Torque simulation in a reluctance motor design incorporating HTS materials in both stator and rotor parts

• Autorzy: Bouchekhou Hocine , Mekideche Mohamed Rachid , Lévêque Jean

Identyfikatory

DOI

10.15199/48.2019.09.18

Warianty tytułu

PL

Symulacja momentu w silniku reluktancyjnym wykorzystującym nadprzewodnik HTS w stojanie i wirniku

• Języki publikacji: EN

Abstrakty

EN

In this work, a fully high temperature superconducting reluctance motor (HTS RM) is studied. A smallest configuration of HTS armature winding based on the mechanical characteristics of HTS BSCCO tape is determined. Furthermore, a novel rotor topology of single HTS YBCO bulk with ferromagnetic material is proposed. Electromagnetic torque of HTS RM is calculated by finite element method (FEM) with 2D consideration. The characteristics of the bipolar HTS RM are compared with a conventional motor with HTS rotor.

PL

Opisano silnik reluktancyjny z elementami wykonanymi z wysokotemperaturowego nadprzewodnika. Do uzwojenia wykorzystano taśmę HTS BSCCO. Zaproponowano też nową konstrukcję wirnika z materiału HTS YBCO. Obliczono moment elektromagnetyczny wykorzystując metodę elementów skończonych.

Słowa kluczowe

EN

superconducting reluctance motor; HTS BSCCO tape; YBCO bulk; finite elements method; torque calculation

PL

silnik reluktancyjny; nadprzewodnik HTS; metoda elementów skończonych

• Wydawca: Wydawnictwo SIGMA-NOT
• Czasopismo: Przegląd Elektrotechniczny
• Rocznik: 2019
• Tom: R. 95, nr 9
• Strony: 94--97
• Opis fizyczny: Bibliogr. 18 poz., rys., tab.

Twórcy

autor

Bouchekhou Hocine

• University of Jijel, Faculty of science and Technology, L2EI Laboratory, B.P 98 Ouled Aissa Jijel, Algeria

autor

Mekideche Mohamed Rachid

• University of Jijel, Faculty of Science and Technology, L2EI Laboratory, B.P 98 Ouled Aissa Jijel, Algeria

autor

Lévêque Jean

• University of Lorraine, Faculty of Sciences and Technologies, GREEN Laboratory, France

Bibliografia

• [1] Feng Lin, Rong Hai Qu and Da Wei Li, “Topologies for fully superconducting machines”, Proceedings of IEEE International Conference on Applied Superconductivity and Electromagnetic Devises (ASEMD)”, Shanghai, China, November.20-23, 2015.
• [2] Mark Ainslie, Mitsuru Izumi and Motohiro Miki, “Recent advances in superconducting rotating machines: an introduction to the Focus on Superconducting Rotating Machines”, Superconductor Science and Technology, Vol. 29, No. 6, id.060303, 2016.
• [3] K. S. Haran, S. Kalsi, T. Arndt, H. karmaker, R. Badcock, B. Buckley, T. Haugan, M. Izumi, D. Loder, J. W. Bray, P. Masson and E. W. Stautner, “High power density superconducting rotating machines-Development status and technology roadmap”, Superconductor Science and Technology, Vol. 30, No. 12, id.123002, 2017.
• [4] K. Kovalev, N. Ivanov, I. Kobzeva, E. Tulinova, “High specific power HTS eclectic machines”, PRZEGLAD ELEKTROTECHNICZNY, Volume 93, Issue 11, 2017, pages 125-128.
• [5] L. K. Kovalev, K. V. Ilushin, K. L. Kovalev, V. T. Penkin, V. N. Poltavets, S. M-A. Koneev, I. I. Akimov, W. Gawalek, B. Oswald and G. Krabbes, “High output power of eclectic motors with bulks HTS elements”, Physica C: superconductivity, Vol. 386, 419-423, 2003.
• [6] S. D. Chu, and S. Torii, “Torque-speed characteristics of superconducting synchronous reluctance motors with DyBCO bulk in the rotor”, IEEE transactions on applied superconductivity, Vol. 15, No. 2, 2178-2181, 2005.
• [7] M. Qiu, Z. Xu, Z. H. Yao, D. Xia, L. Z. Lin, G. M. Zhang, L. Xiao, H. T. Ren, Y. L. Jiao and M. H. Zheng, “Design and performance of a small HTS bulk reluctance motor”, IEEE transactions on applied superconductivity, Vol. 15, No. 2, 1480-1483, 2005.
• [8] A. L. Rodrigues, and A. J. Pires, “Reluctance machines incorporating high temperature superconducting materials on the rotor”, Physica C: Superconductivity, Vol. 470, No. 2, 98-103, 2010.
• [9] L. K. Kovalev, K. V. Ilushin, V. T. Penkin, K. L. Kovalev, A. E. Larionoff, S. M-A. Koneev, K. A. Modestov, S. A. Larionoff, V. N. Poltavets, I. I. Akimov, V. V. Alexandrov, W. Gawalek, B. Oswald and G. Krabbes, “High output power reluctance electric motors with bulk high-temperature superconductor elements”, Superconductor Science and Technology, Vol. 15, No. 5, 817-822, 2002.
• [10] B. Oswald, K. J. Best, M. Setzer, M. Söll, W. Gawalek, A. Gutt, L. Kovalev, G. Krabbes, L. Fisher and H. C. Freyhardt, “Reluctance motors with bulk HTS material”, Superconductor Science and Technology, Vol. 18, No. 2, S24-S29, 2004.
• [11] K. Kajikawa, Y. Uchida, M. Hosseina, T. Nakamura, H. Kobayashi, T. Wakuda and K. Tanaka, “Development of Stator Windings for Fully Superconducting Motor With MgB2 Wires”, IEEE Transactions on Applied Superconductivity, Vol. 23, No. 3, 5201604-5201604, 2013.
• [12] B. Liu, R. Badcock, H. Shu and J. Fang, “A Superconducting Induction Motor with a High Temperature Superconducting Armature: Electromagnetic Theory, Design and Analysis”, Energies, Vol. 11, No. 4, 792-792, 2018.
• [13] N. Ayai, S. obayashi, M. Kikuchi, T. Ishida, J. Fujikami, K. Yamazaki, S. Yamade, K. Tatamidani, K. Hayashi, K. Sato, H. Kitaguchi, H. Kamakura, K. Osamura, J. Shimoyama, H. Kamijyo and Y. Fukumoto “Progress in performance of DIBSCCO family”, Physica C: Superconductivity, Vol. 468, No. 15-20, 1747-1752, 2008.
• [14] N. K. Paramoda, U. Prasad, A. Amardas, D. Patel and S. Pradhan, “Design and fabrication of a high Tc BSCCO based square helmholtz coil”, Journal of Physics: Conference Series, Vol. 208, No. 1, 012021, 2010.
• [15] D. Meeker, “Finite element method magnetics: User's Manual”, version 4.2 , Octobre 2015.
• [16] J. Min Park, S. Il Kim , J. Pyo Hong and J. Ho Lee, “Rotor design on torque ripple reduction for a synchronous reluctance motor with concentrated winding using response surface methodology”, IEEE Transactions on Magnetics, Vol. 42, No. 10, 3479-3481, 2006.
• [17] S. McFee, J.P. Webb and D.A. Lowther, “A tunable volume integration formulation for force calculation in finite-element based computational m agnetostatics”, IEEE transactions on magnetics, Vol. 24, No.1, 439-440, 1988.
• [18] S. Stavrev, F. Grilli, B. Dutoit and S. P Ashworth, “Comparison of the AC losses of BSCCO and YBCO conductors by means of numerical analysis”, Superconductor Science and Technology, Vol. 18, No. 10, 1300-1312, 2005.

Uwagi

Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2019).