The Structure and Characteristics of Tribological Systems with Diamond Like Carbon Coatings under Ionic Liquid Lubrication Conditions

• Autorzy: Madej M. , Ozimina D. , Kasińska J. , Hawlena J.

Identyfikatory

DOI

10.1515/amm-2016-0195

• Języki publikacji: EN

Abstrakty

EN

The results from the tests on tribological a-C:H diamond coatings deposited by PACVD (plasma assisted chemical vapour deposition) on 100Cr6 steel components are presented in this work. Mechanical properties - nanohardness and Young’s modulus - were assessed by instrumented indentation. Tribological tests were conducted with T-01M tester in a ball-on-disc test under dry and boundary friction conditions. Selected ionic liquids - synthetic new generation lubricants - were used for lubrication. The results from the experiments indicate that diamond-like coatings improved tribological characteristics of the friction pairs tested, with the ionic liquids intensifying this effect.

Słowa kluczowe

EN

diamond-like carbon coatings; ionic liquids; SEM; nanoindentation; friction; tribological wear

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2016
• Tom: Vol. 61, iss. 2B
• Strony: 1169--1174
• Opis fizyczny: Bibliogr. 20 poz., rys., tab., wykr., wzory

Twórcy

autor

Madej M.

• Kielce University of Technology, 7th Tysiąclecia P. P. Av. 25-314 Kielce, Poland

autor

Ozimina D.

• University of Life Sciences in Lublin, Poland

autor

Kasińska J.

• Kielce University of Technology, 7th Tysiaclecia P. P. Av. 25-314 Kielce, Poland

autor

Hawlena J.

• University of Life Sciences in Lublin, Poland

Bibliografia

• [1] R. Burdzik, Ł. Konieczny, B. Łazarz, Acta Metallurgica Slovaca - Conference 4, 198 (2014)
• [2] Stachowiak, W. Zwierzycki, Tribology International 44, 1216 (2011).
• [3] M. Madej, Wear 317(1-2), 179 (2014).
• [4] R. Michalczewski, W. Piekoszewski, M. Szczerek, W. Tuszyński, Tribology International 42, 554 (2009).
• [5] M. Madej, D. Ozimina, K. Kurzydłowski, T. Płociński, P. Wieciński, M. Styp-Rekowski, M. Matuszewski, Transactions of FAMENA 39(1), 79 (2015).
• [6] E. Zdravecká, V.Tiainen, Y. Konttinen, L. Franta, M. Vojs, M. Marton, M. Ondác, J. Tkácová, Vacuum 86, 675 (2012).
• [7] M. Madej, D. Ozimina, I. Piwoński, A. Kisielewska, Metallic Materials 4, 297 (2012).
• [8] M. Abdollah, Y. Yamaguchi, T. Akao, N. Inayoshi, N. Miyamoto, T. Tokoroyama, N. Umehara, Wear 274-275, 435 (2012).
• [9] R. Michalczewski, W. Piekoszewski, Finish J. of Tribology 26, 9 (2007).
• [10] K. Holmberg, H. Ronkainen, M. Matthews, Ceramics International 26, 787 (2000).
• [11] M. Madej, K. Marczewska-Boczkowska, D. Ozimina, Przemysł Chemiczny 93(4), 500 (2014).
• [12] S. Aisenberg, R. Chabot, Journal of Applied Physics 42, 2953 (1971).
• [13] C. Donnet, A. Erdemir (Eds.), Tribology of diamond-like carbon films. Fundametals and applications, New York 2008.
• [14] F. Zhiqiang, S. Jian, W. Chengbiao, Z. Wei, Y. Wen, P. Zhijian, Y. Xiang, L. Songsheng, D. Mingjiang, Vacuum 94, 14 (2013).
• [15] M. Kot, B. Major, J. M. Lackner, Materials and Design 51, 280 (2013).
• [16] P. Wasserscheid, T. Welton, Ionic Liquids in Synthesis, Weinheim 2008.
• [17] I. Minami, Molecules 14, 2286 (2009).
• [18] M. Kosmulski, J. Rosenholm, C. Saneluta, K. Marczewska-Boczkowska, J. Colloid Interface Sci. 291(1), 214 (2005).
• [19] F. Zhou, Y. Liang, W. Liu, Chem. Soc. Rev. 38, 2590 (2009).
• [20] T. Predel, B. Pohrer, E. Schluckre, Chem. Eng. Tech. 33, 132 (2010).

Uwagi

PL

Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę