PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

System for analysis and correction of motor management

Treść / Zawartość
Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
The innovative system, which was developed for analysis and correction of motor management, is determined for the solution of practical problems concerning the operation of the piston combustion engines. Programming of the ignition curves and fuel maps without relevant feedback, namely, without information obtained from the engine operation, increases the risk of detonation combustion, which can destroy the combustion engine. However, the main application area of this system is the development of an algorithm, which is specified for control of the combustion process based on the HCCI technology (Homogenous Charge Compression Ignition). Nowadays, the functional principle of the HCCI engine is one of the most effective possibilities on how to reach higher operational efficiency of the gasoline engine, that is, closer to the efficiency level of the diesel driving units.
Słowa kluczowe
EN
PL
Rocznik
Tom
Strony
129--136
Opis fizyczny
Bibliogr. 16 poz.
Twórcy
  • Faculty of Mechanical Engineering, Technical University of Košice, Letná 9, 04001 Košice, Slovakia
  • Faculty of Mechanical Engineering, Technical University of Košice, Letná 9, 04001 Košice, Slovakia
  • Faculty of Mining, Ecology, Process Control and Geotechnology, Technical University of Košice, Park Komenského 19, 04001 Košice, Slovakia
  • Faculty of Mechanical Engineering, Technical University of Košice, Letná 9, 04001 Košice, Slovakia
Bibliografia
  • 1. Puskar Michal, Peter Bigos, Michal Kelemen, Roman Tornhajzer, Martin Sima. 2014. „Measuring method for feedback provision during development of fuel map in hexadecimal format for high-speed racing engines”. Measurement 50: 203-212. DOI: 10.1016/J.MEASUREMENT.2014.01.005.
  • 2. Brestovic Tomas, Natalia Jasminska, Maria Carnogurská, Michal Puskar, Michal Kelemen, Milan Filo. 2014. „Measuring of thermal characteristics for Peltier thermopile using calorimetric method”. Measurement 53: 40-48. DOI: https://doi.org/10.1016/j.measurement.2014.03.021.
  • 3. Wierzbicki Sławomir. 2019. “Evaluation of the effectiveness of on-board diagnostic systems in controlling exhaust gas emissions from motor vehicles”. Diagnostyka 20(4): 75-79.
  • 4. Czech Piotr. 2013. „Intelligent Approach to Valve Clearance Diagnostic in Cars”. Communications in Computer and Information Science 395: 384-391. DOI: https://doi.org/10.1007/978-3-642-41647-7_47. Springer, Berlin, Heidelberg. ISBN: 978-3-642-41646-0; 978-3-642-41647-7. ISSN: 1865-0929. In: Mikulski Jerzy (eds), Activities of transport telematics, 13th International Conference on Transport Systems Telematics, Katowice Ustron, Poland, October 23-26, 2013.
  • 5. Puskar Michal, Tomas Brestovic, Natalia Jasminska. 2015. „Numerical simulation and experimental analysis of acoustic wave influences on brake mean effective pressure in thrust-ejector inlet pipe of combustion engine”. International Journal of Vehicle Design 67(1): 63-76. DOI: https://doi.org/ 10.1504/ijvd.2015.066479.
  • 6. Czech Piotr. 2011. „Diagnosing of disturbances in the ignition system by vibroacoustic signals and radial basis function - preliminary research”. Communications in Computer and Information Science 239: 110-117. DOI: https://doi.org/10.1007/978-3-642-24660-9_13. Springer, Berlin, Heidelberg. ISBN: 978-3-642-24659-3. ISSN: 1865-0929. In: Mikulski Jerzy (eds), Modern transport telematics, 11th International Conference on Transport Systems Telematics, Katowice Ustron, Poland, October 19-22, 2011.
  • 7. Czech Piotr. 2013. „Diagnosing a car engine fuel injectors' damage”. Communications in Computer and Information Science 395: 243-250. DOI: https://doi.org/10.1007/978-3-642-41647-7_30. Springer, Berlin, Heidelberg. ISBN: 978-3-642-41646-0; 978-3-642-41647-7. ISSN: 1865-0929. In: Mikulski Jerzy (eds), Activities of transport telematics, 13th International Conference on Transport Systems Telematics, Katowice Ustron, Poland, October 23-26, 2013.
  • 8. Dodok Tomas, Nadezda Cubonova, Miroslav Cisar, Ivan Kuric, Ivan Zajacko. 2017. „Utilization of strategies to generate and optimize machining sequences in CAD/CAM“. 12th International scientific conference of young scientist on suitable, modern and safe transport 192: 113-118. May 31-June 02, 2017. High Tatras, Slovakia. DOI: 10.1016/j.proeng.2017.06.020.
  • 9. Kuric Ivan, Miroslav Cisar, Vladimir Tlach, et al. 2018. „Technical Diagnostics at the Department of Automation and Production Systems“. 2nd International Conference on Intelligent Systems in Production Engineering and Maintenance (ISPEM) 835: 474-484. Sep 17-18, 2018. Wroclaw, Poland.
  • 10. Puskar Michal, Andrej Jahnatek, Ivan Kuric, et al. 2019. „Complex analysis focused on influence of biodiesel and its mixture on regulated and unregulated emissions of motor vehicles with the aim to protect air quality and environment”. Air Quality Atmosphere And Health 12(7): 855- 864.
  • 11. Brezinova Janette., Anna Guzanova. 2012. „Possibilities of utilization high velocity oxygen fuel (HVOF) coatings in conditions of thermal cycling loading“. Metalurgija 51(2): 211-215.
  • 12. Zivcak Jozef, Martin Sarik, Radovan Hudak. 2016. „FEA simulation of thermal processes during the direct metal laser sintering of Ti64 titanium powder“. Measurement 94: 893-901. DOI: 10.1016/j.measurement.2016.07.072.
  • 13. Toth Teodor, Radovan Hudak, Jozef Zivcak. 2015. „Dimensional verification and quality control of implants produced by additive manufacturing“.Quality innovation prosperity - Kvalita inovacia prosperita 19(1): 9-21. DOI: 10.12776/QIP.V19I1.393.
  • 14. Homisin Jaroslav, Peter Kassay, Michal Puskar, Robert Grega, Jozef Krajnak, Matej Urbansky, Marek Moravic. 2016. „Continuous tuning of ship propulsion system, by means of pneumatic tuner of torsional oscillation. Transactions of the Royal Institution of Naval Architects Part A: International Journal of Maritime Engineering 378. DOI: 10.3940/RINA.IJME.2016.A3.378.
  • 15. Puskar Michal, Andrej Jahnatek, Jaroslava Kadarova, et al. 2019. „Environmental study focused on the suitability of vehicle certifications using the new European driving cycle (NEDC) with regard to the affair “dieselgate” and the risks of NOx emissions in urban destinations“. Air Qual Atmos Health 12: 251-257. DOI: https://doi.org/10.1007/s11869-018-0646-5.
  • 16. Puskar Michal, Michal Fabian, Jaroslava Kadarova, Peter Blistan, Melichar Kopas. 2017. „Autonomous vehicle with internal combustion drive based on the homogeneous charge compression ignition technology“. International Journal of Advanced Robotic Systems 14(5): 1-8. DOI: 10.1177/1729881417736896.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-beb012a1-4137-45e6-b46d-f88aec5f6020
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.