Development of the Module for Real-Time Verification of NC Machining Program

• Autorzy: Milojevic Z. , Navalusic S. , Zeljkovic M.
• Języki publikacji: EN

Abstrakty

EN

In the simulation and verification of the NC machining programs most often approaches are: exact and approximate approach. For real-time NC machining program verification, only approximate approaches are suitable, by the reason of simulation cost O(N)( simulation time grows linearly with the number of tool movements). For the real-time purpose simulation it is important that simulation is not view-depended and animation should be smooth by 25 frames per second. In this paper a developed module for approximate approach verification of generated NC machine program for three axis milling is presented, based on dexels. Workpiece and tool are approximated by dexels, which are connected by triangular mesh. Depends on the computer hardware, workpiece and tool resolution may vary. This approach enables that tool and workpiece could be arbitrary shape. System is developed by use of 3D graphics library OpenGL which also, enables a stereo viewing, and that fact could be important in virtual reality era today. Machined workpiece could be transferred as a polygonal mesh in the some of commercial CAD systems for afterward analysis.

Słowa kluczowe

EN

3-axis milling; dexel structure; NC machining program verification

• Wydawca: Wydawnictwo Wrocławskiej Rady FSNT NOT
• Czasopismo: Journal of Machine Engineering
• Rocznik: 2007
• Tom: Vol. 7, No. 1
• Strony: 51--60
• Opis fizyczny: Bibliogr. 13 poz., rys.

Twórcy

autor

Milojevic Z.

• Institute for Production Engineering, Faculty of Technical Sciences, V. Perica Valtera 2, 21000 Novi Sad, Serbia

autor

Navalusic S.

• Institute for Production Engineering, Faculty of Technical Sciences, V. Perica Valtera 2, 21000 Novi Sad, Serbia

autor

Zeljkovic M.

• Institute for Production Engineering, Faculty of Technical Sciences, V. Perica Valtera 2, 21000 Novi Sad, Serbia

Bibliografia

• [1] CHUNG Y C., PARK J W., SHIN H , CHOI B., Modeling the surface swept by a generalized cutler for NC verification, Computer-Aided Design, Vol.30, No.8, Elsevier Science, 1998., pp. 587-594.
• [1] ESTERLING D., JERARD R., Smart Machining, Vulcancraft Virtual Manufacturing Studio. 6
• [2] FLEIS1G R.V., SPENCE A.D., Techniques for accelerating B-rep based parallel machining simulation, Computer- Aided Design No.37, pp. 1229-1240, 2005
• [3] HUANG Y., OLIVER J.H., NC milling error assessment and tool path correction, Computer Graphics Proceedings (SIGGRAPH ’94), pp. 287-294, 1994.
• [4] JERARD R.B., HUSSAINI S.Z., DRYSDALE R.L., SCHAUDT B., Approximate methods for simulation and verification of mimericallv controlled machining programs, The Visual Computer 5, Springer-Verlag 1989, pp. 329-348.
• [5] KÖNIG A., GRÖLLER E., Rea! Time Simulation and Visualization of NC Milling Processes for Inhomogeneous Materials on Low-End Graphics Hardware, Technical Report TR-186-2-98-04, Institute of Computer Graphics, Vienna University of Technology, January, 1998
• [6] MILOJEVIC Z., NAVALUSIC S., ZELJKOVIC M., An Exact Approach to 3-Axis Milling NC Simulation and Verification. Journal Manufacturing Engineering Vol.3, No.5, Kosicah, 2006., pp. 14-17.
• [7] MILOJEVIC Z., NAVALUSIC S., ZELJKOVIC M., Development of the Module for Verification of NC Machining Program, Journal of Machine Engineering, Vol.5, No. 1-2, Intelligent machines and factories, Wroclav, 2005.
• [8] MILOJEVIC Z., System for machine tools workspace visualization in the real-time, approved PhD, thesis, Faculty of technical sciences, Novi Sad, 2004.
• [9] NAVALUSIC S., MARJANOVIC N., GATALO R , MILOJEVIC Z , Product Design Methodology Based on Expert and Conventional Computer Aided Approach integration, X International Conference on Supervising and Diagnostic of Machining System - Innovative and Integrated Manufacturing, Proceedings, Wroclaw, Poland, 1999.. pp 150-157.
• [10] SAITO T., TAKAHASHI T., NC machining with G-Buffer method. Computer Graphics, Vol. 25, No. 4, Proc SIGGRAPH’91, 1991., pp. 207-216.
• [11] VAITI N., The Benefits of Virtual Manufacturing, Journal of CNC Machining, Vol. 4, No. 12, 2000. 5
• [12] VAN HOOK T., Real-time shaded NC milling display, Computer Graphics, SIGGRAPH Proceedings, Vol. 20, No 4, 1986, pp. 15-20
• [13] VOECKLER HB ., HUNT WA., The role of solid modeling in machining process modeling and NC verification, SAE Tech Paper 810195, 1981.

Uwagi

podwójna numeracja poz. [1]