PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

The influence of the reaction product formation inside the ceramic substrate on the interpretation of marker experiments

Autorzy
Wybrane pełne teksty z tego czasopisma
Identyfikatory
Warianty tytułu
PL
Wpływ powstawania fazy produktu reakcji w głębi substratu ceramicznego na interpretacje eksperymentu markerowego
Konferencja
Ogólnopolska Konferencja Naukowo-Techniczna "Antykorozja : Systemy - Materiały - Powłoki" (22 ; 09-11.04.2014 ; Ustroń-Jaszowiec, Polska)
Języki publikacji
EN
Abstrakty
EN
In the present paper the influence of the formation of higher sulphide (oxide) in the interior of the substrate, being the lower sulphide (oxide) of a given metal, on the results of marker experiments has been discussed. It has been shown that the correct interpretation of marker experiments in the case of the formation of reaction product not only on the surface but also inside of the substrate can be achieved, if all chemical reactions as well as transport processes occurring in the substrate-product system are considered. Theoretical analysis presented in this work have been illustrated by the results indicating a predominant disorder in the CoS2 disulphide, growing on the CoS monosulphide.
PL
W pracy omówiono wpływ procesu formowania się siarczku (tlenku), w którym metal jest na wyższym stopniu utlenienia, wewnątrz substratu będącego siarczkiem (tlenkiem) tego samego metalu znajdującego się na niższym stopniu utlenienia, na wynik w badaniach typu dominującego zdefektowania metodą markerów. Wykazano, że aby dokonać prawidłowej interpretacji eksperymentu markerowego w przypadku powstawania produktu reakcji nie tylko na powierzchni substratu lecz również w jego wnętrzu, należy wziąć pod uwagę wszystkie reakcje chemiczne oraz procesy transportowe mające miejsce w układzie substratprodukt reakcji. Rozważania teoretyczne przedstawione w niniejszej pracy zilustrowane zostały wynikami badań eksperymentalnych mechanizmu procesu siarkowania CoS do CoS2 metodą markerów.
Rocznik
Tom
Strony
147--149
Opis fizyczny
Bibliogr. 26 poz., rys.
Twórcy
autor
  • AGH University of Science and Technology, Faculty of Materials Science and Ceramics, Department of Physical Chemistry and Modelling, Krakow, Poland
autor
  • AGH University of Science and Technology, Faculty of Materials Science and Ceramics, Department of Physical Chemistry and Modelling, Krakow, Poland
Bibliografia
  • 1. L.B. Pfeil, J. Iron Steel Inst. 119 (1929) 501-547.
  • 2. L.B. Pfeil, J. Iron Steel Inst. 123 (1931) 237-258.
  • 3. K. Sachs, Metallurgia 54 (1956) 11-17.
  • 4. H. Engell, F. Wever, Acta Met. 5 (1957) 695-700.
  • 5. R. A. Meussner, C.E. Birchenall, Corrosion 13 (1957) 677-689.
  • 6. W. I. Archarow, E.B. Blankowa, Fiz. Miet. i Mietallowied. 8 (1959) 452-454.
  • 7. S. Mrowec, Z. phys. Chem. N. F. 29 (1961) 47-57.
  • 8. S. Mrowec, T. Werber, Corrosion Sci. 5 (1965) 717-727.
  • 9. S. Mrowec, Corrosion Sci. 7 (1967) 563-578.
  • 10. S. Mrowec, J. Mater. Sci. 2 (1976) 99-106.
  • 11. S. Mrowec, Defects and Diffusion in Solids, Elsevier Scientifi c Publ. Comp., Amsterdam-Oxford-New York, 1980.
  • 12. K. Przybylski, W.W. Smeltzer, J. Electrochem. Soc., 128(4) (1981) 897-902.
  • 13. S. Mrowec, The Influence of Secondary Processes on the Mechanism of Scales Growth on Metals and Alloys, in Transactions of the Japan Institute of Metals (JIMS-3), 1983, p. 69.
  • 14. R. A. Rapp, Metall. Trans. A 15 (1984) 765-782.
  • 15. P. Kofstad, High Temperature Corrosion, Elsevier Applied Science, London and New York, 1988.
  • 16. Z. Grzesik, K. Takahiro, S. Yamaguchi, K. Hashimoto, S. Mrowec, Corr. Sci. 37 (1995) 801-810.
  • 17. S. Mrowec, High Temp. Mater. Processes 24 (2005) 375-394.
  • 18. Z. Grzesik, M. Migdalska, S. Mrowec, High Temp. Mater. Processes 26 (2007) 355-364.
  • 19. Z. Grzesik, S. Mrowec, Corr. Sci. 50 (2008) 605-613.
  • 20. Z. Grzesik, M. Migdalska, S. Mrowec, High Temp. Mater. Processes 30 (2011) 277-287.
  • 21. Z. Grzesik, Termodynamika i kinetyka defektów w kryształach jonowych, Wydawnictwo Naukowe AKAPIT, Kraków, 2011.
  • 22. Z. Grzesik, G. Smoła, S. Mrowec, Ochrona przed Korozją 56 (2013) 531-534.
  • 23. A. Poczekajlo, Z. Grzesik, S. Mrowec, High Temp. Mater. Proc. DOI 10.1515/htmp-2013-0055, 2013.
  • 24. Z. Grzesik, S. Mrowec, T. Walec, J. Dąbek, Ochrona przed Korozją, 42 (1999) 63-67.
  • 25. Z. Grzesik, S. Mrowec, T. Walec, J. Dąbek, J. Thermal. Anal. Cal. 59 (2000) 985-997.
  • 26. H. Rau, J. Phys. Chem., 37 (1976) 931.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-bd5cc85b-0791-487c-bf48-0e52889a76b1
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.