (2018) 504-510.
  • [8] A. Kelessidis, A.S. Stasinakis, Comparative study of the methods used for treatment and final disposal of sewage sludge in European countries, Waste Managemet. 32 (2012) 1186-1195.
  • [9] M.G. Lucena, L.C., Juca, J.F.T, Soares, J.B., Barroso, S.H., Portella, Characterization and evaluation of the potential use of sludge from STP and WTP in paving, Jorunal of the Brazilian Association of Agricultural Engineering. 35 (2016) 166-178.
  • [10] M. Cherifi, S. Hazourli, S. Pontvianne, J.P. Leclerc, F. Lapicque, Electrokinetic removal of aluminum from water potabilization treatment sludge, Desalination. 281 (2011) 263-270.
  • [11] X. Liu, F. Chang, C. Wang, Z. Jin, J. Wu, J. Zuo, K. Wang, Pyrolysis and subsequent direct combustion of pyrolytic gases for sewage sludge treatment in China, Applied Thermal Engineering. 128 (2018) 464-470.
  • [12] A.M. Hidalgo, M.D. Murcia, M. G, Gómez, M. Gómez, García-Izquierdo, C. Possible Uses for Sludge from Drinking Water Treatment Plants, Journal of Environmental Engineering. 143 (2016) 1-7.
  • [13] State, Brazilian water and waste mangement company owned by São Paulo. http://site.sabesp.com.br/site/imprensa/explicacoes/esgotamento (accessed 07 august 2018), (2015).
  • [14] T. Ahmad, K. Ahmad, M. Alam, Characterization of Water Treatment Plant’s Sludge and its Safe Disposal Options, Procedia Environmental Sciences. 35 (2016) 950-955.
  • [15] C.H. Weng, D.F. Lin, P.C. Chiang, Utilization of sludge as brick materials, Advances in Environmental Research. 7 (2003) 679-685.
  • [16] B. Kramer, Re-use of potable water sludge replacing iron salts in waste water treatment and industrial applications, LIFE96 ENV/NL/000211 Proj. (1996).
  • [17] M.H. Al Sayed, I.M. Madany, A.R.M. Buali, Use of sewage sludge ash in asphaltic paving mixes in hot regions, Construction and Building Materials. 9 (1995) 19-23.
  • [18] Eurostat. Sewage sludge production and disposal from urban wastewater (in dry substance (d.s)). http://ec.europa.eu/eurostat/tgm/refreshTableAction.do?tab=table&plugin=1&pcode=ten000 30&language=en (accessed 07 august 2018), (2015).
  • [19] L. 12305, Política Nacional de Resíduos Sólidos, 2010. http://www.planalto.gov.br/ccivil_03/leis/L7802.htm.
  • [20] L. Christiane, D.F. Lopes, J. Fernando, T. Juca, J.B. Soares, M.G. Portela, Potential Uses of Sewage Sludge in Highway Construction, Journal of Materials in Civil Engineering. 26 (2014) 1-7.
  • [21] CNT, Pesquisa CNT de rodovias 2017: Relatório gerencial, 2017.
  • [22] E.V.M. Carrasco, M.D.C. Magalhaes, W.J.D. Santos, R.C. Alves, J.N.R. Mantilla, Characterization of mortars with iron ore tailings using destructive and nondestructive tests, Construction and Building Materials. 131 (2017) 31-38.
  • [23] J. Bolden, T. Abu-Lebdeh, E. Fini, Utilization of recycled and waste materials in various construction applications, American Journal of Environmental Science. 9 (2013) 14-24.
  • [24] M. Smol, J. Kulczycka, A. Henclik, K. Gorazda, Z. Wzorek, The possible use of sewage sludge ash (SSA) in the construction industry as a way towards a circular economy, Journal of Clean Production. 95 (2015) 45-54.
  • [25] H. El-Didamony, K.A. Khalil, M. Heikal, Physico-chemical and surface characteristics of some granulated slag-fired drinking water sludge composite cement pastes, Housing and Building National Research Center. 10 (2014) 73-81.
  • [26] J.J. de Oliveira Andrade, M.C. Wenzel, G.H. da Rocha, S.R. da Silva, Performance of rendering mortars containing sludge from water treatment plants as fine recycled aggregate, Journal of Clean Production. 192 (2018) 159-168.
  • [27] O. Kizinievič, R. Žurauskiene, V. Kizinievič, R. Žurauskas, Utilisation of sludge waste from water treatment for ceramic products, Construction and Building Materials. 41 (2013) 464-473.
  • [28] K.Y. Chiang, P.H. Chou, C.R. Hua, K.L. Chien, C. Cheeseman, Lightweight bricks manufactured from water treatment sludge and rice husks, Journal of Hazard Materials. 171 (2009) 76-82.
  • [29] T.F. Moo-Young, H.K. Zimimie, Geotechnical propeties of paper mill sludges for use in landfill covers, Journal of Geotechnical Engineering. 122 (1996) 768-775.
  • [30] L. Chen, D. Lin, Stabilization treatment of soft subgrade soil by sewage sludge ash and cement, Journal of Hazardous Materials, 162 (2009) 321-327.
  • [31] J. James, P.K. Pandian, Soil Stabilization as an Avenue for Reuse of Solid wastes: Areview, Acta Technica Napocensis: Civil Engineering & Architecture, 58 (2015).
  • [32] M.M. Rondón, H.A., Ruge, J.C., Farias, Behavior of a hot mix asphalt containing blast furnace slag as aggregate: evaluation by mass and volume substitution., Journal of Materials in Civil Engineering. Accepted to Publish. (2019).
  • [33] I.L. Doyle, J.D. Howard, Characterization of dense-graded asphalt with the Cantabro test., Journal of Testing and Evaluation. 44 (2016) 77-88.
  • [34] B.C. Cox, B.T. Smith, I.L. Howard, R.S. James, State of Knowledge for Cantabro Testing of Dense Graded Asphalt, Journal of Materials in Civil Engineering. 29 (2017).
  • [35] R. Muniandy, E.E. Aburkaba, Effect of Filler Type and Particle Size on Asphalt-filler Mastic and Stone Mastic Asphalt Labo ratory Measured Properties, Australian Journal of Basic and Applied. 7 (2013) 475-487.
Uwagi
Opracowanie rekordu ze środków MNiSW, umowa Nr 461252 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2020).
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-bebcb9fe-0c9f-4dbf-8bf1-84faeb04f218
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.