Microstructure and hardness of Pyrowear 53 steel after low-pressure vacuum carburizing at 921°C

• Autorzy: Wojtyczka Artur , Iżowski Bartosz

Identyfikatory

DOI

10.2478/amst-2019-0020

• Języki publikacji: EN

Abstrakty

EN

The present paper studies and analyzes the low-pressure vacuum carburizing of Pyrowear 53 steel. The carburizing was performed at 921°C. The results after the completion of the treatment process are presented, i.e. microstructure of the surface layer and hardness. The results confirm that carburizing can be effectively used in hardening of the steel.

Słowa kluczowe

EN

low-pressure carburizing; diffusion; Pyrowear 53 steel

PL

nawęglanie niskociśnieniowe; dyfuzja; stal Pyrowear 53

• Wydawca: Komitet Budowy Maszyn PAN ; De Gruyter
• Czasopismo: Advances in Manufacturing Science and Technology
• Rocznik: 2020
• Tom: Vol. 44, nr 4
• Strony: 109--112
• Opis fizyczny: Bibliogr. 15 poz., rys., tab., wykr.

Twórcy

autor

Wojtyczka Artur

• Faculty of Mechanical Engineering and Aeronautics, Rzeszow University of Technology, al. Powstanców Warszawy 12, 35-959 Rzeszów, Poland
• Pratt & Whitney Rzeszow, Rzeszow, Poland

autor

Iżowski Bartosz

• Faculty of Mechanical Engineering and Aeronautics, Rzeszow University of Technology, al. Powstanców Warszawy 12, 35-959 Rzeszów, Poland
• Pratt & Whitney Rzeszow, Rzeszow, Poland

Bibliografia

• [1] T. Burakowski, T. Wierzchoń: Inżynieria powierzchni metali. Wydawnictwo Naukowo-Techniczne, Warszawa 1995.
• [2] N.M. Ryzhov, et al.: Metal Science and Heat Treatment., 52(2010), 260.
• [3] B. Wierzba, et al.: HTMP, 34(2015), 373.
• [4] K. Dychton, et al.: Solid State Phenomena., 227(2015), 425.
• [5] A. Freborg, B. Ferguson, Z. Li: 6th Int. Conf. Quenching and Control of Distortion, ASM 2012.
• [6] P. Kula: Postęp w technologii nawęglania, Inżynieria Materiałowa, 21(2000), 101.
• [7] R.U. Khan, et al.: Pyrolysis of propane under vacuum carburizing conditions: An experimental and modeling study. J. Anal. Appl. Pyrolysis, 81(2008), 148.
• [8] J.R. Davis: Surface hardening of steels: understanding the basics. 2nd Ed. ASM International, Materials Park, OH 2002.
• [9] P. Kula, et al.: Carburizing: deep, case structure and process technology. In: Encyclopedia of iron, steel, and their alloys. CRC Press 2016, 615-30.
• [10] Aerospace Material Specification AMS6308 Rev
• [11] J. Grosch: Fatigue resistance of carburized and nitrided steels. In: Thermochemical surface engineering of steels. Elsevier 2015.p 209-40
• [12] B. Edenhofer, M. Lohrmann, W. Gräfen: Novel thermochemical diffusion processes in vacuum furnaces for steel components. 20th ASM Heat Treat. Soc. Conf. Proc., ASM International 2000.
• [13] W. Gräfen, B. Edenhofer: Acetylene low-pressure carburizing-a novel and superior carburizing technology. Heat Treat. Met. 26(1999), 79.
• [14] S. Azuar, et al.: Surface & Coatings Technology Improving surface properties and wear behaviors of duplex stainless steel via pressure carburizing. Surf. Coat. Technol. 210(2012), 142.
• [15] P.S. Prevéy: Residual Stress in Design, Process and Materials selection. ASM International,19 1987.

Uwagi

Opracowanie rekordu ze środków MNiSW, umowa Nr 461252 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2021).